Infoblox docker-ipam-plugin is a Docker Engine managed plugin that interfaces with Infoblox to provide IP Address Management services for Docker containers.
Infoblox docker-ipam-plugin is Docker Certified IPAM Plugin and is available at Docker store
To use the driver, you need access to the Infoblox DDI product. For evaluation purposes, you can download a virtual version of the product from the Infoblox Download Center (https://www.infoblox.com/infoblox-download-center) Alternatively, if you are an existing Infoblox customer, you can download it from the support site.
Refer to CONFIG.md on how to configure vNIOS.
Infoblox IPAM plugin can be configured in following ways:
- Adding parameters in a configuration file and setting
CONF_FILE_NAMEenvironment variable to the file name. - Setting all the plugin environment variables while installing the plugin.
The configuration options are:
| Environment Variable | Configuration File Option | Type | Description |
|---|---|---|---|
| CONF_FILE_NAME | - | - | Configuration file name in /etc/infoblox directory |
| DEBUG | - | - | Sets log level to debug |
| DOCKER_API_VERSION | - | - | Docker API version to use (Default : 1.22) |
| GRID_HOST | grid-host | String | IP of Infoblox Grid Host |
| WAPI_PORT | wapi-port | String | Infoblox WAPI Port (Default : "443") |
| WAPI_USERNAME | wapi-username | String | Infoblox WAPI Username |
| WAPI_PASSWORD | wapi-password | String | Infoblox WAPI Password |
| WAPI_VERSION | wapi-version | String | Infoblox WAPI Version (Default : "2.0") |
| SSL_VERIFY | ssl-verify | String | Specifies whether (true/false) to verify server certificate or not. If a file path is specified, it is assumed to be a certificate file and will be used to verify server certificate. |
| HTTP_REQUEST_TIMEOUT | http-request-timeout | Integer | Infoblox WAPI request timeout in seconds (Default : 60) |
| HTTP_POOL_CONNECTIONS | http-pool-connections | Integer | Infoblox WAPI request connection pool size (Default : 10) |
| GLOBAL_VIEW | global-view | String | Infoblox Network View for Global Address Space (Default : "default") |
| GLOBAL_NETWORK_CONTAINER | global-network-container | String | Subnets will be allocated from this container when --subnet is not specified during network creation |
| GLOBAL_PREFIX_LENGTH | global-prefix-length | Integer | The default CIDR prefix length when allocating a global subnet (Default : 24) |
| LOCAL_VIEW | local-view | String | Infoblox Network View for Local Address Space (Default : "default") |
| LOCAL_NETWORK_CONTAINER | local-network-container | String | Subnets will be allocated from this container when --subnet is not specified during network creation |
| LOCAL_PREFIX_LENGTH | local-prefix-length | Integer | The default CIDR prefix length when allocating a local subnet (Default : 24) |
If some option is passed in both the ways, then configuration passed as plugin environment variable overrides the configuration defined in the configuration file.
By default, the docker-ipam-plugin assumes that the "Cloud Network Automation" licensed feature is activated in NIOS. Should this not be the case, refer to "Manual Configuration of Cloud Extensible Attributes" in CONFIG.md for additional configuration required.
Plugin is installed by pulling the store/infoblox/ipam-plugin:1.1.0 from the docker store and setting its environment variables.
In Docker swarm mode the plugin needs to be installed on all the nodes.
Plugin can be configured with either of the following ways:
- Using the plugin configuration file
- Using the plugin environment variables
Create a file docker-infoblox.conf (configurable via CONF_FILE_NAME parameter) in /etc/infoblox/ directory and add the configuration options in the file.
A sample plugin configuration file looks like this:
[grid-config]
grid-host="10.120.21.150"
wapi-port="443"
wapi-username="infoblox"
wapi-password="infoblox"
wapi-version="2.0"
ssl-verify="false"
http-request-timeout=60
http-pool-connections=10
[ipam-config]
global-view="global_view"
global-network-container="172.18.0.0/16"
global-prefix-length=24
local-view="local_view"
local-network-container="192.168.0.0/20,192.169.0.0/22"
local-prefix-length=25
Set the CONF_FILE_NAME variable to this file name while installing the plugin.
$ docker plugin install --alias infoblox store/infoblox/ipam-plugin:1.1.0 \
CONF_FILE_NAME=docker-infoblox.conf
Plugin "store/infoblox/ipam-plugin:1.1.0" is requesting the following privileges:
- network: [host]
- mount: [/etc/infoblox]
- mount: [/var/run]
Do you grant the above permissions? [y/N]
The plugin requests the following privileges:
- access to the host network
- mounts /etc/infoblox directory on the host as a volume to container to read its configuration file
- mounts /var/run directory on the host as a volume to container to access docker socket file
To avoid the privileges request prompt pass the --grant-all-permissions option
$ docker plugin install --grant-all-permissions --alias infoblox \
store/infoblox/ipam-plugin:1.1.0 CONF_FILE_NAME=docker-infoblox.conf
- Plugin can be configured without configuration file by setting all the plugin environment variables while installing the plugin.
$ docker plugin install --grant-all-permissions --alias infoblox \
store/infoblox/ipam-plugin:1.1.0 GRID_HOST=10.120.21.150 \
WAPI_USERNAME=admin WAPI_PASSWORD=infoblox GLOBAL_VIEW=global_view \
GLOBAL_NETWORK_CONTAINER=172.18.0.0/16 LOCAL_VIEW=local_view \
LOCAL_NETWORK_CONTAINER=192.168.0.0/20 LOCAL_PREFIX_LENGTH=25
- To override a configuration file option with the plugin environment variable
$ docker plugin install --grant-all-permissions --alias infoblox \
store/infoblox/ipam-plugin:1.1.0 CONF_FILE_NAME=docker-infoblox.conf \
LOCAL_NETWORK_CONTAINER=172.16.10.0/24
Here LOCAL_NETWORK_CONTAINER overrides the local-network-container option in conf file.
- Inorder to set the plugin log level as debug, set the
DEBUGvariable
$ docker plugin install --grant-all-permissions --alias infoblox \
store/infoblox/ipam-plugin:1.1.0 CONF_FILE_NAME=docker-infoblox.conf DEBUG=true
To start using the plugin, a docker network needs to be created specifying the driver using the --ipam-driver option:
$ docker network create --ipam-driver=infoblox:latest priv-net
This creates a docker network called "priv-net" which uses "infoblox" as the IPAM driver and the default "bridge" driver as the network driver. A network will be automatically allocated from the list of network containers specified during plugin installation.
By default, the network will be created using the default prefix length specified during plugin installation. You can override this using the --ipam-opt option. For example:
$ docker network create --ipam-driver=infoblox:latest --ipam-opt="prefix-length=24" priv-net-2
Additionally, if you are deploying containers in a cluster, you can specify "network-name" using the --ipam-opt option. This will be used as an identifier so that docker networks created on different docker hosts can share the same IP address space. For example:
$ docker network create --ipam-driver=infoblox:latest --ipam-opt="network-name=blue" blue-net
This will allocate a network, say, 192.168.10.0/24, from the default address pool. Additionally, the network will be tagged in Infoblox with the network name "blue". Should the same command be issued on a different host, the driver will look for a network on Infoblox tagged with the same name, "blue", and will share the same network, 192.168.10.0/24, instead of allocating a new one.
After the network is created, Docker containers can be started attaching to the "priv-net" network created above. For example, the following command runs the container from "alpine" image:
$ docker run -it --network priv-net alpine /bin/sh
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
49: eth0@if50: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP
link/ether 02:42:ae:aa:e4:1c brd ff:ff:ff:ff:ff:ff
inet 192.168.3.2/25 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::42:aeff:feaa:e41c/64 scope link
valid_lft forever preferred_lft forever
/ #
Inoder to use an existing NIOS network as a Docker network, add an EA "Network Name" to that network and then pass the EA value as ipam-opt while creating the Docker network.
For example if there is a network "172.56.121.0/24" with gateway "172.56.121.1" already existing, then add an EA "Network Name" for the network with value as "SomeNetwork" in NIOS. Then create the Docker network:
docker network create --ipam-driver=infoblox:latest --subnet 172.56.121.0/24 --gateway 172.56.121.1 --ipam-opt="network-name=SomeNetwork" SomeNetwork
Currently the plugin supports only the MACVLAN network driver with swarm scope. Before performing the following steps, the plugin needs to be installed on all the swarm nodes.
- Create a config only network on all the nodes
sudo docker network create --config-only -o parent=eth1 --ipam-driver=infoblox:latest --ipam-opt="network-name=docker-macvlan" mv-config
- Create MACVLAN network with swarm scope on the swarm manager node
sudo docker network create -d macvlan --scope=swarm --config-from mv-config --attachable swarm-macvlan
- Run service with the swarm network
sudo docker service create --replicas 3 --network swarm-macvlan --name swarm-macvlan-test chrch/docker-pets:1.0
- Verify the IPs allocated to the containers of the service
master $ sudo docker network inspect --verbose --format '{{json .Services}}' swarm-macvlan | python -m json.tool
{
"swarm-macvlan-test": {
"LocalLBIndex": 262,
"Ports": [],
"Tasks": [
{
"EndpointID": "18c19d799d117a8afa20fcf5bb51c8927a4921abe121913e0b080284da459080",
"EndpointIP": "192.168.9.196",
"Info": null,
"Name": "swarm-macvlan-test.2.xqlym8mbvpo9qw6g9b6bwbm5j"
},
{
"EndpointID": "ac6d449822bac91916ed2aa9ab6dd02001cd324ec902fc14358cdebad3f9ca5e",
"EndpointIP": "192.168.9.198",
"Info": null,
"Name": "swarm-macvlan-test.3.kopddbmdmavmmd1mbmo4s9i4v"
},
{
"EndpointID": "c399388cbc2ca94c5a64bb0c7fef6d398d58baf01c6dec3ede26b58f976c0eb7",
"EndpointIP": "192.168.9.197",
"Info": null,
"Name": "swarm-macvlan-test.1.cfjzh0hnnroguzire8xpskjrb"
}
],
"VIP": "<nil>"
}
}
- Verify the connectivity between the containers by running these commands on the swarm manager node
master $ sudo docker service ls
ID NAME MODE REPLICAS IMAGE PORTS
huj54859rbgr swarm-macvlan-test replicated 3/3 chrch/docker-pets:1.0
master $ sudo docker service ps huj54859rbgr
ID NAME IMAGE NODE DESIRED STATE CURRENT STATE ERROR PORTS
cfjzh0hnnrog swarm-macvlan-test.1 chrch/docker-pets:1.0 worker-1 Running Running 7 days ago
xqlym8mbvpo9 swarm-macvlan-test.2 chrch/docker-pets:1.0 worker-2 Running Running 7 days ago
kopddbmdmavm swarm-macvlan-test.3 chrch/docker-pets:1.0 master Running Running 7 days ago
master $ sudo docker exec -it swarm-macvlan-test.3.kopddbmdmavmmd1mbmo4s9i4v sh
/app # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
40: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 02:42:05:4d:d0:a1 brd ff:ff:ff:ff:ff:ff
inet 192.168.9.198/26 scope global eth0
valid_lft forever preferred_lft forever
/app #
/app # ping swarm-macvlan-test.1.cfjzh0hnnroguzire8xpskjrb
PING swarm-macvlan-test.1.cfjzh0hnnroguzire8xpskjrb (192.168.9.197): 56 data bytes
64 bytes from 192.168.9.197: seq=0 ttl=64 time=0.868 ms
64 bytes from 192.168.9.197: seq=1 ttl=64 time=0.728 ms
64 bytes from 192.168.9.197: seq=2 ttl=64 time=0.759 ms
64 bytes from 192.168.9.197: seq=3 ttl=64 time=0.783 ms
--- swarm-macvlan-test.1.cfjzh0hnnroguzire8xpskjrb ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.728/0.784/0.868 ms
/app #
/app # ping swarm-macvlan-test.2.xqlym8mbvpo9qw6g9b6bwbm5j
PING swarm-macvlan-test.2.xqlym8mbvpo9qw6g9b6bwbm5j (192.168.9.196): 56 data bytes
64 bytes from 192.168.9.196: seq=0 ttl=64 time=1.129 ms
64 bytes from 192.168.9.196: seq=1 ttl=64 time=0.427 ms
64 bytes from 192.168.9.196: seq=2 ttl=64 time=0.636 ms
64 bytes from 192.168.9.196: seq=3 ttl=64 time=0.744 ms
64 bytes from 192.168.9.196: seq=4 ttl=64 time=0.655 ms
--- swarm-macvlan-test.2.xqlym8mbvpo9qw6g9b6bwbm5j ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.427/0.718/1.129 ms
/app #
/app # curl swarm-macvlan-test.2.xqlym8mbvpo9qw6g9b6bwbm5j:5000
<html>
<head>
<link rel='stylesheet' type='text/css' href="../static/style.css">
<title>Docker PaaS</title>
</head> ...
Docker IPAM Plugin logs are logged in the docker daemon logs.
To check the logs find the plugin id
$ docker plugin inspect infoblox:latest -f '{{ .ID }}'
980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Search for this ID in the docker daemon logs (default is /var/log/syslog) to find the plugin logs.
$ grep 'plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3' /var/log/syslog
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="time=\"2017-06-08T10:38:40Z\" level=info msg=\"Loading IPAM Configuration from the file\" " plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="time=\"2017-06-08T10:38:40Z\" level=info msg=\"Found Configuration file /etc/infoblox/docker-infoblox.conf" plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="\" " plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="time=\"2017-06-08T10:38:40Z\" level=info msg=\"Loading IPAM Configuration from the environment variables\" " plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="time=\"2017-06-08T10:38:40Z\" level=info msg=\"Configuration successfully loaded" plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="\" " plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="time=\"2017-06-08T10:38:40Z\" level=info msg=\"Socket File: '/run/docker/plugins/infoblox.sock'\" " plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
Jun 8 16:08:40 ishant dockerd[23649]: time="2017-06-08T16:08:40+05:30" level=info msg="time=\"2017-06-08T10:38:40Z\" level=info msg=\"Docker id is 'DVZR:HNJZ:42OG:XTRO:YOHD:VDYA:EBKK:UDO7:ILEA:JF7R:KYGG:QCIO'" plugin=980b5a3befebc1a64d6d788b4c1e78676ed3e2632e78b9b38a370a9e71d73ee3
For dependencies and build instructions, refer to BUILD.md.