Integreatly Operator

A Kubernetes Operator based on the Operator SDK for installing and reconciling managed products.

An Integreatly Operator can be installed using three different flavours: managed, managed-api or multitenant-managed-api

To switch between the three you can use export the INSTALLATION_TYPE env or use it in conjunction with any of the make commands referenced in this README

Installed products

The operator installs the following products:

managed

• AMQ Online
• AMQ Streams
• Codeready
• Fuse
• Nexus
• RHSSO (both a cluster instance, and a user instance)
• 3scale
• Integreatly solution explorer

managed-api

• 3scale
• RHSSO (both a cluster instance, and a user instance)
• Marin3r

multitenant-managed-api

• 3scale
• RHSSO (cluster instance)
• Marin3r

Prerequisites

• operator-sdk version v1.12.0.
• go version 1.17+
• moq
• oc version v4.6+
• yq version v4+
• jq
• Access to an Openshift v4.6.0+ cluster
• A user with administrative privileges in the OpenShift cluster

After installation, the following commands must be run to avoid a known issue related to the Moq package:

make code/compile
go install github.com/matryer/moq

Using ocm for installation of RHMI

If you want to test your changes on a cluster, the easiest solution would be to spin up OSD 4 cluster using ocm. See here for an up to date guide on how to do this.

Local Development

Ensure that the cluster satisfies minimal requirements:

• RHMI (managed): 26 vCPU
• RHOAM (managed-api and multitenant-managed-api): 18 vCPU. More details can be found in the service definition under the "Resource Requirements" section

1. Clone the integreatly-operator

Only if you haven't already cloned. Otherwise, navigate to an existing copy.

mkdir -p $GOPATH/src/github.com/integr8ly
cd $GOPATH/src/github.com/integr8ly
git clone https://github.com/integr8ly/integreatly-operator
cd integreatly-operator

2. Prepare your cluster

If you are working against a fresh cluster it will need to be prepared using the following. Ensure you are logged into a cluster by oc whoami. Include the INSTALLATION_TYPE. See here about this and other optional configuration variables.

INSTALLATION_TYPE=<managed/managed-api> make cluster/prepare/local

3. Configuration (optional)

If you are running RHOAM against a cluster which is smaller than the requirements listed above, you should use the IN_PROW variable, otherwise the installation will not complete. If you have a cluster which meets the requirements, this step can be skipped. Please see the table below for other configuration options.

INSTALLATION_TYPE=managed-api IN_PROW=true USE_CLUSTER_STORAGE=<true/false> make deploy/integreatly-rhmi-cr.yml

Variable	Options	Type	Default	Details
INSTALLATION_TYPE	managed, managed-api or multitenant-managed-api	Required	managed	Manages installation type. managed stands for RHMI. managed-api for RHOAM. multitenant-managed-api for Multitenant RHOAM.
IN_PROW	true or false	Optional	false	If true, reduces the number of pods created. Use for small clusters
USE_CLUSTER_STORAGE	true or false	Optional	true	If true, installs application to the cloud provider. Otherwise installs to the OpenShift.

4. Run integreatly-operator

Include the INSTALLATION_TYPE if you haven't already exported it. The operator can now be run locally:

INSTALLATION_TYPE=<managed/managed-api/multitenant-managed-api> make code/run

If you want to run the operator from a specific image, you can specify the image and run make cluster/deploy

IMAGE_FORMAT=<image-registry-address> INSTALLATION_TYPE=managed-api  make cluster/deploy

Note: if the operator doesn't find an RHMI cr, it will create one (Name: rhmi/rhoam).

Variable	Options	Type	Default	Details
PRODUCT_DECLARATION	File path	Optional	./products/installation.yaml	Specifies how RHOAM install the product operators, either from a local manifest, an index, or an included bundle. Only applicable to RHOAM

5. Validate installation

Use following commands to validate that installation succeeded:

For RHMI (managed): oc get rhmi rhmi -n redhat-rhmi-operator -o json | jq .status.stage

For RHOAM (managed-api): oc get rhmi rhoam -n redhat-rhoam-operator -o json | jq .status.stage

For RHOAM Multitenant (multitenant-managed-api): oc get rhmi rhoam -n sandbox-rhoam-operator -o json | jq .status.stage

Once the installation completed the command wil result in following output:

"complete"

Deploying to a Cluster with OLM and the Bundle Format

In order to create a bundle and/or deploy RHMI or RHOAM with OLM follow refer to this document.

For more details refer to this readme file.

Identity Provider setup

Set up testing IDP for OSD cluster

You can use the scripts/setup-sso-idp.sh script to setup a "testing-idp" realm in a cluster SSO instance and add it as IDP of your OSD cluster. With this script you will get few regular users - test-user[01-10] and few users that will be added to dedicated-admins group - customer-admin[01-03].

Prerequisites:

• oc command available on your machine (the latest version can be downloaded here)
• ocm command available ( the newest CLI can be downloaded here and you install it with mv (your downloaded file) /usr/local/bin/ocm) (necessary only if using OSD cluster)
• OC session with cluster admin permissions in a target cluster
• OCM session (necessary only if using OSD cluster)
• openssl command available on your machine

Variable	Format	Type	Default	Details
PASSWORD	string	Optional	None	If empty, a random password is generated for the testing users.
DEDICATED_ADMIN_PASSWORD	string	Optional	None	If empty, a random password is generated for the testing dedicated admins.
REALM	string	Optional	testing-idp	Set the name of the realm in side cluster sso
REALM_DISPLAY_NAME	string	Optional	Testing IDP	Realm display name in side cluster sso
INSTALLATION_PREFIX	string	Optional	None	If empty, the value is gotten for the the cluster using oc get RHMIs --all-namespaces -o (pipe) jq -r .items[0].spec.namespacePrefix
ADMIN_USERNAME	string	Optional	customer-admin	Username prefix for dedicated admins
NUM_ADMIN	int	Optional	3	Number of dedicated admins to be set up
REGULAR_USERNAME	string	Optional	test-user	Username prefix for regular test users
NUM_REGULAR_USER	int	Optional	10	Number of regular user to be used.

Configuring Github OAuth

Note: Following steps are only valid for OCP4 environments and will not work on OSD due to the Oauth resource being periodically reset by Hive.

Follow docs on how to register a new Github Oauth application and add the necessary authorization callback URL for your cluster as outlined below:

https://oauth-openshift.apps.<cluster-name>.<cluster-domain>/oauth2callback/github

Once the Oauth application has been registered, navigate to the Openshift console and complete the following steps:

Note: These steps need to be performed by a cluster admin

• Select the Search option in the left-hand nav of the console and select Oauth from the "Resources" dropdown
• A single Oauth resource should exist named cluster, click into this resource
• Scroll to the bottom of the console and select the Github option from the add dropdown
• Next, add the Client ID and Client Secret of the registered Github Oauth application
• Ensure that the Github organization from where the Oauth application was created is specified in the Organization field
• Once happy that all necessary configurations have been added, click the Add button
• For the validation purposes, log into the Openshift console from another browser and check that the Github IDP is listed on the login screen

Set up dedicated admins

To setup your cluster to have dedicated admins run the ./scripts/setup-htpass-idp.sh script which creates htpasswd identity provider and creates users.

Tests

Unit tests

Running unit tests:

make test/unit

E2E tests

If you have RHOAM operator installed using cluster storage (useClusterStorage: true), all AWS tests are being skipped (because all AWS tests would fail). To override this, you can provide an env var BYPASS_STORAGE_TYPE_CHECK=true.

To run E2E tests against a clean OpenShift cluster using operator-sdk, build and push an image to your own quay repo, then run the command below changing the installation type based on which type you are testing:

make test/e2e INSTALLATION_TYPE=<managed/managed-api/multitenant-managed-api> OPERATOR_IMAGE=<your/repo/image:tag>

To run E2E tests against an existing RHMI cluster:

make test/functional

To run a single E2E test against a running cluster run the command below where E03 is the start of the test description:

INSTALLATION_TYPE=<managed/managed-api/multitenant-managed-api> TEST=E03 make test/e2e/single

Product tests

To run products tests against an existing RHMI cluster:

make test/products/local

Scorecard tests

For testing all scorecard tests within this repo, it is recommended to have RHOAM installed (or RHOAM install triggered) on an OSD/OCP cluster:

1. To deploy RHOAM operator on a cluster (using master branch image) and install RHOAM:

export INSTALLATION_TYPE=managed-api
make cluster/deploy

2. Prepare scorecard tests

make scorecard/bundle/prepare
make scorecard/service_account/prepare

3. Run scorecard test

# To run a specific test, set SCORECARD_TEST_NAME env var with a name
# of the test taken from '.labels.test' field in bundle/tests/scorecard/config.yaml
# Example:
make scorecard/test/run SCORECARD_TEST_NAME=basic-check-spec-test

Note

If you are doing some changes to the code of the scorecard test image (Dockerfile.scorecard, files in test/scorecard folder), you can test them by creating a new image in your quay.io account

export IMAGE=quay.io/<YOUR-ACCOUNT-ID>/scorecard-test-kuttl:<your-tag>
make scorecard/build/push IMAGE=$IMAGE

And update the image field in the test you want to run in bundle/tests/scorecard/config.yaml file to point to your image in quay.io

Uninstalling RHOAM

This section covers uninstallation of RHOAM if it was installed via locally, OLM or on ROSA

Local and OLM installation type

If you installed RHOAM locally or through a catalog source then you can uninstall one of two ways:

A) Create a configmap and add a deletion label (Prefered way of uninstallation).

oc create configmap managed-api-service -n redhat-rhoam-operator
oc label configmap managed-api-service api.openshift.com/addon-managed-api-service-delete=true -n redhat-rhoam-operator

B) Delete the RHOAM cr.

oc delete rhmi rhoam -n redhat-rhoam-operator

In both scenarios wait until the RHOAM cr is removed and then run the following command to delete the namespace.

oc delete namespace redhat-rhoam-operator

Note: After uninstalling RHOAM you should clean up the cluster by running the following command.

export INSTALLATION_TYPE=managed-api
make cluster/cleanup && make cluster/cleanup/crds

Addon

If you installed RHOAM as an addon then you can uninstall it through the ui as shown in the picture below , or alternatively you can run the following command.

ocm delete /api/clusters_mgmt/v1/clusters/${clusterId}/addons/managed-api-service

ROSA Addon

If you installed RHOAM as an addon on ROSA then you can uninstall it by running the following command.

rosa uninstall addon \
--cluster=${clusterName} managed-api-service -y

Release

See the release doc.