Teknic Motor Controller

Table of Contents

1. Teknic Motor Controller
   1. Requirements
   2. Setup
   3. Utiliztion
   4. Configuration Files Breakdown
   5. Teknic Documentation
   6. Helpful Links
2. Trash Bot Motor Controller
3. Teknic Examples
   1. Example GPIO
   2. Example Homing
   3. Example Motion
   4. Example MultiThreaded
   5. Example SingleThreaded
   6. Example StatusAlerts
   7. HelloWorld

Requirements

The following files are recommended for installation:

$ sudo apt install ros-melodic-teleop-twist-keyboard  

Setup

1. Create ROS Workspace.

$ mdir -p ~/Documents/ros_workspace/trash_bot_workspace/src  

2. Move to workspace.

$ cd ~/Documents/ros_workspace/trash_bot_workspace/src  

3. Clone this repository into newly created Trash Bot Workspace.

$ git clone [email protected]:jcook3701/teknic_motor_controller.git  

4. Move to the head of the project workspace and build the ROS Teknic Motor Controller.

$ cd .. && catkin_make  

Utilization

1. Source the environment file from the head of the project workspace.

$ source devel/setup.bash  

2. Use roslaunch to start the motor controller.

$ roslaunch teknic_motor_controller trash_bot_motor_controller.launch  

Configuration Files Breakdown

Note: The following assumptions are being made when using this motor controller.

1. Each motor is driving two wheels. Each wheel has its own chain that connects it to either the left or the right motor.
2. Motor orientation is the following:

  (L)  (R)  
---[]  []---  

3. There are exactly four wheels. This could be modified in the future with an additional parameter to the vehicle configuration file.

Vehicle Parameters:

1. Number of Motors
   • Description: Number of motors being used on vehicle. It is assumed that this number will be even with a minimum of two motors.
2. Gear Ratio
   • Description: Gear ratio between motor and single tire rotation.
3. Wheel Base:
   • Description: The length of the wheel base in meters.
4. Wheel Radius:
   • Description: The length of the wheel radius in meters.
5. Tire Deflection
   • Description: Deformation of tire at the point of contact
6. Diameter Mod
   • Description:

Teknic Motor Parameters:

1. Encoder Resolution
   • Description: Encoder tics per wheel revolution
2. Max Motor Velocity
   • Description: Max velocity that the motor may reach during operations.
3. Max Motor Acceleration
   • Description: Max acceleration that the motor may reach when ramping to the specified velocity.
4. Max Motor Torque Percentage
   • Description: Max percentage of available torque that the motor may use when operating.

Teknic Documentation

Clearpath SC User Manual
Description: This goes over the general setup and configuration of ClearPath Motors.

S-Foundation Reference
Description: This goes over the ClearPath SDK.

Helpful Links

Differential Drive Kinematics
Control of Mobile Robots- 2.2 Differential Drive Robots
Kinematics of a 4 wheeled differential drive robots
rosbot kernel headers