a Shield for pycom-modules with Weight, Temperature, audio and I2C sensor-connections and a powerpath manager ic
- Transistor-footprint is corrected now
- PIN 13/14 is not in use - this should prevent Pycom-Boards from blowing up if you insert them in the wrong orientation
- board format is smaller now so it fits into on of these boxes (2002-IP)
- battery voltage input is now controlled via Transistor for lower energy-consumption
- the new design was not built and verified yet - the easyhive project is focussing to the Easyhive-M0 board
- you can replace R5 with an 103AT Thermistor to prevent load into the battery at -0°C temperatures
- BOM for V1.1 is still not written. so you have to check things yourself and use the BOM from Version 1.0 and the schematic.
- Software is not updated yet to the new Hardware Design File. You're welcome to change that!
Software: GPL 3.0 and following versions
Hardware: CERN OHL 1.2 and following versions
This files are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.