DynamicNNBuilder

The DynamicNNbuilder is meant to easily compare different metrics for several different networks. By the use of factories, scaling up the project with more layer type is possible.

The user can provide a directory of folder, to compare in the generated report.

In this README there is a set up guide for how to set up a correct python environment. Furthermore there is a guide to show the usecase of the project.

Project Setup Guide

Setting Up a Python Virtual Environment

This guide will walk you through the process of setting up a virtual environment for this project using Python >= 3.9.12. During developement Python 3.9.12 was used.

Prerequisites

• Ensure you have >=Python 3.9.12 installed on your system.

Creating and Activating the Virtual Environment

1. Navigate to Your Project Directory:

   Open a terminal and change to your project's directory.

   cd path/to/your/project

2. Set up the venv

   python3.9 -m venv venv

3. Activate the environment

   venv\Scripts\activate

4. Install the requirementes

   pip install -r requirements.txt
   
   

How to use the DynamicNNBuilder

To run the default config file in main folder use:

python main.py

To define a specific toml or folder with toml files use:

python main.py -f path_to_file_or_folder.toml

To save at a specific location, use:

python main.py -l path_to_save_location

You can specify where the report should be saved with:

python main.py -rd report_save_path

!!! UNDER DEVELOPMENT !!!

To easily(well not yet) create and then run toml file, use:

python check.py

This uses the tkinter library to make the toml file you want to run.