agbplay

agbplay is a music player with Terminal interface for GBA ROMs that use the most common (mp2k/m4a) sound engine format. The code itself is written in C++.

Quick overview

Controls

• Arrow Keys or HJKL: Navigate through the program
• Tab: Change between playlist and songlist
• A: Add the selected song to the playlist
• D: Delete the selected song from the playlist
• T: Toggle whether the song should be output to a file (see R and E)
• G: Drag the song through the playlist for ordering
• I: Force song restart
• O: Song play/pause
• P: Force song stop
• +=: Double the playback speed
• -: Halve the playback speed
• Enter: Toggle track muting
• M: Mute selected track
• S: Solo selected track
• U: Unmute all tracks
• N: Rename the selected song in the playlisy
• E: Export selected songs to individual track files (to "$cwd/wav")
• R: Export selected songs to files (non-split)
• B: Benchmark, run the export program but don't write to file
• F: Save Playlist: The playlist is also saved when the program is closed
• Q or Ctrl-D: Exit rrogram
• !: Show extended song information

Current state of things

• ROMs can be loaded and scanned for the songtable automatically
• PCM playback works pretty much perfectly; GB instruments sound great, but envelope curves are not 100% accurate
• Basic rendering to file done, including dummy writing for benchmarking

To do

• Add missing key explanation for controls
• Change to an audio library that doesn't print ANYTHING messages on stdout

Dependencies

Debian	Arch	Cygwin
build-essential	base-devel	make, gcc-g++
libboost-all-dev	boost	libboost-devel
portaudio19-dev	portaudio	libportaudio-devel
libncursesw5-dev	ncurses5-compat-libs AUR	libncurses-devel
libsndfile1-dev	libsndfile	libsndfile-devel
libjsoncpp-dev	jsoncpp	libjsoncpp-devel

Configuration JSON

Since 21.10.2020, agbplay uses a standard JSON format for storing playlists and other configuration data.

Take a look at this sample scheme:

{
    "id" : "agbplay",
    "cgb-polyphony" : "mono-strict",
    "wave-output-dir" : "/home/misterx/Music/agbplay",
    "max-loops-export" : 1,
    "max-loops-playlist" : 1,
    "playlists" : 
    [
        {
            "games" : 
            [
                "BPED", "BPEE"
            ],
            "pcm-fixed-rate-resampling-algo" : "blep",
            "pcm-master-volume" : 12,
            "pcm-resampling-algo" : "linear",
            "pcm-reverb-buffer-len" : 1584,
            "pcm-reverb-level" : 0,
            "pcm-reverb-type" : "normal",
            "pcm-samplerate" : 4,
            "song-track-limit" : 10,
            "songs" : 
            [
                {
                    "index" : 414,
                    "name" : "Intro Video"
                },
                {
                    "index" : 442,
                    "name" : "The Pokemon"
                },
                {
                    "index" : 413,
                    "name" : "Title Screen"
                },
            ]
        },
        {
            "games" :
            [
                "AGSE"
            ],
            ...
        }
    ]
}

The root element in the JSON has the following properties:

• id is a fixed string and should always be set to agbplay.
• playlists contains the array of the actual tagged songs. See below for details.
• wave-output-dir specifies the directory which is used for exporting songs from agbplay.
• cgb-polyphony specifies whether CGB sounds should be allowed to be polyphonic. Valid values are mono-strict, mono-smooth, poly.
• max-loops-export specifies how many times songs should loop before fading out when exporting to a file.
• max-loops-playlist specifies how many times songs should loop before fading out when listening to a song within the program. This value can be set to -1 to make songs loop endlessly.

Each playlist entry in the array contains the following properties:

• games: A list of game codes which should use the specified playlist. agbplay doesn't generate this on its own, but you can manually edit the JSON to let games share a playlist (for example different localizations).
• pcm-master-volume: Value from 0 to 15. The correct setting for this value depends on the game and has to be reverse engineered individually.
• pcm-samplerate: Value from 0 to 15. The correct setting for this value depends on the game and has to be reverse engineered individually.
• pcm-reverb-level: I have not seen any games which use this. Can be used to apply reverb even for songs that don't use it. Set to 0 if you don't care.
• pcm-reverb-buffer-len: This is fixed to 1536 in Nintendo's engine, but if you want to experiement with reverb, you can change this.
• pcm-reverb-type: Different games use different reverb implementations. Check Sound formatting notes below for details.
• pcm-resampling-algo and pcm-fixed-rate-resampling-algo
• song-track-limit: Limit the number of tracks the engine can play. Useful for games which have an engine limit, but the song contain more tracks than the engine can handle.
• simulate-cgb-sustain-bug: Emulate the mp2k CGB sustain bug. Enabling this will delay the application of certain volume changes which may fix certain songs (e.g. Pokémon Emerald's Battle Arena). Though, keeping it disabled (default) may make certain songs sound more like the composer originally intended it.
• songs: This is again an array which contains all the playlist's songs. Format is pretty straight forward. There is an index property and a name property for each song.

Sound formatting notes

On Nintendo's engine (that runs on the hardware) it allows the developer to set a master volume for PCM sound from 0 to 15. This doesn't affect CGB sounds and changing it will result in a different volume ratio between PCM and CGB sounds.

As for the reverb level, you can globally set it from 0 to 127. This overrides the song's reverb settings in their song header.

The 'magic' samplerate values are listed below. Note that the 'magic' values correspond to the values like they are used by m4aSoundMode (values: 1-12). agbplay will use this 'magic' value to get the sample rate for so-called "fixed frequency sounds".

Magic values (in Hz): 5734, 7884, 10512, 13379, 15768, 18157, 21024, 26758, 31536, 36314, 40137, 42048

One more thing about reverb: Most games just use Nintendo's default reverb algorithm (or reverb of 0 for no reverb at all). However, some games have implemented their own algorithms. You can use the following values in combination with the option pcm-reverb-type to set it:

• normal = Nintendo's normal reverb algorithm
• gs1 = Camelot's reverb used in Golden Sun 1
• gs2 = Camelot's reverb used in Golden Sun TLA (aka Golden Sun 2)
• mgat = Camelot's reverb used in Mario Golf - Advance Tour
• test = Only use this if you use the TestReverb class for developing your own algrithm
• none = disabled (not used in normal games)

Last but not least, agbplay now supports different resampling algorithms which can be set in the JSON-File. There is a setting for normal PCM sounds pcm-resampling-algo and pcm-fixed-rate-resampling-algo for fixed frequency sounds (mostly used for drums). They sypport the following values:

• nearest = Fast! Commonly referred to as "no interpolation". Sounds pretty bad in most cases but can give you that low quality crunchyness. You most likely want to use blep over this one (nearest is wayyyyyyy cheaper to compute, though).
• linear = Fast! Interpolate samples in a triangular fasion. This is what's used with Nintendo's sound driver (although with different target samplerates). Recommended for normal sounds.
• sinc = Slow! Use a sinc based filter to avoid aliasing. For most games this will filter out a lot of the high end freuqnecies. The only case I'd recommend this is for games that generally use high samplerate waveforms (I like to use it on Golden Sun TLA which uses 31 kHz for drums).
• blep = Slow! This generates bandlimited rectangular pulses for the samples. It's similar to nearest but nearest will not bandlimit the rectangular pulses so it's going to cause frequency band folding. Use blep if you want to fake some brightness into your drums (i.e. fixed frequency sounds) since this is the way hardware does it (except blep will clean up the higher frequencies which nearest doesn't).
• blamp = Slow! Same as blep but creates bandlimited triangular pulses instead of rectangular ones. Use this as high quality alternative to linear.

Importing tags from GSF files

Manually creating playlists/tags for some games can be avoided if you can find an existing GSF set for that particular game.

Use the supplied playlist_from_gsf.py script and pass it a set of .minigsf files. The script will then parse the song names and song numbers from those files and will output a JSON formatted array that then can be used for the property songs, which is explained above. So you can copy that JSON array into your agbplay.json for that particular game.

Additional information

Debian portaudio issues

If you have issues installing portaudio19-dev on Debian (conflicting packages) make sure to install "libjack-jackd2-dev" before. The reason for this is that portaudio on Debian depends on either the old dev package for jack or the jack2 dev package. By default apt wants to install the old one which for some reason causes problems on a lot of systems.

"Missing DLLs"

If you happen to get errors about missing DLLs and you compiled agbplay under the Cygwin environement, you also have to run agbplay from the Cygwin environment. Cygwin compiled software does require the Cygwin runtime for 99% of the programs, so please accept that you have to do this for agbplay as well.

Terminal Colors

agbplay requires 256 color terminal support. If you happen to see the message Terminal does not support 256 colors, you may have to use a different terminal emulator or you have to fix your TERM variable.

If you are using the Cygwin environment, you can do the following:

• Right click on the titlebar of the Cygwin Terminal
• Click Options
• Select "Terminal" in the tree view
• Change Type to xterm-256color

Another option is to use the Windows Terminal from the Windows Store (although it sometimes still seems to have a few graphical issues).

Never ever set your TERM variable in your .bashrc or equivalent. This will cause issues if you are running your shell from the wrong terminal emulator. The TERM string required depends on the terminal emulator you use and thus should only be set by it.

Building

Install all dependencies (listed above) and run make.

Ideally the code should compile fine if all dependencies are installed.

It has been tested on Cygwin (Windows), Debian and Arch Linux, all on x86-64. Native Windows is currently NOT supported. I did some compilation tests with the MinGW 64 compiler (MSYS2). However, even when compiling the code, getting native 256 colors to work and getting all the unicode characters to display properly wasn't something I was able to achieve during a long day.

Contributing

If you have any suggestions feel free to open up a pull request or just an issue with some basic information. For issues I'm mostly focused on fixing bugs and not really on any new features.

Please be reminded that this was a "C++ learning project" for me and therefore the code is quite weird and probably contains a lot of "bad practices" in a few places.