Merge pull request #4430 from shellixyz/update_cli_docs

Update CLI documentation

docs/Cli.md

@@ -298,8 +298,13 @@ After restoring it's always a good idea to `dump` or `diff` the settings once ag
 |  osd_dist_alarm       | 1000  | Value above which to make the OSD distance from home indicator blink (meters) |
 |  osd_alt_alarm        | 100   | Value above which to make the OSD relative altitude indicator blink (meters) |
 |  osd_neg_alt_alarm    | 5    | Value bellow which (negative altitude) to make the OSD relative altitude indicator blink (meters) |
+|  osd_imu_temp_alarm_min | -200 | Temperature under which the IMU temperature OSD element will start blinking (decidegrees centigrade) |
+|  osd_imu_temp_alarm_max | 600 | Temperature above which the IMU temperature OSD element will start blinking (decidegrees centigrade) |
+|  osd_baro_temp_alarm_min | -200 | Temperature under which the baro temperature OSD element will start blinking (decidegrees centigrade) |
+|  osd_baro_temp_alarm_max | 600 | Temperature above which the baro temperature OSD element will start blinking (decidegrees centigrade) |
 |  osd_estimations_wind_compensation  | ON | Use wind estimation for remaining flight time/distance estimation |
 |  osd_failsafe_switch_layout  | OFF | If enabled the OSD automatically switches to the first layout during failsafe |
+|  osd_temp_label_align | LEFT | Allows to chose between left and right alignment for the OSD temperature sensor labels. Valid values are `LEFT` and `RIGHT` |
 |  display_force_sw_blink  | OFF | OFF = OSD hardware blink / ON = OSD software blink. If OSD warning text/values are invisible, try setting this to ON |
 |  magzero_x  | 0 | Magnetometer calibration X offset. If its 0 none offset has been applied and calibration is failed. |
 |  magzero_y  | 0 | Magnetometer calibration Y offset. If its 0 none offset has been applied and calibration is failed. |