chore: Update cargo deny to new format

deny.toml

@@ -9,6 +9,11 @@
 # The values provided in this template are the default values that will be used
 # when any section or field is not specified in your own configuration
 
+# Root options
+
+# The graph table configures how the dependency graph is constructed and thus
+# which crates the checks are performed against
+[graph]
 # If 1 or more target triples (and optionally, target_features) are specified,
 # only the specified targets will be checked when running `cargo deny check`.
 # This means, if a particular package is only ever used as a target specific
@@ -20,82 +25,78 @@
 targets = [
     # The triple can be any string, but only the target triples built in to
     # rustc (as of 1.40) can be checked against actual config expressions
-    #{ triple = "x86_64-unknown-linux-musl" },
+    #"x86_64-unknown-linux-musl",
     # You can also specify which target_features you promise are enabled for a
     # particular target. target_features are currently not validated against
     # the actual valid features supported by the target architecture.
     #{ triple = "wasm32-unknown-unknown", features = ["atomics"] },
 ]
+# When creating the dependency graph used as the source of truth when checks are
+# executed, this field can be used to prune crates from the graph, removing them
+# from the view of cargo-deny. This is an extremely heavy hammer, as if a crate
+# is pruned from the graph, all of its dependencies will also be pruned unless
+# they are connected to another crate in the graph that hasn't been pruned,
+# so it should be used with care. The identifiers are [Package ID Specifications]
+# (https://doc.rust-lang.org/cargo/reference/pkgid-spec.html)
+#exclude = []
+# If true, metadata will be collected with `--all-features`. Note that this can't
+# be toggled off if true, if you want to conditionally enable `--all-features` it
+# is recommended to pass `--all-features` on the cmd line instead
+all-features = false
+# If true, metadata will be collected with `--no-default-features`. The same
+# caveat with `all-features` applies
+no-default-features = false
+# If set, these feature will be enabled when collecting metadata. If `--features`
+# is specified on the cmd line they will take precedence over this option.
+#features = []
+
+# The output table provides options for how/if diagnostics are outputted
+[output]
+# When outputting inclusion graphs in diagnostics that include features, this
+# option can be used to specify the depth at which feature edges will be added.
+# This option is included since the graphs can be quite large and the addition
+# of features from the crate(s) to all of the graph roots can be far too verbose.
+# This option can be overridden via `--feature-depth` on the cmd line
+feature-depth = 1
 
 # This section is considered when running `cargo deny check advisories`
 # More documentation for the advisories section can be found here:
 # https://embarkstudios.github.io/cargo-deny/checks/advisories/cfg.html
 [advisories]
-# The path where the advisory database is cloned/fetched into
-db-path = "~/.cargo/advisory-db"
+# The path where the advisory databases are cloned/fetched into
+#db-path = "$CARGO_HOME/advisory-dbs"
 # The url(s) of the advisory databases to use
-db-urls = ["https://github.com/rustsec/advisory-db"]
-# The lint level for security vulnerabilities
-vulnerability = "deny"
-# The lint level for unmaintained crates
-unmaintained = "warn"
-# The lint level for crates that have been yanked from their source registry
-yanked = "warn"
-# The lint level for crates with security notices. Note that as of
-# 2019-12-17 there are no security notice advisories in
-# https://github.com/rustsec/advisory-db
-notice = "warn"
+#db-urls = ["https://github.com/rustsec/advisory-db"]
 # A list of advisory IDs to ignore. Note that ignored advisories will still
 # output a note when they are encountered.
-ignore = []
-# Threshold for security vulnerabilities, any vulnerability with a CVSS score
-# lower than the range specified will be ignored. Note that ignored advisories
-# will still output a note when they are encountered.
-# * None - CVSS Score 0.0
-# * Low - CVSS Score 0.1 - 3.9
-# * Medium - CVSS Score 4.0 - 6.9
-# * High - CVSS Score 7.0 - 8.9
-# * Critical - CVSS Score 9.0 - 10.0
-#severity-threshold =
+ignore = [
+    #"RUSTSEC-0000-0000",
+    #{ id = "RUSTSEC-0000-0000", reason = "you can specify a reason the advisory is ignored" },
+    #"[email protected]", # you can also ignore yanked crate versions if you wish
+    #{ crate = "[email protected]", reason = "you can specify why you are ignoring the yanked crate" },
+]
+# If this is true, then cargo deny will use the git executable to fetch advisory database.
+# If this is false, then it uses a built-in git library.
+# Setting this to true can be helpful if you have special authentication requirements that cargo-deny does not support.
+# See Git Authentication for more information about setting up git authentication.
+#git-fetch-with-cli = true
 
 # This section is considered when running `cargo deny check licenses`
 # More documentation for the licenses section can be found here:
 # https://embarkstudios.github.io/cargo-deny/checks/licenses/cfg.html
 [licenses]
-# The lint level for crates which do not have a detectable license
-unlicensed = "deny"
 # List of explicitly allowed licenses
 # See https://spdx.org/licenses/ for list of possible licenses
 # [possible values: any SPDX 3.11 short identifier (+ optional exception)].
 allow = [
     "MIT",
     "Apache-2.0",
     "ISC",
-    "BSD-2-Clause",
     "BSD-3-Clause",
     "OpenSSL",  # NOTE: For `ring`
     "Unicode-DFS-2016",
+    "BSL-1.0",
 ]
-# List of explicitly disallowed licenses
-# See https://spdx.org/licenses/ for list of possible licenses
-# [possible values: any SPDX 3.11 short identifier (+ optional exception)].
-deny = [
-    #"Nokia",
-]
-# Lint level for licenses considered copyleft
-copyleft = "deny"
-# Blanket approval or denial for OSI-approved or FSF Free/Libre licenses
-# * both - The license will be approved if it is both OSI-approved *AND* FSF
-# * either - The license will be approved if it is either OSI-approved *OR* FSF
-# * osi-only - The license will be approved if is OSI-approved *AND NOT* FSF
-# * fsf-only - The license will be approved if is FSF *AND NOT* OSI-approved
-# * neither - This predicate is ignored and the default lint level is used
-allow-osi-fsf-free = "neither"
-# Lint level used when no other predicates are matched
-# 1. License isn't in the allow or deny lists
-# 2. License isn't copyleft
-# 3. License isn't OSI/FSF, or allow-osi-fsf-free = "neither"
-default = "deny"
 # The confidence threshold for detecting a license from license text.
 # The higher the value, the more closely the license text must be to the
 # canonical license text of a valid SPDX license file.
@@ -104,20 +105,17 @@ confidence-threshold = 0.8
 # Allow 1 or more licenses on a per-crate basis, so that particular licenses
 # aren't accepted for every possible crate as with the normal allow list
 exceptions = [
-    # "The copyleft applies to any files containing MPLed code."
-    # Source: https://www.mozilla.org/en-US/MPL/2.0/FAQ/#copyleft-scope
-    # So using webpki-roots (Mozilla root certificates) should be ok.
-    { allow = ["MPL-2.0"], name = "webpki-roots", version = "*" },
+    # Each entry is the crate and version constraint, and its specific allow
+    # list
+    #{ allow = ["Zlib"], crate = "adler32" },
 ]
 
 # Some crates don't have (easily) machine readable licensing information,
 # adding a clarification entry for it allows you to manually specify the
 # licensing information
 [[licenses.clarify]]
-# The name of the crate the clarification applies to
-name = "ring"
-# The optional version constraint for the crate
-version = "*"
+# The package spec the clarification applies to
+crate = "ring"
 # The SPDX expression for the license requirements of the crate
 expression = "MIT AND ISC AND OpenSSL"
 # One or more files in the crate's source used as the "source of truth" for
@@ -135,7 +133,7 @@ license-files = [
 # published to private registries.
 # To see how to mark a crate as unpublished (to the official registry),
 # visit https://doc.rust-lang.org/cargo/reference/manifest.html#the-publish-field.
-ignore = true  # To allow the own crate
+ignore = false
 # One or more private registries that you might publish crates to, if a crate
 # is only published to private registries, and ignore is true, the crate will
 # not have its license(s) checked
@@ -157,25 +155,60 @@ wildcards = "allow"
 # * simplest-path - The path to the version with the fewest edges is highlighted
 # * all - Both lowest-version and simplest-path are used
 highlight = "all"
+# The default lint level for `default` features for crates that are members of
+# the workspace that is being checked. This can be overridden by allowing/denying
+# `default` on a crate-by-crate basis if desired.
+workspace-default-features = "allow"
+# The default lint level for `default` features for external crates that are not
+# members of the workspace. This can be overridden by allowing/denying `default`
+# on a crate-by-crate basis if desired.
+external-default-features = "allow"
 # List of crates that are allowed. Use with care!
 allow = [
-    #{ name = "ansi_term", version = "=0.11.0" },
+    #"[email protected]",
+    #{ crate = "[email protected]", reason = "you can specify a reason it is allowed" },
 ]
 # List of crates to deny
 deny = [
     # NOTE: We don't allow native-tls. We want rustls for security and portability.
     { name = "native-tls" },
 ]
+
+# List of features to allow/deny
+# Each entry the name of a crate and a version range. If version is
+# not specified, all versions will be matched.
+#[[bans.features]]
+#crate = "reqwest"
+# Features to not allow
+#deny = ["json"]
+# Features to allow
+#allow = [
+#    "rustls",
+#    "__rustls",
+#    "__tls",
+#    "hyper-rustls",
+#    "rustls",
+#    "rustls-pemfile",
+#    "rustls-tls-webpki-roots",
+#    "tokio-rustls",
+#    "webpki-roots",
+#]
+# If true, the allowed features must exactly match the enabled feature set. If
+# this is set there is no point setting `deny`
+#exact = true
+
 # Certain crates/versions that will be skipped when doing duplicate detection.
 skip = [
-    #{ name = "ansi_term", version = "=0.11.0" },
+    #"[email protected]",
+    #{ crate = "[email protected]", reason = "you can specify a reason why it can't be updated/removed" },
 ]
 # Similarly to `skip` allows you to skip certain crates during duplicate
 # detection. Unlike skip, it also includes the entire tree of transitive
 # dependencies starting at the specified crate, up to a certain depth, which is
-# by default infinite
+# by default infinite.
 skip-tree = [
-    #{ name = "ansi_term", version = "=0.11.0", depth = 20 },
+    #"[email protected]", # will be skipped along with _all_ of its direct and transitive dependencies
+    #{ crate = "[email protected]", depth = 20 },
 ]
 
 # This section is considered when running `cargo deny check sources`.
@@ -193,3 +226,11 @@ unknown-git = "warn"
 allow-registry = ["https://github.com/rust-lang/crates.io-index"]
 # List of URLs for allowed Git repositories
 allow-git = []
+
+[sources.allow-org]
+# 1 or more github.com organizations to allow git sources for
+github = []
+# 1 or more gitlab.com organizations to allow git sources for
+gitlab = []
+# 1 or more bitbucket.org organizations to allow git sources for
+bitbucket = []