Add Example for ESP8266 with Sensor Array

examples/Arduino_Nano_AM2302_Sensor_Array_Example/Arduino_Nano_AM2302_Sensor_Array_Example.ino

@@ -18,7 +18,7 @@ constexpr int PIN_1{4};
 constexpr int PIN_2{11};
 constexpr int PIN_3{12};
 
-// Create Sensor Object array with std:array
+// Create Sensor Object array
 AM2302::AM2302_Sensor sensor_arr[SIZE] = {
   AM2302::AM2302_Sensor{PIN_1},
   AM2302::AM2302_Sensor{PIN_2},
@@ -46,17 +46,10 @@ void setup() {
 
 void loop() {
   // put your main code here, to run repeatedly:
-
   Serial.print("\tSensor Status : ");
   for (size_t i = 0; i < SIZE; ++i) {
     Serial.print(sensor_arr[i].read());
     Serial.print("\t");
-    //Serial.print("\tTemperature: ");
-    //Serial.print(sensor_arr[i].get_Temperature());
-    //Serial.println(" °C");
-    //Serial.print("\tHumidity:    ");
-    //Serial.print(sensor_arr[i].get_Humidity());
-    //Serial.println(" %\n\n");
   }
   Serial.print("\n\tTemperature   : ");
   for (size_t i = 0; i < SIZE; ++i) {

examples/Wemos_D1_mini_AM2302_Sensor_Array_Example/Wemos_D1_mini_AM2302_Sensor_Array_Example.ino

@@ -0,0 +1,71 @@
+/*
+*	Wemos_D1_mini_Sensor_Array_Example.ino
+*
+*	Author: Frank Häfele
+*	Date:	23.04.2024
+*
+*	Objective:
+    Measure sensor data of AM2302-Sensor-Array with Arduino IDE.
+    Use 3 sensors and compare them with serial output 
+*/
+
+#include <Arduino.h>
+#include <AM2302-Sensor.h>
+#include <ESP8266WiFi.h>
+
+
+// Create Sensor Object array with std:array
+std::array<AM2302::AM2302_Sensor, 3> sensor_arr{
+  AM2302::AM2302_Sensor{4},
+  AM2302::AM2302_Sensor{5},
+  AM2302::AM2302_Sensor{0}
+};
+
+
+void setup() {
+  WiFi.mode(WIFI_OFF);
+  // put your setup code here, to run once:
+  Serial.begin(115200);
+  while(!Serial) {
+    yield();
+  }
+  Serial.print(">>> Test Sensor Array of AM2302 (DHT22) Sensors <<<\n\n");
+  delay(5000);
+
+  for (size_t i = 0; i < sensor_arr.size(); ++i) {
+    Serial.print("Sensor ");
+    Serial.print(i);
+    Serial.print(" available - ");
+    Serial.println(sensor_arr[i].begin());
+  }
+  Serial.print("\n");
+  delay(3000);
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+  Serial.print("\tSensor Status : ");
+  for (size_t i = 0; i < sensor_arr.size(); ++i) {
+    Serial.print(sensor_arr[i].read());
+    Serial.print("\t");
+    //Serial.print("\tTemperature: ");
+    //Serial.print(sensor_arr[i].get_Temperature());
+    //Serial.println(" °C");
+    //Serial.print("\tHumidity:    ");
+    //Serial.print(sensor_arr[i].get_Humidity());
+    //Serial.println(" %\n\n");
+  }
+  Serial.print("\n\tTemperature   : ");
+  for (size_t i = 0; i < sensor_arr.size(); ++i) {
+    Serial.print(sensor_arr[i].get_Temperature());
+    Serial.print("\t");
+  }
+  Serial.print("\n\tHumidity      : ");
+  for (size_t i = 0; i < sensor_arr.size(); ++i) {
+    Serial.print(sensor_arr[i].get_Humidity());
+    Serial.print("\t");
+  }
+  Serial.print("\n\n");
+  delay(10000);
+}