Manage wireguard server and user configs. Ensures server and user configs remain consistent.
Available on
On Arch install using the PKGBUILD provided in packaging directory or from the AUR.
simplifies wireguard administration. ( server and users )
guarantees server and user configs remain synchronized (public keys).
handles key creation when needed
users can have multiple profiles (bob:laptop bob:phone etc)
users and/or profiles can be marked active/inactive
'wg show' output connections displayed by user:profile name.
This solves a long standing annoyance in a simple way by showing names instead of public keys as output by wg show. Also provides check that server config is up to date and if it needs to be restarted with new wg0.conf
supports importing existing user/profiles
Use python 3 ipaddress in place of 3rd party netaddr module.
Code reorg
Split route - new option set allowed_ips in user configs. By default it has everything going via the VPN. Split routing is useful.
For example you may want to route via the VPN only those networks on the LAN (inside) of the vpn server while allowing all other packets to go directly out.
This is also useful when setting up wireguard to join 2+ locations where each location's subnet is available to users at either location.
This is done using "--allowed_ips" which sets the wireguard config "AllowedIPs". This option can be used when creating a new user:profile or when modifying an existing profile with -mod.
See :ref:`options-section` section for more detail.
Require python 3.11 or later
Adjust for upcoming python changes. Some argparse options have been deprecated in 3.12 and will be removed in 3.14
New Feature: Multiple IP Address for user profiles.
See new options --prefixlen_4 and --prefixlen_6.
I'd appreciate testing and feedback (see Issue #14)
New user profiles now get ip(s) from each server network. CIDR address for each network will have prefixlen_4 or IPv4 and prefixlen_6 for IPv6 networks. prefixlen are settable with new options.
Existing user profile (or -all) can have their IPs refreshed to pick up their new IPs from server config. If you already have multiple networks or simply added them to the server Address variable in configs/server/server.conf - and then refresh using:
wg-tool -mod -ips <user>:<profile>or
wg-tool -mod -ips -all- New option -upd, --upd_endpoint used with -mod to update existing user profiles when server IP/Port is changed.
- -mod now supports -all to apply to all users.
- wg-client companion package now available. A linux client tool and separate graphical program to launch wireguard client. Simplify using wg for all users.
- wg-peer-updn now saves additional copy of dns file as resolv.conf.wg Helpful for clients which sleep and on resume network restart overwrites resolv.conf This makes it simple to put back the vpn resolv.conf file by copying resolv.conf.wg to resolv.conf. Used by wg-client package. Postdown will still restore original resolv.conf.save as usual.
- Change python build from poetry to hatch
- Can now generate html and pdf docs using sphinx Pre-built wg_tool.pdf provided in repo See Howto-Build in the Docs directory
The Wireguard server report shows users by user:profile names instead of by public key fingerprint.
Can get human readable server report based on output of wg show. Can do this either by running on the wg server (-rrpt, *--run_show_rpt) or from saved report file (-rpt*, --show_rpt).
This report shows users and profiles in nice human readable form.
It also indicates whether each user and profile are marked active (by showing (+) or (-) beside the name. If an inactive user is connected, it may be time ensure the server is running the latest wg0.config.
This feature solves a long standing problem with native wireguard reports which burden the administrator with mapping IPs or public keys to a user profile. The report does it for you and shows actual user and profile names.
Because of this feature, this tool eliminates any need for schemes, such as Vanity keys, attempting to map public keys to something more palatable.
It will also advise if the current server config being used is out of sync with current tool config and therefore needs updating and/or restarting
Sample output of wg-tool -rrpt
wg server:
interface : wg0
port : nnnnn
pub_key : <x>
susan (+) : phone (+)
endpoint : xxx.xxx.xxx.xxx:yyyyy
address : xxx.xxx.xxx.xxx/32
handshake : 2 hours, 4 minutes, 15 seconds ago
transfer : 102.62 MiB received, 320.29 MiB sent
The tool manages wireguard server configs and the user configs.
It also guarantees that server and user configs are kept properly synchronized. This ensures that any information that is shared between the server and clients, such as public keys, are always consistent.
It handles key creation whenever needed, such as when adding user/profiles or when doing key rollovers.
A wireguard server and user configs share several common variables, such as public keys, hostname and listening ports, and therefore it's crucial they are consistent.
wg-tool uses a single source of data which is used to populate the actual configs wireguard needs; this approach guarantees they are always consistent with one another. It also simplifies managment significantly. Common tasks are handled by the tool in a convenient way. For example, It is very straightforward to add users or user profiles, roll keys or make users or profiles active or inactive.
In a nutshell to setup and use wireguard vpn one needs a server and each client gets a configuration, either in the form of a text based .conf file or a QR code. QR codes work nicely for wireguard phone app, for example, where the app uses on board camera to read the the QR code. For computer clients, the conf file is the simplest. The server and client keys share common information which must be kept synchronized. This includes shared public keys, pre-shared keys for added security along with network information (IPs, Ports and DNS).
wg-tool uses a file based configuration database kept under the config directory. This provides all the inputs the tool needs to generate the server and client configs. The latter are saved into the wg-config/server and wg-config/users directories for the server and clients respectively.
For convenience, previous configs are saved with .prev extension making it easy to compare with a prior version. It can be useful after making changes to diff the two configs.
The wg server config, wg-config/server/wg0.conf should be installed, as usual, in /etc/wireguard.
Each user can have 1 or more profiles. For example bob may have bob:phone and bob:laptop. The configs to share with each profile is saved into, in this example, wg-config/users/bob as bob-phone.conf, bob-phone-qr.png, bob-laptop.conf and bob-laptop-qr.png. These are provided to the user - bob in this case.
For wireguard clients running Linux, there are a couple of approches the client DNS. Client DNS should always be through the wireguard tunnel.
preferred approach:
- Activated by the --dns_linux option.
When using this option, wg-quick uses the provided wg-peer-updn script via PostUp/PostDown setting.
This scipt saves the current dns resolv.conf file when VPN is brought up using wg-quick up, installs the VPN dns into /etc/resolv.conf and then restores the prior resolv.conf when VPN is deactivated (wg-quick down).
alternative approach:
- DNS information in config is used by wg-quick. wg-quick, in turn, relies on resolvconf.
wg-tool uses 2 kinds of config files:
- configs : inputs to wg-tool
- wg-configs : outputs from wg-tool which are then used by wireguard server or clients.
For example, the wireguard server config file, wg0.conf, will be located in
wg-configs/server/wg0.conf
And the user QR codes and .conf files will be under
wg-configs/users/
Laying out this directory structure in a bit more detail.
wg-tool input configs
configs/
server/
server.conf
users/
user-1/
user-1.conf
user-2/
user-2.conf
...
wireguard configs will be saved to
wg-configs/
server/
wg0.conf
users/
user-1/
user-1-profile-1.conf
user-1-profile-1.png
user-1-profile-2.conf
user-1-profile-2.png
...
user-2/
user-2-profile-1.conf
user-2-profile-1.png
user-2-profile-2.conf
user-2-profile-2.png
Each of the files is actually a symlink to the real file which is kept under a db directory at the same level as the symlinks.
This allows us to keep history of every config as far back as we choose. There are options to choose the amount of history to keep for configs and separately for wg-configs. The default, in addition to current values, is to keep 5 additional configs and 3 wg-configs.
Whenever a config file is changed the previous version is made available as a symlink named xxx.prev. This allows for straightforward comparisons and makes it easy to revert if that were ever needed; though it is pretty unlikely to ever be the case.
Each user can have multiple profiles - each profile provides separate access to the vpn. As an example, user jane may have a phone profile and a laptop profile. Each profile will provide the wireguard .conf file along with an image file of its QR code. These 2 files provide the standard wireguard configs for users.
Aside from the QR image files, all text files are in standard TOML format.
There are 2 ways to get started; either create a new suite of users/profiles or import existing wireguard user.conf files. You can add users or new profiles for existing users at any time. This is very easy and explained below using the --add_user option. You can also import a user at any time, though it's primarily useful when first setting up wg-tool.
If you already have wireguard running then importing is the simplest and best way to proceed. If you're starting from scratch then wg-tool will create new users and profiles for you.
Either way it's pretty straightforward.
In either case the first step is to create a valid server config file. The best way to do that is to run:
wg-tool --init
or
wg-tool --work_dir=xxx --init
By default, when initializing, work_dir will be /etc/wireguard/wg-tool if it exists and with appropriate access permission (i.e. root), otherwise the current directory ./.
This creates a template in: configs/server/server.conf.
This file must be edited and changed to reflect your own network settings etc. These are all wireguard standard fields.
The key fields to edit are:
Address
This is the internal wg cidr mask on the server IP addresses (IPv4 and IPv6). N.B. If you prefer user:profile get IPv6 then put it first in the list.
Hostname and ListenPort
wg server hostname as seen from internet and port chosen
Hostname_Int ListenPort_Int
wg server hostname and port as seen on internal network. Useful for testing wg while inside the network. Client configs created with the -int option of wg-tool will use this internal server:port.
PrivateKey, PublicKey
If you have exsiting wg server, change these to your current keys. If not they are freshly generated by --init. and can be safely used.
PostUp PostDown
If you want to use the nftables provided by wg-tool - just copy postup.nft from the scripts directory. Change the 3 network variables at top for your setup.
DNS
List of dns servers to be used by wg - typical VPN setup uses internal network DNS
The nftables sample script, scripts/postup.nft, should be copied to /etc/wireguard/scripts.
Remember to edit the network variables at the top of the postup.nft script to match your network. One common case is to provide users with access to internet as well as to the internal network. The system border firewall must forward vpn traffic to the wireguard server which running on inside protected by the firewall.
The postup.nft script provides access to the internet and lan provided the wireguard server host has that access. If the wg server is in the DMZ then it probably only has access to DMZ net and internet.
Before deploying the postup.nft script, edit the 3 variables at the top for your own server setup:
vpn_net
this cidr block must match whats in the server config
lan_ip lan_iface
IP and interface of wireguard server
Remember to allow forwarding on the wireguard server, to ensure VPN traffic is permitted to go to the LAN:
sysctl -w net.ipv4.ip_forward=1
to keep this on reboot add to /etc/sysctl.d/sysctl.conf (or other filename):
net.ipv4.ip_forward = 1
The list of active users is managed in the server.conf file. This is generated and updated by wg-tool. The tool provides options to add and remove users from the active list. If a user is markewd inactive, none of their profiles will be in server wg0.conf. If a user is active then only their active profiles will be provided to wg0.conf
Each user config has its own list active profiles. It too is managed by the tool.
N.B. the active users and active profiles lists, only affect whether they are included in the server wg0.conf file. No user or profile is removed when a user and/or profile is marked inactive.
Now that the server config is ready, we can add users and their profiles.
Each user can have 1 or more profiles. Each user's data, including all their profile info, in kept in a single config file. It also tracks the list of active profiles.
If a profile is active, it will be put in wireguards wg0.conf server config, otherwise it won't.
Wireguard QR codes and .conf files are always created for every user/profile regardless of whether it is active or not.
Since each user has their own namespace, profile names can be same for different users.
Users and profiles can be created at any time. They can be created in bulk or one user at a time. For example this command:
wg-tool --add_user bob:phone,desk,ipad jane:phone,laptop
creates 2 users. bob gets 3 profiles : phone, desk and ipad while jane gets 2 profiles: phone and laptop.
If you don't provide a profile name, the default profile name is main.
At this point you should now have server config supporting these 5 user profiles and the corresponding wireguard QR codes and .conf files under wg-configs/users
You can get list of all users and their profiles
wg-tool --list_users
The (+) or (-) after a user or profile name indicates active or inactive.
Importing existing users and profiles
The tool can import 1 user:profile at a time. This is done using:
wg-tool --import_user <user.conf> user_name:profile_name
where <user.conf> is the standard wireguard conf file (the text version of the QR code). And the user_name and profile_name are what you want them to be known as now.
What worked for me was to copy all those existing wireguard user.conf files into ./old/ and then make a little shell script like the sample scripts/import_users. Script just imports each profile 1 at a time.
Then run the shell script. End result should be working wg0.conf functionally identical to what you currently have. In addition a new set of user-profile.conf and associated qr codes. All found in wg-configs/
As above you may want to see a list of users/profiles:
wg-tool --list_users
And compare a user profile conf or 2 with existing ones - QR codes will be different, but contain the same information. You can check this for bob's laptop QR by doing this:
zbarimg wg-configs/users/bob/bob-laptop-qr.png
which is available in the zbar package. It should match the corresponding user.conf file in wg-configs/users/bob/bob-laptop.conf
I recommend avoiding manually editing any config files, but if you do for some reason, then run wg-tool with no arguments. It will detect the changes and update wg-configs.
Pretty much everything you need to do should be available using wg-tool:
wg-tool --help
gives list of options.
Many options take user/profiles as additional input. users/profiles are to be given on command line
user or user:prof or user_1:prof_1,prof_2 user2 user_3:laptop,tablet
Summary of available options:
Positional arguments:
- users : user_1[:prof1,prof2,...] user_2[:prof_1,prof_2]
Options:
(-h, --help)
Show this help message and exit
(-i, --init)
Initialize and creat server config template. Please edit to match your server settings.
(wkd, --work_dir <dirname>)
Set working directory. This is is the directory holding all configs.
By default:
- when used with --init, work_dir will be /etc/wireguard/wg-tool if the directory exists and with appropriate access permission (i.e. root), otherwise the current directory ./.
- if not initializing, then, with access permission, /etc/wireguard/wg-tool/ will be the work_dir if there is a config dir in it, otherwise it is set to current dir ./.
(-add, --add_users)
Add user(s) and/or user profiles user:prof1,prof2,...
(-aips, --allowed_ips)
Set the cidr blocks which will be routed through the vpn. The default is all ips given by:
0.0.0.0/0,::/0
Provide a comma separated list of CIDRs or the string default to use the default value where all ips are routed through wireguard.
The current setting can be viewed by detailed user listing:
wg-tool -l -det [user:prof]
(-mod, --mod_users)
Modify existing user:profile(s). Use with -dnsrch, -dnslin, -aips and upd Can apply to all users/profiles via the -all option.
(-pfxlen_4, --prefixlen_4)
User profiles now get IP Addresses(es) from each server network. Each address is a block with cidr prefixlen_4. Defaults to 32 which means 1 IP address. e.g. if set to 30 then would get a block of 4 x.x.x.x/30
(-pfxlen_5, --prefixlen_5)
Similar to --prefixlen_4 but for ipv6. Default is 128
(upd, --upd_endpoint)
Use with -mod Ensure user/profile is using current server endpoint. Add -int if want to use internal hostname/port.
For example if the server IP changes, then you can update existing user/profiles with
wg-tool -mod -upd -all
(-dnsrch, --dns_search)
Use with -mod
Adds the list DNS_SEARCH from server config to client DNS search list. DNS_SEARCH in server.conf should contain a list of dns domains for dns search and Use together with -add for new user:profile or with -mod with existing profile.
(-dnslin, --dns_linux)
Use with -mod
For a Linux client, provide support for managing the dns resolv.conf file. What this does is save existing one, install the wireguard dns version and then restore original on exit. Use together with -add for new user:profile or with -mod with existing profile.
To bring up wireguard as a linux client one uses
wg-quick up <user-prof.conf> wg-quick down <user-prof.conf>
This will then use the wireguard DNS while running and restore previous dns on exit.
To add dns search and use dns_linux on existing user profile. First update the server config by editing configs/server/server.conf and add list of seach domains
DNS_SEARCH = ['sales.example.com', 'example.com']
then
wg-tool -mod -dnsrch -dns_linux bob:laptop
By default wg-quick uses resolvconf to manage dns resolv.conf. If you prefer, or dont use resolvconf then use this option. But only with Linux - it will not work for other clients (Android, iOS, etc)
With this option the usual DNS rows in in the conf file are replaced with PostUp and PostDown. PostUp saves existing resolv.conf, and installs the one needed by wireguard. PostDown restores the original saved resolv.conf.
To use this the script wg-peer-updn, available in the scripts directory must be in /etc/wireguard/scripts for the client.
The installer for the wg_tool package installs the script - but clients without this package should be provided both the user-profile.conf as well as the supporting script wg-peer-updn.
(-int, --int_serv)
With --add_users uses internal wireguard server
(-uuk, --upd_user_keys)
Generate new set of keys for existing user(s). This is public and private key pair along with new pre-shared key.
(-usk, --upd_serv_keys)
Generate new pair of server keys. NB This affects all users as they all use the server public key.
(-all, --all_users)
Some opts (e.g. upd_user_keys) may apply to all users/profiles when this is turned on.
(-act, --active)
Mark one or more users or user[:profile, profile...] active
(-inact, --inactive)
Mark one or more users or user[:profile, profile...] inactive
(-imp, --import_user <file>)
Import a standard wg user conf file into the spcified user_name:profile_name This is for one single user:profile
(-keep, --keep_hist <num>)
How much config history to keep (default 5)
(-keep_wg, --keep_hist_wg <num>)
How much wg-config history to keep (default 3)
(-sop, --save_opts)
Together with --keep_hist and/or --keep_hist_wg to save these values as new defaults.
(-fp, --file_perms)
Ensure all files have appropriately restricted permissions
(-rrpt, --run_show_rpt)
Run "wg show" and generate report of users, profiles. Also checks for consistency with current settings.
(-rpt, --show_rpt <file>)
Same as -rrpt only reads file containing the output of wg show If file is name stdin, then it reads from stdin.
(-l, --list_users)
Summary of users/profiles - sorted by user.
(-det, --details)
Adds more detail to -l and -rrpt. For -l report will also include details about each profile. For -rrpt report will show all user:profiles known to running server, not just those for which it has a recent connection.
(-v, --verb)
Adds more verbose output.
(-V, --version)
Display current version
I came across one hotel wifi, that while the vpn worked fine to provide internet access, I found that for my laptop to be able to also 'ssh internal-host' it would hang:
ssh -v <host>
hangs right after this is logged:
expecting SSH2_MSG_KEX_ECDH_REPLY
The fix was to set the MTU from 1500 down to 1400 on my laptop while at that hotel. The internet access continued to work fine, but this fixed whatever was a problem for ssh; so now 'ssh internal-host' worked as usual.
I have only had to change MTU setting at one location, but I mention it here in case anyone else comes across this.
wg-tool makes key rollover particularly simple - at least as far as updating keys and regenerating user and/or server configs with the new keys.
Distribution of the updated config/QR code to each user is not addressed by the tool. Continue to use existing methods - encyrpted email, in person display of QR code etc. ...
Its equally simple to update keys on a per user basis as well - just specify them on command line.
To roll the server keys run:
wg-tool --upd_serv_keysThis will also update all user profiles with the server's new public key.
To roll all user keys run:
wg-tool --upd_user_keysor as usual you can specify which profiles to generate the new keys for.
wg-tool --upd_user_keys [user:prof1,prof2 user2 ..]As usual, a change to any user profiles will generate new server wg0.conf file reflecting whaterver change was made.
Config changes are tracked by modification times.
For existing user/profiles without a saved value of mod_time, the last change date-time of the config file is used and saved. These mod times are displayed when using -l and -l -det options.
Stronger file access permissions to protect private data in configs.
Changes to work_dir.
Backward compatible with previous version. Now prefers to use /etc/wireguard/wg-tool if possible, otherwise falls back to current directory.
See Options or for more detail.
(-dnsrch, --dns_search)
Adds the list DNS_SEARCH from server config to client DNS search list. DNS_SEARCH in server.conf should contain a list of dns domains for dns search. Use together with -add for new user:profile or with -mod with existing profile.
(-dnslin, --dns_linux)
For a Linux client, provide support for managing the dns resolv.conf file. What this does is save existing one, install the wireguard dns version and then restore original on exit. Use together with -add for new user:profile or with -mod with existing profile.
While it is simplest to install from a package manager, manual installs are done as folllow:
First clone the repo :
git clone https://github.com/gene-git/wg_toolThen install to local directory. When running as non-root then set root_dest to a user writable directory.
rm -f dist/*
/usr/bin/python -m build --wheel --no-isolation
root_dest="/"
./scripts/do-install $root_destRun Time :
- python (3.9 or later)
- wireguard-tools
- nftables (for wireguard server postup.nft)
- netaddr (aka python-netaddr )
- python-qrcode
- tomli_w (aka python-tomli_w )
- If python < 3.11 : tomli (aka python-tomli)
Building Package:
- git
- hatch (aka python-hatch)
- wheel (aka python-wheel)
- build (aka python-build)
- installer (aka python-installer)
- rsync
We follow the live at head commit philosophy. This means we recommend using the latest commit on git master branch.
This approach is also taken by Google [1] [2].
Created by Gene C. and licensed under the terms of the MIT license.
- SPDX-License-Identifier: MIT
- SPDX-FileCopyrightText: © 2022-present Gene C <[email protected]>
| [1] | https://github.com/google/googletest |
| [2] | https://abseil.io/about/philosophy#upgrade-support |
