Improved WS2812B support, fixed library import from 2 different trees, added demo to control neopixels with on/off and brightness control from tux touch pads

configuration/install.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+# allow for quick repeated push of files after you modify them.
+../examples/install.sh "$@"

configuration/led.py

@@ -3,13 +3,15 @@
 settings = {    # LED panel or string
   "apa106":       False,  # IoTuz and LoliBot use APA106 RGB LEDs
 # "dimension":    (1,),
-  "dimension":    (8,),   # Edge lit acrylic panel
+#  "dimension":    (8,),   # Edge lit acrylic panel
+  "dimension":    (46,),
 # "dimension":    (8, 8),
 # "dimension":    (32, 8),
 # "dimension":    (32, 32),
 # "neopixel_pin":  4,     # TinyPICO
-  "neopixel_pin": 13,     # Usually
+  "neopixel_pin": 19,     # swagbadge SAO_1 bottom right viewed from front
 # "neopixel_pin": 15,     # Wemos OLED
 # "neopixel_pin": 23,     # IoTuz
-  "zigzag":       False   # For 2D panels
+  "zigzag":       False,  # For 2D panels
+  "dim":          0.2,    # default dim to save batteries/power over USB
 }

examples/badge_np.py

@@ -0,0 +1,168 @@
+
+from aiko import led,oled
+from machine import Pin, TouchPad
+import aiko.event
+import time
+from threading import Thread
+
+# from examples.badge_np import run; run()
+
+# this is set by aiko/led.py and configured in configuration/led.py
+#num_np = 46
+#np = neopixel.NeoPixel(Pin(19), 46)
+
+# Neopixel demo code (c) Adafruit, adapted to Aiko by Marc MERLIN
+# https://learn.adafruit.com/circuitpython-essentials/circuitpython-neopixel
+def wheel(pos):
+    # Input a value 0 to 255 to get a color value.
+    # The colours are a transition r - g - b - back to r.
+    if pos < 0 or pos > 255:
+        r = g = b = 0
+    elif pos < 85:
+        r = int(pos * 3)
+        g = int(255 - pos * 3)
+        b = 0
+    elif pos < 170:
+        pos -= 85
+        r = int(255 - pos * 3)
+        g = 0
+        b = int(pos * 3)
+    else:
+        pos -= 170
+        r = 0
+        g = int(pos * 3)
+        b = int(255 - pos * 3)
+    return (r, g, b)
+
+
+def rainbow_cycle(wait, loopcnt):
+    for j in range(loopcnt):
+        for i in range(num_np):
+            pixel_index = (i * 256 // num_np) + j
+
+            led.pixel(wheel(pixel_index & 255), i)
+        led.write()
+        time.sleep(wait)
+
+def color_chase(color, wait):
+    for i in range(num_np):
+        led.pixel(color, i, True)
+        time.sleep(wait)
+
+BLACK = (0, 0, 0)
+RED = (255, 0, 0)
+YELLOW = (255, 150, 0)
+GREEN = (0, 255, 0)
+CYAN = (0, 255, 255)
+BLUE = (0, 0, 255)
+PURPLE = (180, 0, 255)
+num_np = 0
+
+badge_np_init = False
+
+# left tux has a red LED with 50Ohm resistor between
+# GPIO 19 (used for WS2812). This shows the control commands
+# by blinking the red led.
+# left tux also has one green LED plugged into GPIO22 and GND
+leftTuxLedPin=Pin(22, Pin.OUT)
+
+# right tux has 2 low power green eye LEDs plugged into SDA
+# green is important as red/yellow is too low voltage and
+# would take too many amps, as well as damage the I2C signal
+# right tux has a front and back copper plane that can be
+# used as a touchpad. Front is GPIO33 and rear is GPIO32
+
+# On my board, with my soldering and my fingers, I see this:
+# 1) when I'm not touching anything pads, read about 135
+# 2) after being touched, they rebound to 5xx and quickly go
+#    back down to 135
+# 3) touching the front nose gives about 50-80 depending on pressure
+# 4) touching the front foot gives 20-50 depending on pressure and my finger
+# 5) touching the back foot gives around 20-50 on tux_rear
+tux_front = TouchPad(Pin(33))
+tux_rear  = TouchPad(Pin(32))
+
+
+left_tux_led_state = True
+def toggle_left_tux_led():
+    global left_tux_led_state
+    if tux_front.read() < 100 or tux_rear.read() < 100:
+        left_tux_led_state = True
+    else:
+        left_tux_led_state = not left_tux_led_state
+    leftTuxLedPin.value(left_tux_led_state)
+
+last_title=""
+title=""
+np_on = True
+def right_tux_touch():
+    global title, last_title, np_on
+    title=""
+    front_touch = tux_front.read() < 100
+    rear_touch  = tux_rear.read() < 100
+    if front_touch and rear_touch:
+        title = "Front+Rear"
+        if np_on:
+            print("Both Front and rear tux touched, toggle LEDs off")
+            led.set_dim(0)
+            np_on = False
+        else:
+            print("Both Front and rear tux touched, toggle LEDs on")
+            led.reset_dim()
+            np_on = True
+    elif front_touch:
+        print("Front tux touched, brighten")
+        title = "Front Touch"
+        led.change_dim(0.1)
+    elif rear_touch:
+        print("Rear tux touched, darken")
+        title = "Rear Touch"
+        led.change_dim(-0.1)
+    if title != last_title:
+        last_title = title
+        print("Changing title to", title)
+        oled.set_title(title)
+        oled.oleds_show()
+        # Debug to make sure we get the correct dim value from MQTT
+        #print("tux_touch:"); led.print_dim()
+        #led.set_dim(0.4)
+
+
+# Set configuration/main.py "application":     "examples/badge_np"
+def initialise():
+    global badge_np_init
+    print("Init badge_np")
+    # Does not work
+    oled.set_title("Init BadgeNP")
+    oled.oleds_show()
+    led.initialise()
+    aiko.event.add_timer_handler(toggle_left_tux_led, 300, immediate=False)
+    aiko.event.add_timer_handler(right_tux_touch, 500, immediate=False)
+    badge_np_init = True
+    # https://pymotw.com/2/threading/
+    # https://realpython.com/intro-to-python-threading/
+    # run never returns, so run it in its own thread
+    Thread(target=run, args=(True, )).start()
+
+def run(thread=False):
+    if thread: 
+        print("Start badge_np thread")
+        oled.set_title("")
+    if not badge_np_init: initialise()
+
+    global num_np
+    num_np = led.length
+
+    while True:
+        # Debug to make sure we get the correct dim value from MQTT
+        #print("loop1:"); led.print_dim()
+        color_chase(BLACK, 0.01)
+        color_chase(RED, 0.01)
+        color_chase(YELLOW, 0.01)
+        color_chase(GREEN, 0.01)
+        color_chase(CYAN, 0.01)
+        color_chase(BLUE, 0.01)
+        color_chase(PURPLE, 0.01)
+
+        rainbow_cycle(0.005, 200)  # rainbow cycle with 1ms delay per step
+

lib/aiko/led.py

@@ -2,9 +2,9 @@
 #
 # Usage
 # ~~~~~
-# import aiko.led
-# aiko.led.initialise()
-# aiko.led.pixel(aiko.led.red, 0, True)
+# from aiko import led
+# led.initialise()
+# led.pixel(aiko.led.red, 0, True)
 #
 # MQTT commands
 # ~~~~~~~~~~~~~
@@ -34,9 +34,11 @@
 from neopixel import NeoPixel
 
 import configuration.led
+import configuration.main
 
 import urandom
 apa106   = False
+# this is overrriden by value read from settings at init time
 dim      = 0.1  # 100% = 1.0
 full     = 255
 length   = None
@@ -62,7 +64,6 @@
 yellow = colors["yellow"]
 
 def apply_dim(color, dimmer=None):
-  global dim
   if dimmer == None: dimmer = dim
   red   = int(color[0] * dimmer)
   green = int(color[1] * dimmer)
@@ -71,8 +72,35 @@ def apply_dim(color, dimmer=None):
 # TODO: Now fails when called by exec(), see lib/aiko/mqtt.py
 # return tuple([int(element * dimmer) for element in color])
 
-def fill(color):
+# Allow setting dim from code or MQTT
+def set_dim(dimmer):
+    global dim
+    dim = dimmer
+
+# this is used to turn the neopixels back on to default brightness
+def reset_dim():
+  parameter = configuration.main.parameter
+  set_dim(parameter("dim", configuration.led.settings))
+
+# Take from -0.9 to 0.9 (+-0.1 is more typical) and adjust diming
+# value. Make sure it stays within 0 to 1
+def change_dim(change):
+    global dim
+    dim += change
+    if dim<0: dim=0
+    if dim>1: dim=1
+
+def print_dim():
+    print("Dim: ", dim)
+
+def fill(color, write=True):
   np.fill(apply_dim((color[0], color[1], color[2])))
+  if write: np.write()
+
+# write is needed if you use fill() or lots of pixel writes
+# and then you decide to push the result.
+def write():
+  np.write()
 
 # Bresenham's line algorithm
 def line(color, x0, y0, x1, y1):
@@ -143,6 +171,7 @@ def initialise(settings=configuration.led.settings):
   parameter = configuration.main.parameter
   apa106 = parameter("apa106", settings)
   zigzag = parameter("zigzag", settings)
+  reset_dim()
 
   length = linear(settings["dimension"])
   length_x = settings["dimension"][0]
@@ -158,11 +187,15 @@ def on_led_message(topic, payload_in):
     return True
 
   if payload_in.startswith("(led:dim "):
-    global dim
     tokens = [float(token) for token in payload_in[9:-1].split()]
-    dim = tokens[0]
+    set_dim(tokens[0])
     return True
 
+  # When I send one debug message, this gets printed twice. Why?
+  if payload_in == "(led:debug)":
+    print_dim()
+    print("length: ", length)
+
   if payload_in.startswith("(led:fill "):
     tokens = [int(token) for token in payload_in[10:-1].split()]
     color = (tokens[0], tokens[1], tokens[2])

lib/aiko/oled.py

@@ -2,14 +2,14 @@
 #
 # Usage
 # ~~~~~
-# import aiko.oled
-# aiko.oled.initialise()
+# from aiko import oled
+# oled.initialise()
 # oled.set_title("Title")
 # oled.write_title()
 # oled.log("Log message"))
 #
-# image = aiko.oled.load_image("examples/tux_nice.pbm")
-# oled0 = aiko.oled.oleds[0]
+# image = oled.load_image("examples/tux_nice.pbm")
+# oled0 = oled.oleds[0]
 # oled0.fill(0)
 # oled0.blit(image, 32, 0)
 # oled0.show()