update config with working pmod and arduino mask/dir/reading values.

logi-test/sw/common/config.h

@@ -1,9 +1,5 @@
-
-
 /*
-
-
-PMOD Diagram
+PMOD Diagram - testing sequence
 
 vcc gnd 3 2 1 0
 vcc gnd 7 6 5 4
@@ -17,22 +13,16 @@ test jiig for PMOD test shorts upper row pins with lower row pins one by one :
 
 First test :
  - set 0, 2 and 5, 7 as output others as inputs
- - writes '1' on 0, and 5, espect to read '1' on 1 and 4 
- - writes '1' on 2, and 7, espect to read '1' on 6 and 3
+ - writes '1' on 0, and 5, expect to read '1' on 1 and 4 
+ - writes '1' on 2, and 7, expect to read '1' on 6 and 3
 
 Second test :
  - set 1, 3 and 4, 6 as output others as inputs
- - writes '1' on 1, and 4, espect to read '1' on 0 and 5 
- - writes '1' on 3, and 6, espect to read '1' on 2 and 7
-
+ - writes '1' on 1, and 4, expect to read '1' on 0 and 5 
+ - writes '1' on 3, and 6, expect to read '1' on 2 and 7
 */
 
 
-
-
-
-
-
 //DEFINE WHICH TESTS TO RUN
 //COMMENT OUT TESTS YOU DO NOT WANT TO RUN
 #define TEST_SDRAM 		//test the SDRAM
@@ -49,7 +39,6 @@ Second test :
 #define TEST_ARD	//testing arduino connector pins
 #define TEST_OPEN	//removing test jigs test (open)
 
-
 #define LED_MASK 0x0003
 #define PB_MASK 0x0003
 #define SW_MASK 0x000C
@@ -59,8 +48,6 @@ Second test :
 #define SATA_WRITE_SHIFT 2
 #define SATA_READ_SHIFT 6
 
-
-
 #ifdef LOGIPI
 
 #define LOAD_CMD "/usr/bin/logi_loader logipi_test.bit"
@@ -88,7 +75,6 @@ Second test :
 #define GPIO_TEST2_2 0x4848
 #define GPIO_TEST2_2_EXPECTED 0x8484
 
-
 #define ARD_MASK 0x003F
 #define ARD_TEST1_DIR 0x0015	
 #define ARD_TEST1_1 0x0011
@@ -106,39 +92,50 @@ Second test :
 
 #endif
 
-#endif
 
 
 #ifdef LOGIBONE
 
+//word aligned addressing
 #define LOAD_CMD "/usr/bin/logi_loader ./logibone_test.bit"
-#define GPIO0 0x0004 
-#define GPIO0DIR 0x0006
-#define GPIO1 0x0008
-#define GPIO1DIR 0x000A
-#define GPIO2 0x000C
-#define GPIO2DIR 0x000E
-#define REG0  0x0020
-#define REG1  0x0022
-#define REG2  0x0024
-#define REG_DEBUG_RAM 0x0026
-#define MEM0  0x2000
+#define GPIO0 0x0002 
+#define GPIO0DIR 0x0003
+#define GPIO1 0x0004
+#define GPIO1DIR 0x0005
+#define GPIO2 0x0006
+#define GPIO2DIR 0x0007
+#define REG0  0x0010
+#define REG1  0x0011
+#define REG2  0x0012
+#define REG_DEBUG_RAM 0x0013
+#define MEM0  0x1000
 
+#define GPIO_TEST1_DIR 0xA5A5	
+#define GPIO_TEST1_1 0x2121
+#define GPIO_TEST1_1_EXPECTED 0x1212
+#define GPIO_TEST1_2 0x8484
+#define GPIO_TEST1_2_EXPECTED 0x4848
 
-//1-2-3-1-2-3
+#define GPIO_TEST2_DIR 0x5A5A
+#define GPIO_TEST2_1 0x1212
+#define GPIO_TEST2_1_EXPECTED 0x2121
+#define GPIO_TEST2_2 0x4848
+#define GPIO_TEST2_2_EXPECTED 0x8484
 
+//1-2-3-1-2-3
 #define ARD_MASK 0x003F
-#define ARD_TEST1_DIR 0x0015	
+#define ARD_TEST1_DIR 0x0015    
 #define ARD_TEST1_1 0x0011
-#define ARD_TEST1_1_EXPECTED 0x000A
+#define ARD_TEST1_1_EXPECTED 0x0022
 #define ARD_TEST1_2 0x0004
-#define ARD_TEST1_2_EXPECTED 0x0020
+#define ARD_TEST1_2_EXPECTED 0x0008
 
-#define ARD_TEST2_DIR 0x002A	
+
+#define ARD_TEST2_DIR 0x002A    
 #define ARD_TEST2_1 0x0022
-#define ARD_TEST2_1_EXPECTED 0x0014
+#define ARD_TEST2_1_EXPECTED 0x0011
 #define ARD_TEST2_2 0x0008
-#define ARD_TEST2_2_EXPECTED 0x0001
+#define ARD_TEST2_2_EXPECTED 0x0004
 
 #define LOG_PATH "/home/ubuntu/tests_log/%ld_test.log"