ioBroker.fritzdect

Tests:

Fritzbox DECT adapter for ioBroker

Setup

IP-address and password of Fritzbox should be defined via admin page, before the first start of the instance. The IP-address must be written with leading 'http://'

The devices are detected automatically during startup of fritzdect instance. If devices are added to the fritzbox during a running adapter instance, then please restart the adapter for object creation.

Several permissions have to be set in the fritzbox in order to interact with the adapter!

A german explanatory doc is available here: install_de

The widget requires that also vis-metro and vis-jqui-mfd are installed

Common Issues / Frequently Asked Questions

Fritzbox returned '00000000' no login possible. possible reasons:

The fritzbox allows only a limited number of logins in a timeframe. There are no appropriate user rights set in the fritzbox. There is a time elapsing in the fritzbox blocking the logins. A german doc is available here: troubleshooting
using https would result in:
```
  { error: { [Error: self signed certificate] code: 'DEPTH_ZERO_SELF_SIGNED_CERT' }
```
to overcome this, the option "rejectUnauthorized: false" is used in the https.request.

Thermostat

Fritzbox AHA API

The API of fritzbox has the following access:

sethkrtsoll
- 8-28°C for automatic control
- greater 28°C (254=ON)
- greater 28°C (253=OFF)

These settings are covered by the hkrmode and the 3 buttons. The activation lasts as long there is no other command or programmed sequence.

Additionally there is the access to:

windowopenactiv
boostactive

These are indications as well as commands (sethkrwindowopen,sethkrboost) and when commanded they act with the provided time limit (max. 24h). For activation of boost/windowopen the following sequence applies:

set the activetime to the desired value in minutes
activate the activ (from false -> true)
the acteendtime changes to the target For deactivation of boost/windowopen the following sequence applies:
deactivate the activ (from true -> false)
the acteendtime changes to unixtime=0

fritzdect implementation

From the above API possibilities the thermostat has different modes in point of view of iobroker.adapter:

auto (temperature control), to be set by hkrmode (0) or button "setmodeauto" -> the tsoll value will be used!
night if tsoll = absenk
comfort if tsoll = komfort
on (full open), to be set by hkrmode (1) or button "setmodeon"
off (full close), to be set by hkrmode (2) or button "setmodeoff"
boost (full open for limited time), detected by feedback boostactive, can be set by boostactive (false->true)
windowopen (full closed for defined time), detected by feedback windowopenactiv, can be set be windowopenactiv (false->true)
holiday (temp control), detected by holidayactive
summer (temp control), detected by summeractive

ioBroker objects

objects in italic are not part of all fritz.box configurations objects in bold are datapoints from the adapter

The datapoints are created on the basis of the returned values of the Fritz AHA API. All groups or devices start wirth "DECT_".

devices or groups

Object	Value	settable	Description	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
id	text	-	internal id of device	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
name	text	-	name of device	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
productname	text	-	product name	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
manufacturer	text	-	product manufacturer	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
fwversion	text	-	product FW version	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
mode	text	-	mode, manuell or auto	DECT2x0	DECT3x0
present	boolean	-	true/false -> connected/not available	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
txbusy	boolean	-	true/false -> cmd sending active/not active	DECT2x0	DECT3x0	DECT400	DECT440	DECT500	Blinds	Contact
batterylow	boolean	-	battery status		DECT3x0	DECT400	DECT440			Contact
battery	number	-	actual capacity in %		DECT3x0	DECT400	DECT440			Contact
state	boolean	-/x	true/false	DECT2x0				DECT500	Blinds	Contact
power	number	-	actual power in W	DECT2x0
energy	number	-	actual energy consumption in Wh	DECT2x0
voltage	number	-	actual voltage in V	DECT2x0
lock	boolean	-	UI/API lock	DECT2x0	DECT3x0
devicelock	boolean	-	Button lock	DECT2x0	DECT3x0
celsius	number	-	actual temperature in °C	DECT2x0	DECT3x0		DECT440
offset	number	-	offset temperature in °C	DECT2x0	DECT3x0		DECT440
rel_humidity	number	-	relative humidity %				DECT440
tist	number	-	actual temperature in °C		DECT3x0
tsoll	number	x	target temperature in °C		DECT3x0
komfort	number	-	comfort temperature in °C		DECT3x0
absenk	number	-	night temperature in °C		DECT3x0
hkrmode	array	x	0=AUTO/1=OFF/2=ON state of thermostat		DECT3x0
lasttarget	number	-	last target temperature in °C		DECT3x0
errorcode	number	-	errorcode		DECT3x0
operationList	number-	list of possible modes		DECT3x0
operationMode	number	-	actual mode		DECT3x0
windowopenendtime	time	-	time when open window status ends		DECT3x0
windowopenactiv	boolean	x	status and cmd of window open detection		DECT3x0
windowopenactivtime	number	x	time (minutes) when activation of window open		DECT3x0
boostactive	boolean	x	boost mode active status and cmd		DECT3x0
boostactiveendtime	time	-	time when boost status ends		DECT3x0
boostactivtime	number	x	time (minutes) when activation of boost		DECT3x0
adaptiveHeatingRunning	boolean	-	adaptive heating status		DECT3x0
adaptiveHeatingActive	boolean	x	adaptive heating cmd		DECT3x0
setmodeauto	number	x	set Auto		DECT3x0
setmodeon	number	x	set On		DECT3x0
setmodeoff	number	x	set Off		DECT3x0
summeractive	boolean	-	summer program status		DECT3x0
holidayactive	boolean	-	holiday program status		DECT3x0
tchange	number	-	temp with next change in °C		DECT3x0
endperiod	time	-	time when next change is active		DECT3x0
supported_modes	number	-	supported colormodes					DECT500
fullcolorsupport	boolean	-	fullcolorsupport					DECT500
mapped	boolean	-	indication mapped					DECT500
unmapped_hue	number	-	unmapped hue value					DECT500
unmapped_saturation	number	-	unmapped saturation value					DECT500
current_mode	number	-	actual colormode					DECT500
level	number	x	level 0-255					DECT500	Blinds
levelpercentage	number	x	level 0-100 %					DECT500	Blinds
hue	number	x	color 0-359					DECT500
saturation	number	x	saturation 0-100					DECT500
temperature	number	x	color temperature (white mode)					DECT500
lastpressedtimestamp	time	-	timestamp			DECT400	DECT440			Contact
blindsopen	booelan	x	target open						Blinds
blindsclose	boolean	x	target close						Blinds
blindsstop	boolean	x	target stop						Blinds
lastalertchgtimestamp	time	-	timestamp						Blinds
enpositionsset	boolean	-	status configuration						Blinds
mode	text	-	modus						Blinds

stats (part of device)

Object	Value	settable	Description
count	number	-	count of the values in array
grid	number	-	time between values in array in s
datatime	number	-	reference timestamp for array
stats	array	-	array of values

Above is available for power and voltage. Additional the energy has monthly and daily array and their belonging descriptive data. Furthermore for energy the array values are summed up for:

today
last 31 days
month to date
last 12 month
year to date

groups

Object	Value	settable	Description
masterdeviceid	text	-	internal id of group
members	text	-	member id's of group
masterdeviceid	boolean	-	cmd sending active
synchronized	boolean	-	devices of group are synchron

templates

Object	Value	settable	Description
toggle	boolean	x	toggle switch for template activation
lasttemplate	text	-	last confirmed template

routines

Object	Value	settable	Description
active	boolean	x	toggle switch for routine activation

API limitations

Boost and WindowOpen can only be set for the next 24h. time=0 is cancelling the command
updates to the thermostat are within a 15min range, depending on the previous communication of thermostat with fritzbox the next cycle is sooner or later, but definitely not imediately after an ioBroker intervention
if a windowopenactiv is set on a thermostat, which is part of a group, then the whole group and its thermostats is set to windowopenactiv (function inside the FB)
only a few color temperatures are accepted (mapped already be the API to valid ones)
only the predefined colors are valid combinations (getcolordefaults)

Write only on changes to the objects

This is a new feature to write only the changes to the objects. It reduces the logging and might be useful. If it is activated, a different feedback must be present to the actual state. Introducing a hysteresis makes not really practicable:

if temperatures have a change, it is a change and the 0.5° step does not need a threshold
values which are increasing over time would need an absolut threshold and not in %
values scaled to 100 are transmitted in steps of 1, so a threshold of 1% is capturing the same steps otherwise it is more complex and individually to be parametrized.

Known Adapter Limitations:

Not all FW-versions of fritz.box support all objects.
use exclude possibility in adapter config, to disable communication related to newer functions

TODO:

map of data input from user to valid predefined colors (nearest match)
blind alert state -> decode bit array
DECT 350 (batterylow, battery)

Changelog

2.5.11 (npm)

upadate devDeps, linting error corrections
iob checker corrections

2.5.10

more loggimg for issue #500 of restart loop
some error messages downgraded to warnings
correction related to thermostat value take over, when reduced setting is activated
update devDeps

2.5.9 (npm)

correction for statistics,
new message box password needs to be reentered in versions >=2.5.4
xml output for buttons "my ..."

2.5.8 (npm)

more error checking processing statistics

2.5.7 (npm)

only for the hint that password needs to be reentered

2.5.6 (npm)

change in jsonUIconfig

2.5.5 (npm)

implementation of jsonUIconfig

2.5.4 (npm)

correction for excluding routines

2.5.3 (npm)

correction for updating komfort, absenk
corrections for the statistics polling when device is not plugged in
correction for year to date energy value (not recognizing two digit month)
new possibility in admin page to exclude templates/routines/statistics for compatibility with older FB

2.5.2 (npm)

correction for komfort, absenk if receiving 253/254 for OFF/ON it will be NaN see issue #164

2.5.1

correction for energy today value

2.5.0

getbasicdevicestats for powermeter (voltage, power, energy)
derived values from energy stats -> year to date, month to date, last 12 month, last 31 days, todays accumulation

2.4.1 (npm)

corrections reported by adapter-checker

2.4.0

new function for routines which activatetrigger
correction for templates and scenario (all templates are buttons, no need to check functionbitmask)

2.3.1

new function gettriggerlist in admin
corrected xml2json-light (included drirectly in repo until PR#8 is merged in repo), caused problems with templates in newer FB-firmware

2.3.0

option to set for logging only when a difference to the old value is detected
fritzdect-aha-nodejs as dependency

2.2.6

new objects for thermostat adaptiveHeatingRunning, adaptiveHeatingActive

2.2.5

several improvements for error handling
handling of invalid xml-answer for check user rights

2.2.4

correction: number format from admin page for times and tsoll

2.2.3 (npm)

buttons setmodeon/off/auto have now initial value false, and when triggered with true get false again (for next trigger)
buttons blindsclose/stop/open have now initial value false, and when triggered with true get false again (for next trigger)
boostactivetime and windowopenactivetime can now be set to a default value in the adapter config
new default temperature target in admin config (used if tsoll is not available e.g. object tree deleted and thermostat off/on)
corrections for handling the initial value for tsoll/lasttarget when thermostat is off/on

2.2.2 (npm)

license update
corrected doc/de

2.2.1

correction of "My colors" FB is not answering with valid xml
added test script (fritz.js) for login check in doc/de

2.2.0 (npm)

refactoring of API to FB, single instance with relogin after experied session
refactoring main.js
using http.request instead of deprecated @root/request
log the user permissions
remove fasthack for OFF/ON, upper range tchange, absenk, komfort = 32
limitation of boost/windowopen activation to 24h
correction of "present" (issue #224)

2.1.16

temperature range in sockets 0..32°C -> -20..50°C
fast hack for OFF/ON feedback via temperature 253/254*0,5 -> upper range tchange, absenk, komfort = 128
fast mod for fwversion for HAN-FUN
present message correction

2.1.15 (npm)

correction in timestamp as date/string
several version bumps

2.1.14

operationmode and hkrmode tracking also after commands
extended datapoints for blinds from Rollotron
presence=0 was detected but not written to the datapoint, now corrected (skipping the updated is not affected)

2.1.13

correction at group of switches (switchtype not recognized -> simpleonoff)
functionbitmask 32768 moved to role: switches

2.1.12 (npm)

new values for DECT500
back to full unit testing

2.1.11 (npm)

template for fritzfon

2.1.10

comfort/night is AUTO but reintroduced as operationmode

2.1.9

info to user after start of adapter

2.1.8

simpleonoff plug as device/group/template (telekom)

2.1.7 (npm)

boostactivetime/windowactivetime only value

2.1.6

pbkdf2 hash correction in calculation

2.1.5

pbkdf2 hash correction in output to fritzbox

2.1.4

removed the dependency to vis

2.1.3

presence=0 continue

2.1.2

withoit info.connection

2.1.1

error handling in msgbox

2.1.0

more refactoring => adapter based on class, gitCI instead of travisCI
new thromastat buttons (setmodeauto, setmodeon,setmodeoff)

2.0.0 Breaking Changes in datapoints and structures (npm)

refactoring of the code
new fritzapi to either used md5 or pbkf2 decryption, needed for fritzbox FW >7.24
usage of AHA API returned values as datapoint identifier
grouping of buttons under the DECT440
DECT500 groups
accepting blocktime from fritzbox
announcing new detected datapoints delivered by fritzbox
option strictSSL (experimental)

1.1.4 (npm)

blinds control
update testing

1.1.3 (npm)

setcolor cmd correction
only valid color temperatures for white

1.1.2

merge boost and boost active
merge windowopen and windowopenactive
DECT440 test

1.1.1 (npm)

getColorDefaults in Admin, prepared but format of xml can no

1.1.0

new features of AVM API 1.33
- setblind
- sethkrboost
- setwindowopen
- txbusy, windowopenactiveendtime, boostactiveendtime, boostactive
fade duration
DECT440
DECT500

1.0.1 (npm)

bugfixes in fritz API calls
error code 303 (but unknown what it means)
(Black-Thunder) targetTemp=null
(PascalBru) datapoint nextchange in hkr

1.0.0 Breaking Change for non-native API objects

merge of fritzapi into repo directly including added DECT500 commands
no longer support of non-native API calls (scraping of website)
- GuestWLAN
- BatteryCharge
- OS version
correction of timestamp to date conversion for DECT400

0.3.2 (npm)

new states in heater group, operationList and operationMode

0.3.1 (npm)

(scrounger) new states in COMET, operationList and operationMode

0.3.0 (npm)

new DECT500 supported (without commands)

0.2.5 (npm)

fixed testing
correction for indication of actualtemp in heater groups
connection type and datasource added in io-package.json
correction pf switch and alert state (boolean in update routine)

0.2.4 (npm)

(Scrounger) correction of type mismatch (string boolean)

0.2.3 (npm)

skip updating values, when device not present

0.2.2 (npm)

added FritzDECT400 incl. testing
removed offset in temp value
new datapoint offset
added template for switches
added template testing

0.2.1 (npm)

gulp added
correction for DECT100 without temperature (caused a stop in creation of objects)
template creation corrected
my templates added in admin page

0.2.0

compact mode

0.1.5 (npm)

reading and activation of templates added
correction of actual temperature in DECT200 and COMET (now offset recognized)
password now hidden typed and encrypted
new datapoint actualtemp for Comet
fritzapi 0.10.5

0.1.4 (npm)

button added, only send the timestamp of last click
fritzapi 0.10.4

0.1.3 (npm)

windowopenactiv added to thermostat

0.1.2 (npm)

errorcode string->number
batterylow -> boolean
switch in admin for non native API call for battery charge in % (shall prevent 403 message logs)

0.1.1 (npm)

switch for GuestWLAN when no access is granted and polling creates an error
check for devices in admin page for better access to the xml/json stream from fritzbox
admin v3 implemented

0.1.0 (npm)

major code change to use the xml stream instead the dedicated API-commands for the dedicated values
creation of objects according the feedback from fritzbox
support of groups
still usage of non-universal object names
more objects

0.0.14 (npm)

correction of temp offset influence

0.0.13 (npm)

DECT200 voltage new object
DECT200 mode/lock value polling
Comet mode as number and not array
ADMIN v3

0.0.12 (npm)

changed state to mode AUTO/OFF/ON for thermostat (including datapoint lasttarget when going back to AUTO)
added name state for thermostat
DECT100 temperature reading
Contact reading

0.0.11 (npm)

added state OFF/ON for thermostat

0.0.10 (npm)

change to object oriented interface
getOSversion when starting for log

0.0.9 (npm)

values '1' accepted for ON
values '0' accepted for OFF

0.0.8 (npm)

messages info-> debug
values 1/true/on/ON accepted for ON
values 0/false/off/OFF accepted for OFF

0.0.7 (npm)

current temp of Comet/DECT300
cyclic polling GuestWLAN

0.0.6 (npm)

correction targettemp in DECT200 section

0.0.5 (npm)

setTemp on COMET
GuestWlan corrected

0.0.4 (npm)

cyclic status polling

0.0.3 (npm)

user now configurable

0.0.2 (npm)

metro widget for Dect200
smartfritz-promise->fritzapi
running version, tested with 1x DECT200 and Fritzbox FW=6.51 on Win10 with 4.5.0 and raspberry 4.7.0

0.0.1

running version, tested with 1x DECT200 and Fritzbox FW=6.30

License

The MIT License (MIT)

Name		Name	Last commit message	Last commit date
Latest commit History 1,775 Commits
.github		.github
.vscode		.vscode
admin		admin
docs/de		docs/de
lib		lib
test		test
widgets		widgets
.create-adapter.json		.create-adapter.json
.eslintrc.json		.eslintrc.json
.gitignore		.gitignore
.npmignore		.npmignore
LICENSE		LICENSE
README.md		README.md
eslint.config.mjs		eslint.config.mjs
io-package.json		io-package.json
main.js		main.js
main.test.js		main.test.js
package-lock.json		package-lock.json
package.json		package.json
tsconfig.check.json		tsconfig.check.json
tsconfig.json		tsconfig.json