Skip to content

formorer/file-rc

Repository files navigation

A config file for runlevels
---------------------------

The traditional "SysV" scheme of implementing runlevels is through links
in "/etc/rc?.d/*". The main problem with this links is that you can't
get easily a survey of your setup.
I rewrote the "rc"-program so it handles _one_ config file instead of
many links in "/etc/rc?.d/*". Here's an extract from it's config file:

        # This is the configuration file for /etc/debian/runlevel.conf
        #
        #Format:
        #<sort> <off>   <on>            <script>
        05      -       0               /etc/init.d/halt
        05      -       1               /etc/init.d/single
        05      -       6               /etc/init.d/reboot
        10      0,1,6   2,3,4,5         /etc/init.d/sysklogd
        12      0,1,6   2,3,4,5         /etc/init.d/kerneld
[..]
        89      0,1,6   2,3,4,5         /etc/init.d/cron
        99      -       2,3,4,5         /etc/init.d/rmnologin
        99      0,1,6   2,3,4,5         /etc/init.d/xdm


The syntax should be fairly obvious:

      * The first column is the sort criteria for starting and
        stopping (reverse order) the scripts.

      * The second column consists of a comma-seperated list of
        runlevels in which the script should be switched "off"
        - or -
        a single "-" if the script should never be stopped (within
        that sort-number).

      * The third column consists of a comma-seperated list of
        runlevels in which the script should be switched "on" 
        - or -
        a single "-" if the script should never be started (with
        that sort-number).

      * The last column specifies the full name of the script.


The alternate "rc"-programm uses built-in bash functions only and does
not rely on any external program installed. Performance is quite good
and delays execution of a script 0.075 seconds (average value on an old
ISA-486).

A script to convert your current link-setup into a configuration file
is available as well as an almost compatible "update-rc.d"-program. To
edit the configuration file you can use your favourite editor. :-)
With the files in this directory try

        ./rclink2file.sh > runlevel.conf
        export PRELEVEL=N    # previous runlevel, N = Booting
        ./rc 2               # "switch" to runlevel "2"

To be on the save side, the alternate "rc" only prints the commands
it would execute for now.
The disadvantages (which don't apply to the method with links) as far
as I can see them:

      * Modifications require the whole file to be rewritten, which
        is a source for errors.

      * Inserting and removing is not done via well-understood utilities
        like "ln" and "rm".

      * The "sort numbers" are not evaluated by "rc" (this could be
        seen as a feature, too).

      * There is almost no experience with this new technique.


Advantages beside the easeness:

      * You can easily make backups of the config file and use
	standard software like "diff" to compare "working" and
	"not working" configuration files. Try that with a bunch
        of several hundred symlinks.

      * No special tool required, you can use your favorite editor
        to maintain the configuration manually.

      * Symbolic runlevels like "reboot" can be easily supported
        (although the numbers are more comprehensive).

      * The sort-numbers could be replaced by symbolic names, too.

      * "Update-rc.d" is quite fast (2-3s on an old ISA-486 = up to
        10 times faster than the old one).


Of course even more complicated setups can be expressed in the
configuration file:

        #Format:
        #<sort> <on-> <off-levels>  <script>
        15      0       -               /etc/init.d/foo
        17      1       -               /etc/init.d/foo
        19      6       -               /etc/init.d/foo
        14      -       5               /etc/init.d/foo
        80      -       2               /etc/init.d/foo
        84      -       3,4             /etc/init.d/foo

About

Alternative boot mechanism using a single configuration file

Resources

Stars

Watchers

Forks

Packages

No packages published