fix(a380x): GSX config update by Chris (#9117)

* version 1 + GSX right front

* update after vote

* revert camera changes

* GSX config update

(cherry picked from commit b935e87)

fbw-a380x/src/base/flybywire-aircraft-a380-842/SimObjects/AirPlanes/FlyByWire_A380_842/GSX.cfg

@@ -10,68 +10,84 @@ pushbackdummyevent = 0
 pushbackcheckengines = 0
 ignoreicing = 0
 iscargo = 0
-trafficcones = 0
+trafficcones = 1
 preferredexit =  0
-wingrootpos = 2.36 -1.89 0.85
-wingtippos = 15.70 -7.41 1.84
+wingrootpos = 7.23 0.50 0.58
+wingtippos = 24.45 -6.42 2.58
 fuelpos = -18.82 3.00 1.78
-waterpos = 1.28 -18.07 0.52
-lavatorypos = 0.59 -18.07 0.12
-gpupos = 3.29 11.06 -1.56
+waterpos = 0.40 -8.69 -1.94
+lavatorypos = -0.28 -18.20 -0.63
+gpupos = 0.54 29.31 -1.49
 bypasspinpos = 0.00 30.46 -0.09
 engine1pos = -25.78 3.39 2.34
 engine2pos = 14.91 11.27 -1.08
 engine3pos = 25.79 3.31 -0.28
 engine4pos = 25.79 3.31 2.43
 engine5pos = 0.00 0.00 0.00
 engine6pos = 0.00 0.00 0.00
-paxseatspos =  []
 
 [exit1]
-pos = -2.59 28.86 0.94 4.00
+pos = -3.08 28.90 0.94 9.00
 code = 1
-name = Passenger Door
+name = Door M1L
 ceiling = 1.8
 embeddedStair = 0
 
 [exit2]
-remove = 1
+pos = -3.53 18.63 0.90 0.00
+code = 3
+name = Door M2L
+ceiling = 1.8
+embeddedStair = 0
 
 [exit3]
-pos = -1.60 -16.15 0.97 -12.00
-code = 3
-name = Passenger Aft Door
+pos = -3.50 -9.64 1.01 0.00
+code = 7
+name = Door M4L
 ceiling = 1.8
 embeddedStair = 0
 
 [exit4]
-remove = 1
+pos = -3.13 -18.64 0.96 -7.00
+code = 9
+name = Door M5L
+ceiling = 1.8
+embeddedStair = 0
 
 [service1]
-remove = 1
+pos = 3.53 18.67 1.11 -1.00
+code = 4
+name = Catering Door M2R
+ceiling = 1.8
+embeddedStair = 0
 
 [service2]
-pos = 1.80 -16.15 1.03 12.00
-code = 4
-name = Service Door AFT
+pos = 3.45 14.23 3.90 -1.00
+code = 12
+name = Catering Door U1R
 ceiling = 1.8
 embeddedStair = 0
 
 [cargo1]
 pos = 1.49 23.36 -1.16 -0.39
-code = 6
-name = Cargo Door
+code = (L:A32NX_FWD_DOOR_CARGO_POSITION, number) 80 >
+name = FWD Cargo Door
 ceiling = 1.8
 embeddedStair = 0
-uldcode = BELT
+uldcode = AAF,AAP,AKE,ALF,ALP,AMP,PLA,PMC,QKE
 
 [cargo2]
-pos = 1.42 -13.14 -1.06 -0.39
-code = 6
-name = Cargo Door
+pos = 1.62 -13.27 -0.81 0.61
+code = (L:A32NX_AFT_DOOR_CARGO_POSITION, number) 80 >
+name = AFT Cargo Door
 ceiling = 1.8
 embeddedStair = 0
-uldcode = BELT
+uldcode = AAF,AAP,AKE,ALF,ALP,AMP,PLA,PMC,QKE
 
 [cargomain]
-remove = 1
+pos = 2.01 -16.12 -0.73 13.00
+code = (L:A32NX_AFT_DOOR_CARGO_POSITION, number) 80 >
+name = Bulk Cargo Door
+ceiling = 1.8
+embeddedStair = 0
+uldcode = BELT