nfc cli: remove test commands

flipperdevices · Oct 17, 2023 · 2baad11 · 2baad11
1 parent 185c444
commit 2baad11
Showing 1 changed file with 18 additions and 70 deletions.
diff --git a/applications/main/nfc/nfc_cli.c b/applications/main/nfc/nfc_cli.c
@@ -4,94 +4,40 @@
 #include <lib/toolbox/args.h>
 #include <lib/toolbox/hex.h>
 
-#include <drivers/st25r3916.h>
-#include <nfc/nfc.h>
 #include <furi_hal_nfc.h>
-#include <furi_hal_nfc_i.h>
-
-#include <furi_hal_resources.h>
-#include <signal_reader/parsers/iso15693/iso15693_parser.h>
 
 #define FLAG_EVENT (1 << 10)
 
 static void nfc_cli_print_usage() {
     printf("Usage:\r\n");
     printf("nfc <cmd>\r\n");
     printf("Cmd list:\r\n");
-    printf("\tdetect\t - detect nfc device\r\n");
-    printf("\temulate\t - emulate predefined nfca card\r\n");
-    printf("\tapdu\t - Send APDU and print response \r\n");
     if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
         printf("\tfield\t - turn field on\r\n");
     }
 }
 
-static void furi_hal_nfc_iso15693_listener_transparent_mode_enter(FuriHalSpiBusHandle* handle) {
-    st25r3916_direct_cmd(handle, ST25R3916_CMD_TRANSPARENT_MODE);
-
-    furi_hal_spi_bus_handle_deinit(handle);
-    furi_hal_nfc_deinit_gpio_isr();
-}
-
-static void furi_hal_nfc_iso15693_listener_transparent_mode_exit(FuriHalSpiBusHandle* handle) {
-    // Configure gpio back to SPI and exit transparent mode
-    furi_hal_nfc_init_gpio_isr();
-    furi_hal_spi_bus_handle_init(handle);
-
-    st25r3916_direct_cmd(handle, ST25R3916_CMD_UNMASK_RECEIVE_DATA);
-}
-
-static void furi_hal_nfc_iso15693_parser_callback(Iso15693ParserEvent event, void* context) {
-    furi_assert(context);
-
-    if(event == Iso15693ParserEventDataReceived) {
-        FuriThreadId thread_id = context;
-        furi_thread_flags_set(thread_id, FLAG_EVENT);
-    }
-}
-
-// TODO remove this test command
-static void nfc_cli_check(Cli* cli, FuriString* args) {
+static void nfc_cli_field(Cli* cli, FuriString* args) {
     UNUSED(args);
-    UNUSED(cli);
-    FuriHalSpiBusHandle* handle = &furi_hal_spi_bus_handle_nfc;
-    uint8_t data[100] = {};
-    size_t bits = 0;
+    // Check if nfc worker is not busy
+    if(furi_hal_nfc_is_hal_ready() != FuriHalNfcErrorNone) {
+        printf("NFC chip failed to start\r\n");
+        return;
+    }
 
-    Nfc* nfc = nfc_alloc();
+    furi_hal_nfc_acquire();
     furi_hal_nfc_low_power_mode_stop();
-    furi_hal_nfc_set_mode(FuriHalNfcModeListener, FuriHalNfcTechIso15693);
-    furi_hal_nfc_iso15693_listener_transparent_mode_enter(handle);
-    Iso15693Parser* instance = iso15693_parser_alloc(&gpio_spi_r_miso, 1024);
-
-    FuriThreadId thread_id = furi_thread_get_current_id();
-    furi_thread_set_current_priority(FuriThreadPriorityHighest);
-    iso15693_parser_start(instance, furi_hal_nfc_iso15693_parser_callback, thread_id);
+    furi_hal_nfc_poller_field_on();
 
-    while(true) {
-        uint32_t flag = furi_thread_flags_wait(FLAG_EVENT, FuriFlagWaitAny, FuriWaitForever);
-        furi_thread_flags_clear(flag);
+    printf("Field is on. Don't leave device in this mode for too long.\r\n");
+    printf("Press Ctrl+C to abort\r\n");
 
-        if(flag & FLAG_EVENT) {
-            if(iso15693_parser_run(instance)) {
-                iso15693_parser_get_data(instance, data, sizeof(data), &bits);
-                break;
-            }
-        }
+    while(!cli_cmd_interrupt_received(cli)) {
+        furi_delay_ms(50);
     }
 
-    for(size_t i = 0; i < bits / 8; i++) {
-        printf("%02X ", data[i]);
-    }
-    printf("\r\n");
-
-    iso15693_parser_stop(instance);
-    furi_hal_nfc_iso15693_listener_transparent_mode_exit(handle);
-
-    iso15693_parser_free(instance);
-    furi_hal_nfc_reset_mode();
     furi_hal_nfc_low_power_mode_start();
-    nfc_free(nfc);
+    furi_hal_nfc_release();
 }
 
 static void nfc_cli(Cli* cli, FuriString* args, void* context) {
@@ -104,9 +50,11 @@ static void nfc_cli(Cli* cli, FuriString* args, void* context) {
             nfc_cli_print_usage();
             break;
         }
-        if(furi_string_cmp_str(cmd, "c") == 0) {
-            nfc_cli_check(cli, args);
-            break;
+        if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
+            if(furi_string_cmp_str(cmd, "field") == 0) {
+                nfc_cli_field(cli, args);
+                break;
+            }
         }
 
         nfc_cli_print_usage();