pypavlok

Unofficial Python Bluetooth Pavlok API

Official Pavlok API makes requests to cloud service to send message to your tablet which will send Bluetooth command to your device. It works for tablet apps, but it is a very indirect way to zap people.

This package controls Pavlok directly with Bluetooth commands.

Requirements

• Bluetooth 4 compatible adapter (Pavlok uses Bluetooth Low Energy)
• Bluez
• gattlib to interface gatttool
• Python 2.7
• Linux (I haven't tested the code with anything else)

Installation

Use pip:

pip install pypavlok

Be sure to install gattlib dependencies: boost-python, boost-thread and glib2

Usage

>>> from pypavlok import PyPavlok
>>> pavlok = PyPavlok() #If MAC address is not specified, it will be found using service discovery (requires root privileges)
>>> pavlok = PyPavlok('00:07:80:B5:9A:31', 'hci0') #Or pass MAC address (doesn't require special permissions)
>>> pavlok.battery_level
95
>>> pavlok.shock()
>>> pavlok.shock(level=50) #50% discharge
>>> pavlok.beep()
>>> pavlok.beep(count=3, duration_on=200, duration_off=100) #3 beeps by 0.2 sec with interval 0.1 sec
>>> pavlok.led()
>>> pavlok.led(led1=False, led2=True, count=5, duration_off=300) #Blink with red LEDs 5 times by 1 sec with interval 0.3 sec
>>> pavlok.vibrate()
>>> pavlok.firmware_revision
'2.4.28'
>>> pp.is_connected() #PyPavlok inherits from GATTRequester
True
>>> pp.disconnect()
>>> pp.is_connected()
False

All action methods (shock, vibrate, led, beep) share common set of parameters:

• level: discharge percents for shock(), tone for beep(), vibration speed for vibrate(), not used in led(). Default: 50
• count: number of repetitions. Default: 1
• duration_on: duration of action in milliseconds (<= 5 sec). Default: 1 sec
• duration_off: if count > 0, set the interval between repetitions in milliseconds (<= 5 sec). Default: 1 sec

Checking your setup

Check if your bluetooth adapter is up:

$ sudo hciconfig

<device name> hci0:   Type: BR/EDR  Bus: USB

<device status> DOWN

If the status is down, run:

$ sudo hciconfig <device name> up

Search for BLE devices:

$ sudo hcitool lescan

LE Scan ...

<MAC address like xx:xx:xx:xx:xx:xx> Pavlok-xxxx

Ctrl-C

Try to connect to Pavlok with gatttool:

$ gatttool -b <MAC address> -I

[<MAC address>][LE]> connect

Attempting to connect to <MAC address>

Connection successful

[<MAC address>][LE]> primary

attr handle: 0x0001, end grp handle: 0x0007 uuid: 00001800-0000-1000-8000-00805f9b34fb

attr handle: 0x0008, end grp handle: 0x001a uuid: 0000180a-0000-1000-8000-00805f9b34fb

If you got to this point, everything should work

Troubleshooting

• Pavlok has a reset function: try pressing The Zap Button for about 15 seconds

• If you get error RuntimeError: Characteristic value/descriptor operation failed: Attribute requires authentication before read/write, pass additional parameter security_level='medium' to PyPavlok.__init__:

  >>> pavlok = PyPavlok(security_level='medium')

• If you cannot connect to device, try to connect with gatttool, it will help you understand if the problem is with pypavlok or with Bluetooth stack.

  If you get error like GLib-WARNING: Invalid file descriptor, remove directory /var/lib/bluetooth/<your_bluetooth_adapter_mac> and restart bluetooth service

• If you updated gattlib dependencies and it stoped working, pip install --force-reinstall won't help, because compiled version of gattlib is in pip cache and is not recompiled.

  Remove the compiled library from pip cache -- search for gattlib.so in /root/.cache