Skip to content

Pipeline for analyzing (rare) mutations in metagenome-assembled genomes

License

Notifications You must be signed in to change notification settings

fedarko/strainFlye

Repository files navigation

strainFlye

strainFlye CI Code Coverage bioconda

strainFlye is a pipeline for calling, analyzing, and phasing rare single-nucleotide mutations in metagenome-assembled genomes produced from long and accurate reads—for example, PacBio HiFi reads.

The main inputs to strainFlye are 1) reads and 2) contigs. However, most steps in the pipeline can be "jumped to" if you already have other files prepared (e.g. an alignment of reads to contigs, or existing single-nucleotide mutation calls within contigs). See below for a flow chart of strainFlye's pipeline (created with Mermaid); if you have trouble viewing this flow chart, here are some other ways to view it.

flowchart LR
    classDef art fill:#acfeb1,stroke:#086408,color:black
    classDef pgm fill:#88bbff,stroke:#3333aa,color:black
    classDef ext fill:#ffbb88,stroke:#755237,color:black
    0(("Contigs<br/>(FASTA)")):::art --> A:::pgm;
    1(("Reads<br/>((gzipped) FASTA<br/>or FASTQ)")):::art ---> A
    2(("Assembly graph<br/>(GFA 1)")):::art -.->|"(Optional)"| A
    A[strainFlye align] --> 3(("Alignment of<br/>reads to contigs<br/>(Indexed BAM)")):::art
    3 --> C["strainFlye call p-mutation<br/>(Call mutations<br/>using frequencies)"]:::pgm
    0 --> C
    3 --> D["strainFlye call r-mutation<br/>(Call mutations<br/>using read counts)"]:::pgm
    0 --> D
    C --> 4(("Called mutations<br/>(Indexed BCF)")):::art
    C --> 5(("Diversity indices<br/>(TSV)")):::art
    D --> 4
    D --> 5
    0 --> E[strainFlye fdr estimate]:::pgm
    3 --> E
    4 --> E
    5 -..->|"(Optional)"| E
    E --> 6(("FDR estimates<br/>(TSV)")):::art
    E --> 7(("Number of<br/>mutations / Mb<br/>(TSV)")):::art
    7 --> Z{"Plotting FDR curves<br/>(see tutorial)"}:::ext
    6 --> Z
    6 --> F[strainFlye fdr fix]:::pgm
    4 --> F --> 11(("Mutations with<br/>fixed FDR<br/>(Indexed BCF)")):::art
    11 --> G[strainFlye spot hot-features]:::pgm
    8(("Contig #quot;features#quot;<br/>[probably genes]<br/>(GFF3)")):::art --> G
    G --> 9(("Hotspot features<br/>(TSV)")):::art
    11 --> H[strainFlye spot cold-gaps]:::pgm --> 10(("Coldspot gaps<br/>(TSV)")):::art
    4 -.->|If desired, you can skip FDR estimation and fixing and use the unfiltered BCF file for downstream analyses| 11
    11 --> I[strainFlye smooth create]:::pgm --> 12(("Smoothed and<br/>virtual reads<br/>(gzipped FASTA)")):::art
    0 --> I
    3 --> I
    5 -.->|"(Optional)"| I
    12 --> J[strainFlye smooth assemble]:::pgm --> 13(("LJA assemblies")):::art
    11 --> K
    0 --> K[strainFlye link nt]:::pgm --> 14(("Nucleotide<br/>(co-)occurrence<br/>information<br/>(Pickle)")):::art
    3 --> K
    14 --> L[strainFlye link graph]:::pgm --> 15(("Link graphs<br/>(DOT or Pickle)")):::art
    0 --> M[strainFlye matrix count]:::pgm
    3 --> M
    8 ---> M
    M --> 16(("3-mer count<br/>information<br/>(Pickle)")):::art
    16 --> N[strainFlye matrix fill]:::pgm --> 17(("Mutation matrices<br/>(TSV or JSON)")):::art
    0 --> O[strainFlye dynam covskew]:::pgm --> 18(("Coverage and<br/>skew statistics<br/>(TSV)")):::art
    3 --> O
    2 --> P[strainFlye utils gfa-to-fasta]:::pgm --> 0

Loading

Installation

Long story short, strainFlye is an ordinary Python package (currently supporting Python 3.6 and 3.7). strainFlye depends on a few non-Python tools (e.g. minimap2, Prodigal, SAMtools), also.

Installation using conda (recommended)

The simplest way to install strainFlye is by using conda (or mamba). strainFlye is available through the bioconda channel:

conda install -c bioconda strainflye

Sidenote: troubleshooting installation problems

  • If you run into dependency conflicts when installing strainFlye into an existing conda environment, you may want to just create a new conda environment and install strainFlye into that. (See the "workaround solution" given in this issue for an example.)

  • If that still doesn't work, you can try installing from source -- see below.

  • And if that doesn't work, no worries -- installing this stuff can be finicky. Feel free to open an issue and I'll try to help out.

Installation from source

Please see the development documentation (CONTRIBUTING.md) for instructions.

Optional: install LJA in order to run strainFlye smooth assemble

strainFlye's smooth module includes two commands. The first, strainFlye smooth create, creates smoothed and virtual reads for each contig; the second, strainFlye smooth assemble, assembles these reads using LJA. LJA is not installed using the conda installation instructions above, so—in order to run the strainFlye smooth assemble command—you will need to install the LJA software (in particular, the simple_ec branch of LJA).

Please see LJA's manual for the most up-to-date installation instructions. Assuming that you have all of LJA's requirements installed, something like the following should work:

git clone https://github.com/AntonBankevich/LJA.git
cd LJA
git checkout simple_ec
cmake .
make

... but this is subject to change as LJA is updated.

Documentation

Tutorial

This Jupyter Notebook provides a tutorial demonstrating how to use strainFlye.

Command-line usage

First, make sure you've activated the conda environment into which you installed strainFlye. From there, you can use strainFlye like any other command-line tool:

Usage: strainFlye [OPTIONS] COMMAND [ARGS]...

  Pipeline for the analysis of rare mutations in metagenomes.

  Please consult https://github.com/fedarko/strainFlye if you have any
  questions, comments, etc. about strainFlye. Thank you for using this tool!

Options:
  -v, --version  Show the version and exit.
  -h, --help     Show this message and exit.

Commands:
  align   Align reads to contigs, and filter the resulting alignment.
  call    [+] Call mutations in contigs naïvely & compute diversity indices.
  fdr     [+] Estimate and fix FDRs for contigs' naïve mutation calls.
  spot    [+] Identify putative mutational hotspots or coldspots.
  smooth  [+] Create and assemble smoothed and virtual reads.
  link    [+] Create link graphs showing co-occurring alleles.
  matrix  [+] Create codon and amino acid mutation matrices.
  dynam   [+] Compute simple information about growth dynamics.
  utils   [+] Miscellaneous utility commands provided with strainFlye.

Quick descriptions of each strainFlye command

Click on the headers below (e.g. "Alignment") to show details about the corresponding command(s). Input files / folders are listed in parentheses next to each command; optional inputs are given in [square brackets]. Parameters are omitted for the sake of brevity. For more details, try running these commands from the terminal (e.g. strainFlye align --help).

Alignment
  • strainFlye align (contigs, reads, [GFA]) → BAM

    • Aligns reads to contigs using minimap2.
    • Filters this alignment to remove certain types of problematic alignments.
Naïve mutation identification, FDR estimation, and FDR fixing
  • strainFlye call p-mutation and strainFlye call r-mutation (contigs, BAM) → (BCF, diversity indices)

    • Naïvely calls either p-mutations (frequency-based) or r-mutations (read-count-based).
    • Computes diversity indices.
  • strainFlye fdr estimate (contigs, BAM, BCF, [diversity indices]) → (FDR estimates, # mutations / Mb)

    • Estimates the FDRs of naïve mutation calls from strainFlye call using the target-decoy approach.
    • Computes FDR estimates, and the number of naïvely called mutations per megabase, for each "target" (non-decoy) contig. These values can be used to plot FDR curves showing how the FDR estimate for a target contig varies as p or r varies.
  • strainFlye fdr fix (BCF, FDR estimates) → BCF

    • Given a fixed FDR (e.g. f = 1%), returns a filtered BCF file with all target contigs' mutations filtered to use a threshold of p or r yielding an FDR estimate ≤ f.
Hotspot and coldspot identification
  • strainFlye spot hot-features (BCF, GFF3) → hotspot TSV

    • Identifies "hotspot" features from the GFF3 file, based on simple configurable thresholds (e.g. to be a "hotspot," a feature must have at least N mutations).
  • strainFlye spot cold-gaps (BCF) → coldspot TSV

    • Identifies "coldspot" gaps between mutations, considering a gap to be a coldspot if it is at least a certain length.
    • Assigns a p-value to the longest coldspot gap seen in each contig. (Note that the computation of this p-value makes a few simplifying assumptions; see the supplemental material of our paper for details.)
Phasing
  • strainFlye smooth create (contigs, BAM, BCF, [diversity indices]) → smoothed and virtual reads

    • Creates smoothed and virtual reads for each contig. These correspond to the original reads, but modified to remove all differences from the assembled contigs (aside from the mutations in the BCF file).
  • strainFlye smooth assemble (smoothed and virtual reads) → assemblies

    • Uses LJA to assemble smoothed and virtual reads.
    • See notes above about installing the simple_ec branch of LJA, which we rely on here.
    • For information on LJA's outputs (assembled sequences, assembly graph, etc.) please see its manual.
  • strainFlye link nt (contigs, BAM, BCF) → nucleotide (co-)occurrence information

    • Computes nucleotide (co-)occurrence information for each contig.
    • This information is stored in pickle files.
  • strainFlye link graph (nucleotide (co-)occurrence information) → link graphs

    • Converts the output of strainFlye link nt into link graphs (one per contig), representing which alleles of a contig tend to co-occur.
    • Depending on the -f/--output-format parameter, link graphs are saved to either DOT files or to pickle files (each pickle file corresponds to a serialized NetworkX representation of a link graph).
Mutation matrices
  • strainFlye matrix count (contigs, BAM, GFF3) → 3-mer count information

    • Counts 3-mers aligned to the codons in the coding sequences (CDS or SO:0000316 features in the GFF3 file) in each contig.
    • This information is stored in pickle files.
  • strainFlye matrix fill (3-mer count information) → mutation matrices

    • Converts the output of strainFlye matrix count into codon and amino acid mutation matrices.
    • Each contig is represented by its own directory, containing four files: a codon mutation matrix, an amino acid mutation matrix, codon reference counts (the number of times we saw a codon in all the coding sequences of a contig, ignoring mutations), and amino acid reference counts.
    • Depending on the -f/--output-format parameter, these four files are saved as either TSV or JSON files.
Growth dynamics
  • strainFlye dynam covskew (contigs, BAM) → coverage and skew TSVs

    • Computes information about binned coverages and GC skews in each contig.
Miscellaneous utilities
  • strainFlye utils gfa-to-fasta (GFA) → FASTA

    • Converts a GFA 1 file to a FASTA file (and performs some sanity checking on it).

Development documentation

If you're interested in making changes to strainFlye's code, please see CONTRIBUTING.md for some tips on getting started.

Publication and citation

An article describing strainFlye is available in Genome Research at this link. If you use strainFlye in your work, please cite it! The BibTeX for this article is:

@article{fedarko2022,
  author={Fedarko, Marcus W and Kolmogorov, Mikhail and Pevzner, Pavel A},
  title={Analyzing rare mutations in metagenomes assembled using long and accurate reads},
  journal={Genome Research},
  publisher={Cold Spring Harbor Laboratory Press},
  volume={32},
  number={11-12},
  pages={2119--2133},
  year={2022},
  doi={10.1101/gr.276917.122},
  url={http://genome.cshlp.org/content/32/11-12/2119.abstract},
  eprint={http://genome.cshlp.org/content/32/11-12/2119.full.pdf+html}
}

Citing "wrapped tools" within strainFlye

  • If you use strainFlye align, please also cite minimap2 (Li 2018), which is used by this strainFlye command to perform alignment. (Depending on the version of minimap2 you use, you may also want to cite Li 2021.)

  • If you use strainFlye smooth assemble, please also cite LJA (Bankevich et al., 2022), which is used by this strainFlye command to perform assembly.

Miscellaneous notes about minor details you probably don't need to care about

Shell injection (only relevant if this is hosted on a web server)

Some of strainFlye's commands use Python's subprocess module to run non-Python software: minimap2, samtools, bcftools, Prodigal, LJA, etc. Most of the time, we do this using subprocess.run() with shell=False: long story short, this helps prevent the problem of shell injection.

However, as of writing, there are two places where strainFlye uses subprocess.run() with shell=True: in strainFlye align (when running minimap2 and samtools), and in strainFlye smooth assemble (when running LJA). This is for convenience's sake, since we allow the user to pass in extra parameters to these commands (the --minimap2-params option for strainFlye align, and the --lja-params option for strainFlye smooth assemble).

Our use of shell=True in these two cases means that it's possible to make these commands do unexpected things (see Python's documentation here for details). This should not be a problem if you are running strainFlye directly. However, if you decide to host strainFlye on a server somewhere (and you allow users to upload files, specify parameters, etc.) then you should be careful about preventing shell injection in these cases. Feel free to open an issue if you have any questions about this.

Acknowledgements

Test datasets

sample1.gfa (located in strainflye/tests/inputs/) was downloaded from the gfalint repository. The other GFA files in this folder beginning with sample1 are also based on this GFA file.

Tutorial dataset

The strainFlye tutorial (linked above, and located in docs/) uses the "SheepGut" dataset shown in the strainFlye paper. This dataset was previously described in Kolmogorov et al., 2020 and Bickhart & Kolmogorov et al., 2022.

Contact

If you have any questions, suggestions, comments, etc. about strainFlye, please feel free to open an issue in this repository!