minerva-ag: Support log trigger cause up to 7 types (#2160)

Summary:
- Modify log trigger cause to support up to 7 types

Pull Request resolved: #2160

Test Plan: - Build code: PASS

Reviewed By: waffle2k

Differential Revision: D67889584

fbshipit-source-id: d83741c286f80f492c9b7cc4e029fc14e3b06beb

meta-facebook/minerva-ag/src/platform/plat_event.c

@@ -109,7 +109,8 @@ bool vr_error_callback(aegis_cpld_info *cpld_info, uint8_t *current_cpld_value)
 		}
 
 		// Dynamically generate the error code
-		uint16_t error_code = 0x8000 | (bit << 8) | cpld_info->cpld_offset;
+		uint16_t error_code = (CPLD_UNEXPECTED_VAL_TRIGGER_CAUSE << 13) | (bit << 8) |
+				      cpld_info->cpld_offset;
 
 		LOG_ERR("Generated error code: 0x%04X (bit %d, CPLD offset 0x%02X)", error_code,
 			bit, cpld_info->cpld_offset);

meta-facebook/minerva-ag/src/platform/plat_log.h

@@ -21,6 +21,9 @@
 
 #define AEGIS_FRU_LOG_SIZE sizeof(plat_err_log_mapping)
 
+#define LOG_ASSERT 1
+#define LOG_DEASSERT 0
+
 uint16_t error_log_count(void);
 void init_load_eeprom_log(void);
 
@@ -37,61 +40,9 @@ typedef struct __attribute__((packed)) _plat_err_log_mapping {
 	uint8_t cpld_dump[96];
 } plat_err_log_mapping;
 
-enum LOG_ERROR_CODE {
-	LEAK_CHASSIS_0 = 0x0A,
-	LEAK_CHASSIS_1 = 0x0B,
-	LEAK_CHASSIS_2 = 0x0C,
-	LEAK_CHASSIS_3 = 0x0D,
-	LEAK_RPU_INT = 0x0E,
-	LEAK_RPU_EXT = 0x0F,
-	LEAK_MAN_HOT = 0x10,
-	LEAK_MAN_COLD = 0x11,
-	LEAK_MAN_PAN_GPO = 0x6E,
-	LEAK_MAN_FLOOR_GPO = 0x6F,
-	LEAK_MAN_PAN_RELAY = 0x70,
-	LEAK_MAN_FLOOR_RELAY = 0x71,
-	LOW_WATER_LEVEL = 0x02,
-	PUMP_1_SPEED_ABNORMAL = 0x1F,
-	PUMP_2_SPEED_ABNORMAL = 0x20,
-	PUMP_3_SPEED_ABNORMAL = 0x21,
-	PUMP_1_SPEED_RECOVER = 0x29,
-	PUMP_2_SPEED_RECOVER = 0x2A,
-	PUMP_3_SPEED_RECOVER = 0x2B,
-	HIGH_PRESS_DETECTED = 0xA0,
-	FLOW_RATE_SENSOR_TRIGGERED = 0xA1,
-	EMERGENCY_BUTTON_TRIGGERED = 0xA2,
-};
-
-typedef struct _err_sensor_mapping {
-	uint16_t err_code;
-	uint8_t err_num;
-} err_sensor_mapping;
-
-#define LOG_ASSERT 1
-#define LOG_DEASSERT 0
-
-enum err_number {
-	// VR fault error number mapping to sensor number
-
-	// other error number start form here
-	DC_ON_STATUS_FAULT = 0xA0,
-	DC_OFF_STATUS_FAULT,
-	ASIC_FAULT,
+enum LOG_ERROR_TRIGGER_CAUSE {
+	CPLD_UNEXPECTED_VAL_TRIGGER_CAUSE = 0b100,
+	MAX_TRIGGER_CAUSE = 0b1000, //trigger cause maxium 3 bit
 };
 
-enum err_type {
-	VR_FAULT_ASSERT,
-	VR_FAULT_DEASSERT,
-	DC_ON_STATUS_FAULT_ASSERT,
-	DC_ON_STATUS_FAULT_DEASSERT,
-	DC_OFF_STATUS_FAULT_ASSERT,
-	DC_OFF_STATUS_FAULT_DEASSERT,
-	ASIC_FAULT_ASSERT,
-	ASIC_FAULT_DEASSERT,
-	ERROR_TYPE_MAX,
-};
-
-extern const err_sensor_mapping minerva_ag_sensor_err_codes[];
-extern const err_sensor_mapping minerva_ag_sensor_normal_codes[];
-
 #endif