Templates update evcc-io/evcc@749428c

templates/en/vehicle/aiways_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/audi_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/bmw_0.yaml

@@ -25,6 +25,6 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)
       region: EU # optional

templates/en/vehicle/carwings_0.yaml

@@ -26,5 +26,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/citroen_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/cupra_0.yaml

@@ -26,5 +26,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/dacia_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/ds_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/enyaq_0.yaml

@@ -26,6 +26,6 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)
       timeout: 10s # optional

templates/en/vehicle/evnotify_0.yaml

@@ -23,5 +23,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/fiat_0.yaml

@@ -27,5 +27,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/fiat_1.yaml

@@ -27,5 +27,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/flobz_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/ford_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/hyundai_0.yaml

@@ -28,5 +28,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/id_0.yaml

@@ -28,5 +28,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/iso15118_0.yaml

@@ -22,5 +22,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/jaguar-landrover_0.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/jaguar-landrover_1.yaml

@@ -25,5 +25,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/kia_0.yaml

@@ -28,5 +28,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/mazda2mqtt_0.yaml

@@ -24,5 +24,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/mg2mqtt_0.yaml

@@ -26,5 +26,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/mini_0.yaml

@@ -25,6 +25,6 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)
       region: EU # optional

templates/en/vehicle/nissan_0.yaml

@@ -26,5 +26,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)

templates/en/vehicle/niu-e-scooter_0.yaml

@@ -26,5 +26,5 @@ render:
       targetSoc: 80 # Until which state of charge (Soc) should the vehicle be charged (optional)
       minCurrent: 6 # The minimum amperage per connected phase with which the car should be charged (optional)
       maxCurrent: 16 # The maximum amperage per connected phase with which the car shuold be charged (optional)
-      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/docs/guides/vehicles/#erkennung-des-fahrzeugs-an-der-wallbox (optional)
+      identifiers: # Mostly this can be added later, see: https://docs.evcc.io/en/docs/guides/vehicles/#determining-which-vehicle-is-at-which-charger (optional)
       priority: # Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating pv energy (optional)