Templates update for release evcc-io/evcc@9bac4f7

templates/release/de/charger/eebus_0.yaml

@@ -8,3 +8,4 @@ render:
       type: template
       template: eebus
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/elliconnect_0.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/elliconnect_1.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/elliconnect_2.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/elliconnect_3.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/elliconnect_4.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/ellipro_0.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/ellipro_1.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/ellipro_2.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/ellipro_3.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/ellipro_4.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/fronius-wattpilot_0.yaml

@@ -0,0 +1,13 @@
+product:
+  brand: Fronius
+  description: Wattpilot
+capabilities: ["1p3p", "rfid"]
+description: |
+  Benötigt mindestens Firmware 36.3 oder neuer.
+
+render:
+  - default: |
+      type: template
+      template: fronius-wattpilot
+      host: 192.0.2.2 # IP-Adresse oder Hostname
+      password: # Passwort des Benutzerkontos (bei führenden Nullen bitte in einfache Hochkommata setzen) (optional)

templates/release/de/charger/livo_0.yaml

@@ -9,3 +9,4 @@ render:
       type: template
       template: livo
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/ocpp-abb_0.yaml

@@ -0,0 +1,20 @@
+product:
+  brand: ABB
+  description: TerraAC
+requirements: ["sponsorship"]
+render:
+  - default: |
+      type: template
+      template: ocpp-abb
+      stationid: EVB-P12354 # Station ID des Ladepunktes. Nur erforderlich wenn mehrere OCPP-Ladestationen eingerichtet sind um diese korrekt zuzuweisen. Eine einzelne OCPP-Ladestation kann auch automatisch zugeordnet werden. Hinweis: In Ausnahmefällen kann es erforderlich sein, diese ID manuell an die OCPP-URL der Ladestation in der Form ws://<evcc-adresse>:8887/<stationid> anzuhängen. Die meisten Ladestationen fügen die ID intern automatisch hinzu. (optional)
+    advanced: |
+      type: template
+      template: ocpp-abb
+      stationid: EVB-P12354 # Station ID des Ladepunktes. Nur erforderlich wenn mehrere OCPP-Ladestationen eingerichtet sind um diese korrekt zuzuweisen. Eine einzelne OCPP-Ladestation kann auch automatisch zugeordnet werden. Hinweis: In Ausnahmefällen kann es erforderlich sein, diese ID manuell an die OCPP-URL der Ladestation in der Form ws://<evcc-adresse>:8887/<stationid> anzuhängen. Die meisten Ladestationen fügen die ID intern automatisch hinzu. (optional)
+      connector: 1 # Anschlussnummer bei Ladestationen mit mehreren Anschlüssen. Die Zählung beginnt bei 1 für den ersten Anschluss. (optional)
+      remotestart: # Diese Option nur aktivieren wenn keinerlei Möglichkeit besteht Transaktionen seitens des Ladepunktes zu initiieren! Das ist nur der Fall wenn z. B. kein RFID-Lesegerät vorhanden ist und Ladevorgänge grundsätzlich einzeln per App freigeschaltet werden müssten. Normalerweise sollte der Ladepunkt am Gerät immer so konfiguriert werden, dass entweder eine RFID-Karte zur Freischaltung verwendet wird oder der Ladepunkt auf "Autostart", "Freies Laden" o.ä. eingestellt ist. Zunächst die Dokumentation und die Konfigurationsmöglichkeiten des Ladepunktes prüfen, ggf. beim Hersteller nachfragen! (optional)
+      idtag: evcc # Diese Option ist nur in Ausnahmefällen erforderlich wenn der Ladepunkt für die Annahme externer Transaktionen einen spezifischen Token erfordert. (optional)
+      connecttimeout: 5m # optional
+      timeout: 30s # optional
+      meterinterval: 10s # optional
+      metervalues: Energy.Active.Import.Register,Power.Active.Import,SoC,Current.Offered,Power.Offered,Current.Import,Voltage # optional

templates/release/de/charger/openwb-2.0_0.yaml

@@ -3,7 +3,12 @@ product:
   description: Software 2.x
 capabilities: ["1p3p", "mA"]
 description: |
-  Erfordert Software 2.x
+  Erfordert [`Software 2.x`](https://github.com/openWB/core).
+  Folgende Änderungen sind unter dem `Einstellungen`-Reiter erforderlich:
+
+  * Steuerungsmodus: `secondary`
+  * Steuerung über Modbus als secondary: `An`
+
 render:
   - default: |
       type: template

templates/release/de/charger/pmcc_0.yaml

@@ -8,3 +8,4 @@ render:
       type: template
       template: pmcc
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/charger/pmcp_0.yaml

@@ -7,3 +7,4 @@ render:
       type: template
       template: pmcp
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP-Adresse (optional)

templates/release/de/meter/growatt-hybrid_0.yaml

@@ -1,6 +1,13 @@
 product:
   brand: Growatt
   description: Hybrid Inverter
+capabilities: ["battery-control"]
+description: |
+  Um die aktive Ladesteuerung nutzen zu können ist eine einmalige manuelle Einrichtung notwendig.
+  Es müssen die Modbusregister `1100, 1101, 1102` gleichzeitig (via "write multiple", FC 16) auf die Werte `0, 5947, 0` gesetzt werden.
+  Das kann zB. mit der [Modbus CLI](https://github.com/favalex/modbus-cli) gemacht werden: `modbus [...] H@1100=0 H@1101=5947 H@1102=0`.
+  Die aktive Ladesteuerung nutzt den ersten Zeitslot für den "Battery first" modus, d.h. dieser kann nicht anderweitig genutzt werden.
+
 render:
   - usage: grid
     default: |

templates/release/de/meter/victron-energy_0.yaml

@@ -2,6 +2,8 @@ product:
   brand: Victron
   description: Energy
 capabilities: ["battery-control"]
+description: |
+  Für Grid-Nutzung ist eine VRM-Instanz notwendig wenn Lastmanagement genutzt werden soll.
 render:
   - usage: grid
     default: |
@@ -10,14 +12,14 @@ render:
       usage: grid
       host: 192.0.2.2 # IP-Adresse oder Hostname
       port: 502 # Port (optional)
-      meterid: 30 # Grid-Energiezähler VRM instance- kann im VRM Portal oder im RemoteUI ausgelesen werden. (optional)
+      meterid: # Grid-Energiezähler VRM instance- kann im VRM Portal oder im RemoteUI ausgelesen werden. (optional)
     advanced: |
       type: template
       template: victron-energy
       usage: grid
       host: 192.0.2.2 # IP-Adresse oder Hostname
       port: 502 # Port (optional)
-      meterid: 30 # Grid-Energiezähler VRM instance- kann im VRM Portal oder im RemoteUI ausgelesen werden. (optional)
+      meterid: # Grid-Energiezähler VRM instance- kann im VRM Portal oder im RemoteUI ausgelesen werden. (optional)
       minsoc: 25 # Ladung mit maximaler Geschwindigkeit bis zu dem angegeben Ladestand unabhängig PV-Erzeugung, wenn der Lademodus nicht auf 'Aus' steht (optional)
       maxsoc: # optional
   - usage: pv

templates/release/en/charger/eebus_0.yaml

@@ -8,3 +8,4 @@ render:
       type: template
       template: eebus
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/elliconnect_0.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/elliconnect_1.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/elliconnect_2.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/elliconnect_3.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/elliconnect_4.yaml

@@ -17,3 +17,4 @@ render:
       type: template
       template: elliconnect
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/ellipro_0.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/ellipro_1.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/ellipro_2.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/ellipro_3.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/ellipro_4.yaml

@@ -15,3 +15,4 @@ render:
       type: template
       template: ellipro
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/fronius-wattpilot_0.yaml

@@ -0,0 +1,13 @@
+product:
+  brand: Fronius
+  description: Wattpilot
+capabilities: ["1p3p", "rfid"]
+description: |
+  Requires firmware 36.3 or later.
+
+render:
+  - default: |
+      type: template
+      template: fronius-wattpilot
+      host: 192.0.2.2 # IP address or hostname
+      password: # Password of the user account (use single quotes in case of leading zeros) (optional)

templates/release/en/charger/livo_0.yaml

@@ -9,3 +9,4 @@ render:
       type: template
       template: livo
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/ocpp-abb_0.yaml

@@ -0,0 +1,20 @@
+product:
+  brand: ABB
+  description: TerraAC
+requirements: ["sponsorship"]
+render:
+  - default: |
+      type: template
+      template: ocpp-abb
+      stationid: EVB-P12354 # Station ID of the charging point. Only required if multiple OCPP charging stations are set up to assign them correctly. A single OCPP charging station can also be automatically assigned. Note: In exceptional cases, it may be necessary to manually append this ID to the OCPP URL of the charging station in the form ws://<evcc-address>:8887/<stationid>. Most charging stations automatically add the ID internally. (optional)
+    advanced: |
+      type: template
+      template: ocpp-abb
+      stationid: EVB-P12354 # Station ID of the charging point. Only required if multiple OCPP charging stations are set up to assign them correctly. A single OCPP charging station can also be automatically assigned. Note: In exceptional cases, it may be necessary to manually append this ID to the OCPP URL of the charging station in the form ws://<evcc-address>:8887/<stationid>. Most charging stations automatically add the ID internally. (optional)
+      connector: 1 # Connector number for charging stations with multiple connectors. Counting starts at 1 for the first connector. (optional)
+      remotestart: # Only enable this option if there is no way to initiate transactions from the charger side! This is only the case if e.g. no RFID reader is available and charging processes would have to be released individually via app. Normally, the charger should always be configured at the device so that either an RFID card is used for activation or the charger is set to "Autostart", "Free Charging" or similar. First check the documentation and configuration possibilities of the charger, ask the manufacturer if necessary! (optional)
+      idtag: evcc # This option is only required in exceptional cases if the charger requires a specific token for accepting external transactions. (optional)
+      connecttimeout: 5m # optional
+      timeout: 30s # optional
+      meterinterval: 10s # optional
+      metervalues: Energy.Active.Import.Register,Power.Active.Import,SoC,Current.Offered,Power.Offered,Current.Import,Voltage # optional

templates/release/en/charger/openwb-2.0_0.yaml

@@ -3,7 +3,12 @@ product:
   description: Software 2.x
 capabilities: ["1p3p", "mA"]
 description: |
-  Requires software 2.x
+  Requires [`Software 2.x`](https://github.com/openWB/core).
+  The following changes are necessary under the 'Einstellungen' tab:
+
+  * Steuerungsmodus: `secondary`
+  * Steuerung über Modbus als secondary: `An`
+
 render:
   - default: |
       type: template

templates/release/en/charger/pmcc_0.yaml

@@ -8,3 +8,4 @@ render:
       type: template
       template: pmcc
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/charger/pmcp_0.yaml

@@ -7,3 +7,4 @@ render:
       type: template
       template: pmcp
       ski: # SKI (Subject Key Identifier)
+      ip: 192.0.2.2 # IP address (optional)

templates/release/en/meter/growatt-hybrid_0.yaml

@@ -1,6 +1,13 @@
 product:
   brand: Growatt
   description: Hybrid Inverter
+capabilities: ["battery-control"]
+description: |
+  To use the active battery control, a one-time manual setup is necessary.
+  The modbus registers `1100, 1101, 1102` need to be set to the values `0, 5947, 0` at the same time (via "write multiple", FC 16).
+  This can be done by e.g. using the [Modbus CLI](https://github.com/favalex/modbus-cli): `modbus [...] H@1100=0 H@1101=5947 H@1102=0`.
+  The active battery control uses the first "Battery first" timeslot, so it cannot be used otherwise.
+
 render:
   - usage: grid
     default: |

templates/release/en/meter/victron-energy_0.yaml

@@ -2,6 +2,8 @@ product:
   brand: Victron
   description: Energy
 capabilities: ["battery-control"]
+description: |
+  For grid usage, a grid meter VRM instance is require to enabled load management.
 render:
   - usage: grid
     default: |
@@ -10,14 +12,14 @@ render:
       usage: grid
       host: 192.0.2.2 # IP address or hostname
       port: 502 # Port (optional)
-      meterid: 30 # Grid-Meter VRM instance- can be read out in VRM portal or via remoteUI. (optional)
+      meterid: # Grid meter VRM instance- can be read out in VRM portal or via remoteUI. (optional)
     advanced: |
       type: template
       template: victron-energy
       usage: grid
       host: 192.0.2.2 # IP address or hostname
       port: 502 # Port (optional)
-      meterid: 30 # Grid-Meter VRM instance- can be read out in VRM portal or via remoteUI. (optional)
+      meterid: # Grid meter VRM instance- can be read out in VRM portal or via remoteUI. (optional)
       minsoc: 25 # Immediate charging with maximum power up to the defined state of charge independently from solar production if the charge mode is not set to 'Off' (optional)
       maxsoc: # optional
   - usage: pv