wireguard: netlink: send staged packets when setting initial private key

commit f58d0a9b4c6a7a5199c3af967e43cc8b654604d4 upstream.

Packets bound for peers can queue up prior to the device private key
being set. For example, if persistent keepalive is set, a packet is
queued up to be sent as soon as the device comes up. However, if the
private key hasn't been set yet, the handshake message never sends, and
no timer is armed to retry, since that would be pointless.

But, if a user later sets a private key, the expectation is that those
queued packets, such as a persistent keepalive, are actually sent. So
adjust the configuration logic to account for this edge case, and add a
test case to make sure this works.

Maxim noticed this with a wg-quick(8) config to the tune of:

    [Interface]
    PostUp = wg set %i private-key somefile

    [Peer]
    PublicKey = ...
    Endpoint = ...
    PersistentKeepalive = 25

Here, the private key gets set after the device comes up using a PostUp
script, triggering the bug.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Cc: [email protected]
Reported-by: Maxim Cournoyer <[email protected]>
Tested-by: Maxim Cournoyer <[email protected]>
Link: https://lore.kernel.org/wireguard/[email protected]/
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: engstk <[email protected]>

drivers/net/wireguard/netlink.c

@@ -546,6 +546,7 @@ static int wg_set_device(struct sk_buff *skb, struct genl_info *info)
 		u8 *private_key = nla_data(info->attrs[WGDEVICE_A_PRIVATE_KEY]);
 		u8 public_key[NOISE_PUBLIC_KEY_LEN];
 		struct wg_peer *peer, *temp;
+		bool send_staged_packets;
 
 		if (!crypto_memneq(wg->static_identity.static_private,
 				   private_key, NOISE_PUBLIC_KEY_LEN))
@@ -564,14 +565,17 @@ static int wg_set_device(struct sk_buff *skb, struct genl_info *info)
 		}
 
 		down_write(&wg->static_identity.lock);
-		wg_noise_set_static_identity_private_key(&wg->static_identity,
-							 private_key);
-		list_for_each_entry_safe(peer, temp, &wg->peer_list,
-					 peer_list) {
+		send_staged_packets = !wg->static_identity.has_identity && netif_running(wg->dev);
+		wg_noise_set_static_identity_private_key(&wg->static_identity, private_key);
+		send_staged_packets = send_staged_packets && wg->static_identity.has_identity;
+
+		wg_cookie_checker_precompute_device_keys(&wg->cookie_checker);
+		list_for_each_entry_safe(peer, temp, &wg->peer_list, peer_list) {
 			wg_noise_precompute_static_static(peer);
 			wg_noise_expire_current_peer_keypairs(peer);
+			if (send_staged_packets)
+				wg_packet_send_staged_packets(peer);
 		}
-		wg_cookie_checker_precompute_device_keys(&wg->cookie_checker);
 		up_write(&wg->static_identity.lock);
 	}
 skip_set_private_key:

tools/testing/selftests/wireguard/netns.sh

@@ -502,10 +502,32 @@ n2 bash -c 'printf 0 > /proc/sys/net/ipv4/conf/all/rp_filter'
 n1 ping -W 1 -c 1 192.168.241.2
 [[ $(n2 wg show wg0 endpoints) == "$pub1	10.0.0.3:1" ]]
 
-ip1 link del veth1
-ip1 link del veth3
-ip1 link del wg0
-ip2 link del wg0
+ip1 link del dev veth3
+ip1 link del dev wg0
+ip2 link del dev wg0
+
+# Make sure persistent keep alives are sent when an adapter comes up
+ip1 link add dev wg0 type wireguard
+n1 wg set wg0 private-key <(echo "$key1") peer "$pub2" endpoint 10.0.0.1:1 persistent-keepalive 1
+read _ _ tx_bytes < <(n1 wg show wg0 transfer)
+[[ $tx_bytes -eq 0 ]]
+ip1 link set dev wg0 up
+read _ _ tx_bytes < <(n1 wg show wg0 transfer)
+[[ $tx_bytes -gt 0 ]]
+ip1 link del dev wg0
+# This should also happen even if the private key is set later
+ip1 link add dev wg0 type wireguard
+n1 wg set wg0 peer "$pub2" endpoint 10.0.0.1:1 persistent-keepalive 1
+read _ _ tx_bytes < <(n1 wg show wg0 transfer)
+[[ $tx_bytes -eq 0 ]]
+ip1 link set dev wg0 up
+read _ _ tx_bytes < <(n1 wg show wg0 transfer)
+[[ $tx_bytes -eq 0 ]]
+n1 wg set wg0 private-key <(echo "$key1")
+read _ _ tx_bytes < <(n1 wg show wg0 transfer)
+[[ $tx_bytes -gt 0 ]]
+ip1 link del dev veth1
+ip1 link del dev wg0
 
 # We test that Netlink/IPC is working properly by doing things that usually cause split responses
 ip0 link add dev wg0 type wireguard