Migrate to zlib-ng, part 3: Remove zlib and zlib-intel source code and license mentions

THIRD-PARTY-NOTICES.TXT

@@ -66,38 +66,6 @@ shall not be used in advertising or otherwise to promote the sale,
 use or other dealings in these Data Files or Software without prior
 written authorization of the copyright holder.
 
-License notice for Zlib
------------------------
-
-https://github.com/madler/zlib
-https://zlib.net/zlib_license.html
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.3.1, January 22nd, 2024
-
-  Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  [email protected]          [email protected]
-
-*/
-
 License notice for zlib-ng
 -----------------------
 

docs/workflow/requirements/linux-requirements.md

@@ -47,15 +47,14 @@ Install the following packages for the toolchain:
 * liblttng-ust-dev
 * libssl-dev
 * libkrb5-dev
-* zlib1g-dev
 * ninja-build (optional, enables building native code with ninja instead of make)
 
 **NOTE**: If you have an Ubuntu version older than 22.04 LTS, or Debian version older than 12, don't install `cmake` using `apt` directly. Follow the note written down below.
 
 ```bash
 sudo apt install -y cmake llvm lld clang build-essential \
-  python-is-python3 curl git lldb libicu-dev liblttng-ust-dev \
-  libssl-dev libkrb5-dev zlib1g-dev ninja-build
+python-is-python3 curl git lldb libicu-dev liblttng-ust-dev \
+libssl-dev libkrb5-dev ninja-build
 ```
 
 **NOTE**: As of now, Ubuntu's `apt` only has until CMake version 3.16.3 if you're using Ubuntu 20.04 LTS (less in older Ubuntu versions), and version 3.18.4 in Debian 11 (less in older Debian versions). This is lower than the required 3.20, which in turn makes it incompatible with the repo. For this case, we can use the `snap` package manager or the _Kitware APT feed_ to get a new enough version of CMake.
@@ -98,13 +97,12 @@ Install the following packages for the toolchain:
 * libicu-devel
 * openssl-devel
 * krb5-devel
-* zlib-devel
 * lttng-ust-devel
 * ninja-build (optional, enables building native code with ninja instead of make)
 
 ```bash
 sudo dnf install -y cmake llvm lld lldb clang python curl git libicu-devel openssl-devel \
-  krb5-devel zlib-devel lttng-ust-devel ninja-build
+  krb5-devel lttng-ust-devel ninja-build
 ```
 
 ### Gentoo

eng/install-native-dependencies.sh

@@ -24,13 +24,13 @@ case "$os" in
             apt update
 
             apt install -y build-essential gettext locales cmake llvm clang lldb liblldb-dev libunwind8-dev libicu-dev liblttng-ust-dev \
-                libssl-dev libkrb5-dev zlib1g-dev
+                libssl-dev libkrb5-dev
 
             localedef -i en_US -c -f UTF-8 -A /usr/share/locale/locale.alias en_US.UTF-8
         elif [ "$ID" = "fedora" ]; then
-            dnf install -y cmake llvm lld lldb clang python curl libicu-devel openssl-devel krb5-devel zlib-devel lttng-ust-devel
+            dnf install -y cmake llvm lld lldb clang python curl libicu-devel openssl-devel krb5-devel lttng-ust-devel
         elif [ "$ID" = "alpine" ]; then
-            apk add build-base cmake bash curl clang llvm-dev krb5-dev lttng-ust-dev icu-dev zlib-dev openssl-dev
+            apk add build-base cmake bash curl clang llvm-dev krb5-dev lttng-ust-dev icu-dev openssl-dev
         else
             echo "Unsupported distro. distro: $ID"
             exit 1

src/installer/pkg/THIRD-PARTY-NOTICES.TXT

@@ -65,38 +65,6 @@ shall not be used in advertising or otherwise to promote the sale,
 use or other dealings in these Data Files or Software without prior
 written authorization of the copyright holder.
 
-License notice for Zlib
------------------------
-
-https://github.com/madler/zlib
-https://zlib.net/zlib_license.html
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.13, October 13th, 2022
-
-  Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  [email protected]          [email protected]
-
-*/
-
 License notice for Mono
 -------------------------------
 

src/native/external/cgmanifest.json

@@ -41,26 +41,6 @@
       },
       "DevelopmentDependency": false
     },
-    {
-      "Component": {
-        "Type": "git",
-        "Git": {
-          "RepositoryUrl": "https://github.com/madler/zlib",
-          "CommitHash": "51b7f2abdade71cd9bb0e7a373ef2610ec6f9daf"
-        }
-      },
-      "DevelopmentDependency": false
-    },
-    {
-      "Component": {
-        "Type": "git",
-        "Git": {
-          "RepositoryUrl": "https://github.com/intel/zlib",
-          "CommitHash": "6160a8f20c3626aec2f8b0fda5bf2e65bfe31781"
-        }
-      },
-      "DevelopmentDependency": false
-    },
     {
       "Component": {
         "Type": "git",