Nightscout Web Monitor (a.k.a. cgm-remote-monitor)

This acts as a web-based CGM (Continuous Glucose Monitor) to allow multiple caregivers to remotely view a patient's glucose data in real time. The server reads a MongoDB which is intended to be data from a physical CGM, where it sends new SGV (sensor glucose values) as the data becomes available. The data is then displayed graphically and blood glucose values are predicted 0.5 hours ahead using an autoregressive second order model. Alarms are generated for high and low values, which can be cleared by any watcher of the data.

#WeAreNotWaiting and this is why.

Community maintained fork of the original cgm-remote-monitor.

Table of Contents

Install
Usage

Install

Supported configurations:

If you plan to use Nightscout, we recommend using Heroku, as Nightscout can reach the usage limits of the free Azure plan and cause it to shut down for hours or days. If you end up needing a paid tier, the $7/mo Heroku plan is also much cheaper than the first paid tier of Azure. Currently, the only added benefit to choosing the $7/mo Heroku plan vs the free Heroku plan is a section showing site use metrics for performance (such as response time). This has limited benefit to the average Nightscout user. In short, Heroku is the free and best option for Nightscout hosting.

[Nightscout Setup with Heroku] (http://openaps.readthedocs.io/en/latest/docs/While%20You%20Wait%20For%20Gear/nightscout-setup.html#nightscout-setup-with-heroku) (recommended)
[Nightscout Setup with Microsoft Azure] (http://www.nightscout.info/wiki/faqs-2/azure-2) (not recommended, please switch from Azure to Heroku )
Linux based install (Debian, Ubuntu, Raspbian) install with own Node.JS and MongoDB install (see software requirements below)
Windows based install with own Node.JS and MongoDB install (see software requirements below)

Software requirements:

Node.js Latest Node 8 LTS (Node 8.11.3 or later). Use Install instructions for Node or use setup.sh)
MongoDB 3.x or later. MongoDB 2.4 is only supported for Raspberry Pi.

As a non-root user clone this repo then install dependencies into the root of the project:

$ npm install

Installation notes for Microsoft Azure, Windows and Node 10:

If deploying the software to Microsoft Azure, you must set ** in the app settings for WEBSITE_NODE_DEFAULT_VERSION and SCM_COMMAND_IDLE_TIMEOUT before you deploy the latest Nightscout or the site deployment will likely fail. Other hosting environments do not require this setting. Please use:

WEBSITE_NODE_DEFAULT_VERSION=8.11.1
SCM_COMMAND_IDLE_TIMEOUT=300

See install MongoDB, Node.js, and Nightscouton a single Windows system. if you want to host your Nightscout outside of the cloud. Although the instructions are intended for Windows Server the procedure is compatible with client versions of Windows such as Windows 7 and Windows 10.
If you deploy to Windows and want to develop or test you need to install [Cygwin] (https://www.cygwin.com/) (use [setup-x86_64.exe] (https://www.cygwin.com/setup-x86_64.exe) and make sure to install build-essential package. Test your configuration by executing make and check if all tests are ok.
There may be some issues with Node 10.6.0 or later with Nightscout. Node 10 support will be in the 0.11 release. Please don't use Nightscout with (Node 9 or) Node 10 at this moment.

Usage

The data being uploaded from the server to the client is from a MongoDB server such as mongolab.

Updating my version?

The easiest way to update your version of cgm-remote-monitor to our latest recommended version is to use the update my fork tool. It even gives out stars if you are up to date.

What is my mongo string?

Try the what is my mongo string tool to get a good idea of your mongo string. You can copy and paste the text in the gray box into your MONGO_CONNECTION environment variable.

Configure my uploader to match

Use the autoconfigure tool to sync an uploader to your config.

Nightscout API

The Nightscout API enables direct access to your DData without the need for direct Mongo access. You can find CGM data in /api/v1/entries, Care Portal Treatments in /api/v1/treatments, and Treatment Profiles in /api/v1/profile. The server status and settings are available from /api/v1/status.json.

By default the /entries and /treatments APIs limit results to the the most recent 10 values from the last 2 days. You can get many more results, by using the count, date, dateString, and created_at parameters, depending on the type of data you're looking for.

Example Queries

(replace http://localhost:1337 with your base url, YOUR-SITE)

100's: http://localhost:1337/api/v1/entries.json?find[sgv]=100
Count of 100's in a month: http://localhost:1337/api/v1/count/entries/where?find[dateString][$gte]=2016-09&find[dateString][$lte]=2016-10&find[sgv]=100
BGs between 2 days: http://localhost:1337/api/v1/entries/sgv.json?find[dateString][$gte]=2015-08-28&find[dateString][$lte]=2015-08-30
Juice Box corrections in a year: http://localhost:1337/api/v1/treatments.json?count=1000&find[carbs]=15&find[eventType]=Carb+Correction&find[created_at][$gte]=2015
Boluses over 2U: http://localhost:1337/api/v1/treatments.json?find[insulin][$gte]=2

The API is Swagger enabled, so you can generate client code to make working with the API easy. To learn more about the Nightscout API, visit https://YOUR-SITE.com/api-docs.html or review swagger.yaml.

Environment

VARIABLE (default) - description

Required

MONGO_CONNECTION - Your mongo uri, for example: mongodb://sally:[email protected]:99999/nightscout
DISPLAY_UNITS (mg/dl) - Choices: mg/dl and mmol. Setting to mmol puts the entire server into mmol mode by default, no further settings needed.
BASE_URL - Used for building links to your sites api, ie pushover callbacks, usually the URL of your Nightscout site you may want https instead of http

Features/Labs

ENABLE - Used to enable optional features, expects a space delimited list, such as: careportal rawbg iob, see plugins below
DISABLE - Used to disable default features, expects a space delimited list, such as: direction upbat, see plugins below
API_SECRET - A secret passphrase that must be at least 12 characters long, required to enable POST and PUT; also required for the Care Portal
AUTH_DEFAULT_ROLES (readable) - possible values readable, denied, or any valid role name. When readable, anyone can view Nightscout without a token. Setting it to denied will require a token from every visit, using status-only will enable api-secret based login.
IMPORT_CONFIG - Used to import settings and extended settings from a url such as a gist. Structure of file should be something like: {"settings": {"theme": "colors"}, "extendedSettings": {"upbat": {"enableAlerts": true}}}
TREATMENTS_AUTH (on) - possible values on or off. Deprecated, if set to off the careportal role will be added to AUTH_DEFAULT_ROLES

Alarms

These alarm setting effect all delivery methods (browser, pushover, maker, etc), some settings can be overridden per client (web browser)

ALARM_TYPES (simple if any BG_* ENV's are set, otherwise predict) - currently 2 alarm types are supported, and can be used independently or combined. The simple alarm type only compares the current BG to BG_ thresholds above, the predict alarm type uses highly tuned formula that forecasts where the BG is going based on it's trend. predict DOES NOT currently use any of the BG_* ENV's
BG_HIGH (260) - must be set using mg/dl units; the high BG outside the target range that is considered urgent
BG_TARGET_TOP (180) - must be set using mg/dl units; the top of the target range, also used to draw the line on the chart
BG_TARGET_BOTTOM (80) - must be set using mg/dl units; the bottom of the target range, also used to draw the line on the chart
BG_LOW (55) - must be set using mg/dl units; the low BG outside the target range that is considered urgent
ALARM_URGENT_HIGH (on) - possible values on or off
ALARM_URGENT_HIGH_MINS (30 60 90 120) - Number of minutes to snooze urgent high alarms, space separated for options in browser, first used for pushover
ALARM_HIGH (on) - possible values on or off
ALARM_HIGH_MINS (30 60 90 120) - Number of minutes to snooze high alarms, space separated for options in browser, first used for pushover
ALARM_LOW (on) - possible values on or off
ALARM_LOW_MINS (15 30 45 60) - Number of minutes to snooze low alarms, space separated for options in browser, first used for pushover
ALARM_URGENT_LOW (on) - possible values on or off
ALARM_URGENT_LOW_MINS (15 30 45) - Number of minutes to snooze urgent low alarms, space separated for options in browser, first used for pushover
ALARM_URGENT_MINS (30 60 90 120) - Number of minutes to snooze urgent alarms (that aren't tagged as high or low), space separated for options in browser, first used for pushover
ALARM_WARN_MINS (30 60 90 120) - Number of minutes to snooze warning alarms (that aren't tagged as high or low), space separated for options in browser, first used for pushover

Core

MONGO_COLLECTION (entries) - The collection used to store SGV, MBG, and CAL records from your CGM device
MONGO_TREATMENTS_COLLECTION (treatments) -The collection used to store treatments entered in the Care Portal, see the ENABLE env var above
MONGO_DEVICESTATUS_COLLECTION(devicestatus) - The collection used to store device status information such as uploader battery
MONGO_PROFILE_COLLECTION(profile) - The collection used to store your profiles
MONGO_FOOD_COLLECTION(food) - The collection used to store your food database
MONGO_ACTIVITY_COLLECTION(activity) - The collection used to store activity data
PORT (1337) - The port that the node.js application will listen on.
HOSTNAME - The hostname that the node.js application will listen on, null by default for any hostname for IPv6 you may need to use ::.
SSL_KEY - Path to your ssl key file, so that ssl(https) can be enabled directly in node.js
SSL_CERT - Path to your ssl cert file, so that ssl(https) can be enabled directly in node.js
SSL_CA - Path to your ssl ca file, so that ssl(https) can be enabled directly in node.js
HEARTBEAT (60) - Number of seconds to wait in between database checks
DEBUG_MINIFY (true) - Debug option, setting to false will disable bundle minification to help tracking down error and speed up development

Predefined values for your browser settings (optional)

TIME_FORMAT (12)- possible values 12 or 24
NIGHT_MODE (off) - possible values on or off
SHOW_RAWBG (never) - possible values always, never or noise
CUSTOM_TITLE (Nightscout) - Usually name of T1
THEME (default) - possible values default, colors, or colorblindfriendly
ALARM_TIMEAGO_WARN (on) - possible values on or off
ALARM_TIMEAGO_WARN_MINS (15) - minutes since the last reading to trigger a warning
ALARM_TIMEAGO_URGENT (on) - possible values on or off
ALARM_TIMEAGO_URGENT_MINS (30) - minutes since the last reading to trigger a urgent alarm
SHOW_PLUGINS - enabled plugins that should have their visualizations shown, defaults to all enabled
SHOW_FORECAST (ar2) - plugin forecasts that should be shown by default, supports space delimited values such as "ar2 openaps"
LANGUAGE (en) - language of Nightscout. If not available english is used
- Currently supported language codes are: bg (Български), cs (Čeština), de (Deutsch), dk (Dansk), el (Ελληνικά), en (English), es (Español), fi (Suomi), fr (Français), he (עברית), hr (Hrvatski), it (Italiano), ko (한국어), nb (Norsk (Bokmål)), nl (Nederlands), pl (Polski), pt (Português (Brasil)), ro (Română), ru (Русский), sk (Slovenčina), sv (Svenska), zh_cn (中文（简体)), zh_tw (中文（繁體))
SCALE_Y (log) - The type of scaling used for the Y axis of the charts system wide.
- The default log (logarithmic) option will let you see more detail towards the lower range, while still showing the full CGM range.
- The linear option has equidistant tick marks, the range used is dynamic so that space at the top of chart isn't wasted.
- The log-dynamic is similar to the default log options, but uses the same dynamic range and the linear scale.
EDIT_MODE (on) - possible values on or off. Enable or disable icon allowing enter treatments edit mode

Views

There are a few alternate web views available that display a simplified BG stream. Append any of these to your Nightscout URL:

/clock.html - Shows current BG. Grey text on a black background.
/bgclock.html - Shows current BG, trend arrow, and time of day. Grey text on a black background.
/clock-color.html - Shows current BG and trend arrow. White text on a background that changes color to indicate current BG threshold (green = in range; blue = below range; yellow = above range; red = urgent below/above).

Plugins

Plugins are used extend the way information is displayed, how notifications are sent, alarms are triggered, and more.

The built-in/example plugins that are available by default are listed below. The plugins may still need to be enabled by adding to the ENABLE environment variable.

Default Plugins

These can be disabled by setting the DISABLE env var, for example DISABLE="direction upbat"

`delta` (BG Delta)

Calculates and displays the change between the last 2 BG values.

`direction` (BG Direction)

Displays the trend direction.

`upbat` (Uploader Battery)

Displays the most recent battery status from the uploader phone. . Use these extended setting to adjust behavior:

UPBAT_ENABLE_ALERTS (false) - Set to true to enable uploader battery alarms via Pushover and IFTTT.
UPBAT_WARN (30) - Minimum battery percent to trigger warning.
UPBAT_URGENT (20) - Minimum battery percent to trigger urgent alarm.

`timeago` (Time Ago)

Displays the time since last CGM entry. Use these extended setting to adjust behavior:

TIMEAGO_ENABLE_ALERTS (false) - Set to true to enable stale data alarms via Pushover and IFTTT.
ALARM_TIMEAGO_WARN (on) - possible values on or off
ALARM_TIMEAGO_WARN_MINS (15) - minutes since the last reading to trigger a warning
ALARM_TIMEAGO_URGENT (on) - possible values on or off
ALARM_TIMEAGO_URGENT_MINS (30) - minutes since the last reading to trigger a urgent alarm

`devicestatus` (Device Status)

Used by upbat and other plugins to display device status info. Supports the DEVICESTATUS_ADVANCED="true" extended setting to send all device statuses to the client for retrospective use and to support other plugins.

`errorcodes` (CGM Error Codes)

Generates alarms for CGM codes 9 (hourglass) and 10 (???).

Use extended settings to adjust what errorcodes trigger notifications and alarms:
- ERRORCODES_INFO (1 2 3 4 5 6 7 8) - By default the needs calibration (blood drop) and other codes below 9 generate an info level notification, set to a space separate list of number or off to disable
- ERRORCODES_WARN (off) - By default there are no warning configured, set to a space separate list of numbers or off to disable
- ERRORCODES_URGENT (9 10) - By default the hourglass and ??? generate an urgent alarm, set to a space separate list of numbers or off to disable

`ar2` (AR2 Forecasting)

Generates alarms based on forecasted values. See Forecasting using AR2 algorithm

Enabled by default if no thresholds are set OR ALARM_TYPES includes predict.
Use extended settings to adjust AR2 behavior:
- AR2_CONE_FACTOR (2) - to adjust size of cone, use 0 for a single line.

`simplealarms` (Simple BG Alarms)

Uses BG_HIGH, BG_TARGET_TOP, BG_TARGET_BOTTOM, BG_LOW thresholds to generate alarms.

Enabled by default if 1 of these thresholds is set OR ALARM_TYPES includes simple.

`profile` (Treatment Profile)

Add link to Profile Editor and allow to enter treatment profile settings. Also uses the extended setting:

PROFILE_HISTORY (off) - possible values on or off. Enable/disable NS ability to keep history of your profiles (still experimental)
PROFILE_MULTIPLE (off) - possible values on or off. Enable/disable NS ability to handle and switch between multiple treatment profiles

Advanced Plugins:

`careportal` (Careportal)

An optional form to enter treatments.

`boluscalc` (Bolus Wizard)

`food` (Custom Foods)

An option plugin to enable adding foods from database in Bolus Wizard and enable .

`rawbg` (Raw BG)

Calculates BG using sensor and calibration records from and displays an alternate BG values and noise levels.

`iob` (Insulin-on-Board)

Adds the IOB pill visualization in the client and calculates values that used by other plugins. Uses treatments with insulin doses and the dia and sens fields from the treatment profile.

`cob` (Carbs-on-Board)

Adds the COB pill visualization in the client and calculates values that used by other plugins. Uses treatments with carb doses and the carbs_hr, carbratio, and sens fields from the treatment profile.

`bwp` (Bolus Wizard Preview)

This plugin in intended for the purpose of automatically snoozing alarms when the CGM indicates high blood sugar but there is also insulin on board (IOB) and secondly, alerting to user that it might be beneficial to measure the blood sugar using a glucometer and dosing insulin as calculated by the pump or instructed by trained medicare professionals. The values provided by the plugin are provided as a reference based on CGM data and insulin sensitivity you have configured, and are not intended to be used as a reference for bolus calculation. The plugin calculates the bolus amount when above your target, generates alarms when you should consider checking and bolusing, and snoozes alarms when there is enough IOB to cover a high BG. Uses the results of the iob plugin and sens, target_high, and target_low fields from the treatment profile. Defaults that can be adjusted with extended setting

BWP_WARN (0.50) - If BWP is > BWP_WARN a warning alarm will be triggered.
BWP_URGENT (1.00) - If BWP is > BWP_URGENT an urgent alarm will be triggered.
BWP_SNOOZE_MINS (10) - minutes to snooze when there is enough IOB to cover a high BG.
BWP_SNOOZE - (0.10) If BG is higher then the target_high and BWP < BWP_SNOOZE alarms will be snoozed for BWP_SNOOZE_MINS.

`cage` (Cannula Age)

Calculates the number of hours since the last Site Change treatment that was recorded.

CAGE_ENABLE_ALERTS (false) - Set to true to enable notifications to remind you of upcoming cannula change.
CAGE_INFO (44) - If time since last Site Change matches CAGE_INFO, user will be warned of upcoming cannula change
CAGE_WARN (48) - If time since last Site Change matches CAGE_WARN, user will be alarmed to to change the cannula
CAGE_URGENT (72) - If time since last Site Change matches CAGE_URGENT, user will be issued a persistent warning of overdue change.
CAGE_DISPLAY (hours) - Possible values are 'hours' or 'days'. If 'days' is selected and age of canula is greater than 24h number is displayed in days and hours

`sage` (Sensor Age)

Calculates the number of days and hours since the last Sensor Start and Sensor Change treatment that was recorded.

SAGE_ENABLE_ALERTS (false) - Set to true to enable notifications to remind you of upcoming sensor change.
SAGE_INFO (144) - If time since last sensor event matches SAGE_INFO, user will be warned of upcoming sensor change
SAGE_WARN (164) - If time since last sensor event matches SAGE_WARN, user will be alarmed to to change/restart the sensor
SAGE_URGENT (166) - If time since last sensor event matches SAGE_URGENT, user will be issued a persistent warning of overdue change.

`iage` (Insulin Age)

Calculates the number of days and hours since the last Insulin Change treatment that was recorded.

IAGE_ENABLE_ALERTS (false) - Set to true to enable notifications to remind you of upcoming insulin reservoir change.
IAGE_INFO (44) - If time since last Insulin Change matches IAGE_INFO, user will be warned of upcoming insulin reservoir change
IAGE_WARN (48) - If time since last Insulin Change matches IAGE_WARN, user will be alarmed to to change the insulin reservoir
IAGE_URGENT (72) - If time since last Insulin Change matches IAGE_URGENT, user will be issued a persistent warning of overdue change.

`treatmentnotify` (Treatment Notifications)

Generates notifications when a treatment has been entered and snoozes alarms minutes after a treatment. Default snooze is 10 minutes, and can be set using the TREATMENTNOTIFY_SNOOZE_MINS extended setting.

`basal` (Basal Profile)

Adds the Basal pill visualization to display the basal rate for the current time. Also enables the bwp plugin to calculate correction temp basal suggestions. Uses the basal field from the treatment profile. Also uses the extended setting:

BASAL_RENDER (none) - Possible values are none, default, or icicle (inverted)

`bridge` (Share2Nightscout bridge)

Glucose reading directly from the Share service, uses these extended settings:

BRIDGE_USER_NAME - Your user name for the Share service.
BRIDGE_PASSWORD - Your password for the Share service.
BRIDGE_INTERVAL (150000 2.5 minutes) - The time to wait between each update.
BRIDGE_MAX_COUNT (1) - The maximum number of records to fetch per update.
BRIDGE_FIRST_FETCH_COUNT (3) - Changes max count during the very first update only.
BRIDGE_MAX_FAILURES (3) - How many failures before giving up.
BRIDGE_MINUTES (1400) - The time window to search for new data per update (default is one day in minutes).

`mmconnect` (MiniMed Connect bridge)

Transfer real-time MiniMed Connect data from the Medtronic CareLink server into Nightscout (read more)

MMCONNECT_USER_NAME - Your user name for CareLink Connect.
MMCONNECT_PASSWORD - Your password for CareLink Connect.
MMCONNECT_INTERVAL (60000 1 minute) - Number of milliseconds to wait between requests to the CareLink server.
MMCONNECT_MAX_RETRY_DURATION (32) - Maximum number of total seconds to spend retrying failed requests before giving up.
MMCONNECT_SGV_LIMIT (24) - Maximum number of recent sensor glucose values to send to Nightscout on each request.
MMCONNECT_VERBOSE - Set this to "true" to log CareLink request information to the console.
MMCONNECT_STORE_RAW_DATA - Set this to "true" to store raw data returned from CareLink as type: "carelink_raw" database entries (useful for development).

`pump` (Pump Monitoring)

Generic Pump Monitoring for OpenAPS, MiniMed Connect, RileyLink, t:slim, with more on the way

Requires DEVICESTATUS_ADVANCED="true" to be set
PUMP_ENABLE_ALERTS (false) - Set to true to enable notifications for Pump battery and reservoir.
PUMP_WARN_ON_SUSPEND (false) - Set to true to get an alarm when the pump is suspended.
PUMP_FIELDS (reservoir battery) - The fields to display by default. Any of the following fields: reservoir, battery, clock, status, and device
PUMP_RETRO_FIELDS (reservoir battery clock) - The fields to display in retro mode. Any of the above fields.
PUMP_WARN_CLOCK (30) - The number of minutes ago that needs to be exceed before an alert is triggered.
PUMP_URGENT_CLOCK (60) - The number of minutes ago that needs to be exceed before an urgent alarm is triggered.
PUMP_WARN_RES (10) - The number of units remaining, a warning will be triggered when dropping below this threshold.
PUMP_URGENT_RES (5) - The number of units remaining, an urgent alarm will be triggered when dropping below this threshold.
PUMP_WARN_BATT_P (30) - The % of the pump battery remaining, a warning will be triggered when dropping below this threshold.
PUMP_URGENT_BATT_P (20) - The % of the pump battery remaining, an urgent alarm will be triggered when dropping below this threshold.
PUMP_WARN_BATT_V (1.35) - The voltage (if percent isn't available) of the pump battery, a warning will be triggered when dropping below this threshold.
PUMP_URGENT_BATT_V (1.30) - The voltage (if percent isn't available) of the pump battery, an urgent alarm will be triggered when dropping below this threshold.

`openaps` (OpenAPS)

Integrated OpenAPS loop monitoring, uses these extended settings:

Requires DEVICESTATUS_ADVANCED="true" to be set
OPENAPS_ENABLE_ALERTS (false) - Set to true to enable notifications when OpenAPS isn't looping. If OpenAPS is going to offline for a period of time, you can add an OpenAPS Offline event for the expected duration from Careportal to avoid getting alerts.
OPENAPS_WARN (30) - The number of minutes since the last loop that needs to be exceed before an alert is triggered
OPENAPS_URGENT (60) - The number of minutes since the last loop that needs to be exceed before an urgent alarm is triggered
OPENAPS_FIELDS (status-symbol status-label iob meal-assist rssi) - The fields to display by default. Any of the following fields: status-symbol, status-label, iob, meal-assist, freq, and rssi
OPENAPS_RETRO_FIELDS (status-symbol status-label iob meal-assist rssi) - The fields to display in retro mode. Any of the above fields.

Also see Pushover and IFTTT Maker.

`loop` (Loop)

iOS Loop app monitoring, uses these extended settings:

Requires DEVICESTATUS_ADVANCED="true" to be set
LOOP_ENABLE_ALERTS (false) - Set to true to enable notifications when Loop isn't looping.
LOOP_WARN (30) - The number of minutes since the last loop that needs to be exceeded before an alert is triggered
LOOP_URGENT (60) - The number of minutes since the last loop that needs to be exceeded before an urgent alarm is triggered
Add loop to SHOW_FORECAST to show forecasted BG.

`xdrip-js` (xDrip-js)

Integrated xDrip-js monitoring, uses these extended settings:

Requires DEVICESTATUS_ADVANCED="true" to be set
XDRIP-JS_ENABLE_ALERTS (false) - Set to true to enable notifications when CGM state is not OK or battery voltages fall below threshold.
XDRIP-JS_STATE_NOTIFY_INTRVL (0.5) - Set to number of hours between CGM state notifications
XDRIP-JS_WARN_BAT_V (300) - The voltage of either transmitter battery, a warning will be triggered when dropping below this threshold.

`alexa` (Amazon Alexa)

Integration with Amazon Alexa, detailed setup instructions

`speech` (Speech)

Speech synthesis plugin. When enabled, speaks out the blood glucose values, IOB and alarms. Note you have to set the LANGUAGE setting on the server to get all translated alarms.

`cors` (CORS)

Enabled CORS so other websites can make request to your Nightscout site, uses these extended settings:

CORS_ALLOW_ORIGIN (*) - The list of sites that are allow to make requests

Extended Settings

Some plugins support additional configuration using extra environment variables. These are prefixed with the name of the plugin and a _. For example setting MYPLUGIN_EXAMPLE_VALUE=1234 would make extendedSettings.exampleValue available to the MYPLUGIN plugin.

Plugins only have access to their own extended settings, all the extended settings of client plugins will be sent to the browser.

DEVICESTATUS_ADVANCED (true) - Defaults to true. Users who only have a single device uploading data to Nightscout can set this to false to reduce the data use of the site.

Pushover

In addition to the normal web based alarms, there is also support for Pushover based alarms and notifications.

To get started install the Pushover application on your iOS or Android device and create an account.

Using that account login to Pushover, in the top left you’ll see your User Key, you’ll need this plus an application API Token/Key to complete this setup.

You’ll need to Create a Pushover Application. You only need to set the Application name, you can ignore all the other settings, but setting an Icon is a nice touch. Maybe you'd like to use this one?

Pushover is configured using the following Environment Variables:

* `ENABLE` - `pushover` should be added to the list of plugin, for example: `ENABLE="pushover"`.
* `PUSHOVER_API_TOKEN` - Used to enable pushover notifications, this token is specific to the application you create from in [Pushover](https://pushover.net/), ***[additional pushover information](#pushover)*** below.
* `PUSHOVER_USER_KEY` - Your Pushover user key, can be found in the top left of the [Pushover](https://pushover.net/) site, this can also be a pushover delivery group key to send to a group rather than just a single user.  This also supports a space delimited list of keys.  To disable `INFO` level pushes set this to `off`.
* `PUSHOVER_ALARM_KEY` - An optional Pushover user/group key, will be used for system wide alarms (level > `WARN`).  If not defined this will fallback to `PUSHOVER_USER_KEY`.  A possible use for this is sending important messages and alarms to a CWD that you don't want to send all notification too.  This also support a space delimited list of keys.  To disable Alarm pushes set this to `off`.
* `PUSHOVER_ANNOUNCEMENT_KEY` - An optional Pushover user/group key, will be used for system wide user generated announcements.  If not defined this will fallback to `PUSHOVER_USER_KEY` or `PUSHOVER_ALARM_KEY`.  This also support a space delimited list of keys. To disable Announcement pushes set this to `off`.
* `BASE_URL` - Used for pushover callbacks, usually the URL of your Nightscout site, use https when possible.
* `API_SECRET` - Used for signing the pushover callback request for acknowledgments.

If you never want to get info level notifications (treatments) use `PUSHOVER_USER_KEY="off"`
If you never want to get an alarm via pushover use `PUSHOVER_ALARM_KEY="off"`
If you never want to get an announcement via pushover use `PUSHOVER_ANNOUNCEMENT_KEY="off"`

If only `PUSHOVER_USER_KEY` is set it will be used for all info notifications, alarms, and announcements

For testing/development try [localtunnel](http://localtunnel.me/).

IFTTT Maker

In addition to the normal web based alarms, and pushover, there is also integration for IFTTT Maker.

With Maker you are able to integrate with all the other IFTTT Channels. For example you can send a tweet when there is an alarm, change the color of hue light, send an email, send and sms, and so much more.

Setup IFTTT account: login or create an account
Find your secret key on the maker page
Configure Nightscout by setting these environment variables:

ENABLE - maker should be added to the list of plugin, for example: ENABLE="maker".
MAKER_KEY - Set this to your secret key that you located in step 2, for example: MAKER_KEY="abcMyExampleabc123defjt1DeNSiftttmak-XQb69p" This also support a space delimited list of keys.
MAKER_ANNOUNCEMENT_KEY - An optional Maker key, will be used for system wide user generated announcements. If not defined this will fallback to MAKER_KEY. A possible use for this is sending important messages and alarms to a CWD that you don't want to send all notification too. This also support a space delimited list of keys.

Create a recipe or see more detailed instructions

Plugins can create custom events, but all events sent to maker will be prefixed with ns-. The core events are:

ns-event - This event is sent to the maker service for all alarms and notifications. This is good catch all event for general logging.
ns-allclear - This event is sent to the maker service when an alarm has been ack'd or when the server starts up without triggering any alarms. For example, you could use this event to turn a light to green.
ns-info - Plugins that generate notifications at the info level will cause this event to also be triggered. It will be sent in addition to ns-event.
ns-warning - Alarms at the warning level with cause this event to also be triggered. It will be sent in addition to ns-event.
ns-urgent - Alarms at the urgent level with cause this event to also be triggered. It will be sent in addition to ns-event.
see the full list of events

Treatment Profile

Some of the plugins make use of a treatment profile that can be edited using the Profile Editor, see the link in the Settings drawer on your site.

Treatment Profile Fields:

timezone (Time Zone) - time zone local to the patient. Should be set.
units (Profile Units) - blood glucose units used in the profile, either "mgdl" or "mmol"
dia (Insulin duration) - value should be the duration of insulin action to use in calculating how much insulin is left active. Defaults to 3 hours.
carbs_hr (Carbs per Hour) - The number of carbs that are processed per hour, for more information see #DIYPS.
carbratio (Carb Ratio) - grams per unit of insulin.
sens (Insulin sensitivity) How much one unit of insulin will normally lower blood glucose.
basal The basal rate set on the pump.
target_high - Upper target for correction boluses.
target_low - Lower target for correction boluses.

Some example profiles are here.

Setting environment variables

Easy to emulate on the commandline:

    echo 'MONGO_CONNECTION=mongodb://sally:[email protected]:99999/nightscout' >> my.env
    echo 'MONGO_COLLECTION=entries' >> my.env

From now on you can run using

    $ (eval $(cat my.env | sed 's/^/export /') && PORT=1337 node server.js)

Your hosting provider probably has a way to set these through their GUI.

Vagrant install

Optionally, use Vagrant with the included Vagrantfile and setup.sh to install OS and node packages to a virtual machine.

host$ vagrant up
host$ vagrant ssh
vm$ setup.sh

The setup script will install OS packages then run npm install.

The Vagrant VM serves to your host machine only on 192.168.33.10, you can access the web interface on http://192.168.33.10:1337

License

cgm-remote-monitor - web app to broadcast cgm readings
Copyright (C) 2017 Nightscout contributors.  See the COPYRIGHT file
at the root directory of this distribution and at
https://github.com/nightscout/cgm-remote-monitor/blob/master/COPYRIGHT

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published
by the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

Name		Name	Last commit message	Last commit date
Latest commit History 4,778 Commits
.github/ISSUE_TEMPLATE		.github/ISSUE_TEMPLATE
bin		bin
bundle		bundle
docs		docs
lib		lib
static		static
testing		testing
tests		tests
views		views
.bowerrc		.bowerrc
.deployment		.deployment
.dockerignore		.dockerignore
.gitattributes		.gitattributes
.gitignore		.gitignore
.nvmrc		.nvmrc
.travis.yml		.travis.yml
CONTRIBUTING.md		CONTRIBUTING.md
COPYRIGHT		COPYRIGHT
Dockerfile.example		Dockerfile.example
LICENSE		LICENSE
Makefile		Makefile
Procfile		Procfile
README.md		README.md
Vagrantfile		Vagrantfile
app.js		app.js
app.json		app.json
azuredeploy.json		azuredeploy.json
database_configuration.json		database_configuration.json
deploy.sh		deploy.sh
env.js		env.js
example-profiles.md		example-profiles.md
npm-shrinkwrap.json		npm-shrinkwrap.json
package.json		package.json
prep_repo_release.sh		prep_repo_release.sh
server.js		server.js
setup.sh		setup.sh
swagger.json		swagger.json
swagger.yaml		swagger.yaml
web.config		web.config
webpack.config.js		webpack.config.js

License

decimalator/cgm-remote-monitor

Folders and files

Latest commit

History

Repository files navigation

Nightscout Web Monitor (a.k.a. cgm-remote-monitor)

#WeAreNotWaiting and this is why.

Install

Usage

Updating my version?

What is my mongo string?

Configure my uploader to match

Nightscout API

Example Queries

Environment

Required

Features/Labs

Alarms

Core

Predefined values for your browser settings (optional)

Views

Plugins

Default Plugins

delta (BG Delta)

direction (BG Direction)

upbat (Uploader Battery)

timeago (Time Ago)

devicestatus (Device Status)

errorcodes (CGM Error Codes)

ar2 (AR2 Forecasting)

simplealarms (Simple BG Alarms)

profile (Treatment Profile)

Advanced Plugins:

careportal (Careportal)

boluscalc (Bolus Wizard)

food (Custom Foods)

rawbg (Raw BG)

iob (Insulin-on-Board)

cob (Carbs-on-Board)

bwp (Bolus Wizard Preview)

cage (Cannula Age)

sage (Sensor Age)

iage (Insulin Age)

treatmentnotify (Treatment Notifications)

basal (Basal Profile)

bridge (Share2Nightscout bridge)

mmconnect (MiniMed Connect bridge)

pump (Pump Monitoring)

openaps (OpenAPS)

loop (Loop)

xdrip-js (xDrip-js)

alexa (Amazon Alexa)

speech (Speech)

cors (CORS)

Extended Settings

Pushover

IFTTT Maker

Treatment Profile

Setting environment variables

Vagrant install

More questions?

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

`delta` (BG Delta)

`direction` (BG Direction)

`upbat` (Uploader Battery)

`timeago` (Time Ago)

`devicestatus` (Device Status)

`errorcodes` (CGM Error Codes)

`ar2` (AR2 Forecasting)

`simplealarms` (Simple BG Alarms)

`profile` (Treatment Profile)

`careportal` (Careportal)

`boluscalc` (Bolus Wizard)

`food` (Custom Foods)

`rawbg` (Raw BG)

`iob` (Insulin-on-Board)

`cob` (Carbs-on-Board)

`bwp` (Bolus Wizard Preview)

`cage` (Cannula Age)

`sage` (Sensor Age)

`iage` (Insulin Age)

`treatmentnotify` (Treatment Notifications)

`basal` (Basal Profile)

`bridge` (Share2Nightscout bridge)

`mmconnect` (MiniMed Connect bridge)

`pump` (Pump Monitoring)

`openaps` (OpenAPS)

`loop` (Loop)

`xdrip-js` (xDrip-js)

`alexa` (Amazon Alexa)

`speech` (Speech)

`cors` (CORS)

Packages