Flsun v400 overhaul in accordance to Klipper standards / delta. Page under construction.

For varying user Skill reasons there will be 2 config variants. Oem Klipper Vanilla. (Raspberry pi general linux , or Reinstalled speeder-pad) Flsun speederspad klipper. (has manhychanges to core klipper files....)

NOTE: On some printers it may be nessasary to temporarily increase minimum_z_position: -5 for the initial setup to run "probe_calibrate" due to varying qc. This should afterwards be set default or somthing like 0.6-1mm once "delta calibrate or "calibrate macro" run for the first time applying the machine specific measurements. The first savv_config will also add a section to printer.cfg with calibrated overrides. E.g zoffset ,delta_calibrate pid etc

Whats new? v400 trams in accordance to delta docs. Calibrate button which will run , Endstop calibration , Delta_calibrate , bed_mesh. This button is to be used ONLY after Probe_calibrate has been run setting up the probe offset. The order of events remians absolute, setup probe offset (probe_calibrate) delta_calibrae to apply zoffset / tram the arms only then will it be trammed allowing mesh to work. When running the calibrate button first preheat the bed to temp used for printing. The probe must be on. It is automated and will run a routine rebooting /saving on its own it will complete once bed_mesh has finished. Fluidd / Mainsail will also display what procedure is running. lastly once complete it will leave the (babystep) 0.6mm high. This is to avoid scrapes if Zoffset is wrong. On the first print simply (babystep) down from mainsail or Klipperscreen.

Spread cycle and, stealth chops is possible. In accordance to tmc docs spreadcycle is the most accurate in theory however it is degreeingly more loud. (not much) The mode can be set in start gcode. eg stealthchop or spreadcyle or manually selecting the button.

Safe homing

Extruder in gear ratio

Tmc spreadsheet tuning

auto-saving Baby step based on Mental's xyz offset macro

Heavy duty input shaper tuning

Raspberry pi pico adxl support

Ideamaker profiles

bed mesh works properly now.....

Revised macros redundant removed

Effector led turns on running G28

automated calibration (endstop , deltacal bed mesh) preheat the bed fist before using this. probe must be on.

0.4 cht not really required but useful in large hole sizes eg 0.6-1mm

ongong support / bug resolution for "configs" I have 0 control over issues related to bugs resulting from X project making changes other then updating configs if its a featuere change.

For any further support https://www.facebook.com/groups/1502404840209556 general support / Repo Update bulletin board
website https://www.klipper3d.org https://klipperscreen.readthedocs.io/en/latest/ Stock note the v400 pad is heavily modified and will vary from docs also the Zcalibrate is babystep this is currently wrong and, will lead to high deviation numbers.... Probe_calibrate must be used from terminal or oem klipperscreen has a option for this. https://docs.mainsail.xyz mainsail ui https://github.com/Arksine/moonraker https://github.com/th33xitus/kiauh

Note links are also used to credit various authors or credits will typically be marked in the .cfgs for corresponding code or collab efforts. Flsun v400 Facebook community KevinOConnor The klipper 0.s mainsail / fluidd teams KlipperScreen.

Note I have not done collabs of anykind or Otherwise if / when they will listed. I do not endorce the use of any devs "work" in regards to testing , material cost , time/labour or potential damages For use for personal gains monatary or otherwise. eg carbon copies for self promotion. In regards to open source all code free in accordance to gnu and expected to be used shared improved etc. Always make sure to thank devs for work / time or support. Happy Printinng.