メイン電装統合

Ground/Ground.ino

@@ -0,0 +1,55 @@
+#define Serial_ES920 Serial1
+
+void setup() {
+  // put your setup code here, to run once:
+  //Serial.setFIFOSize(64);
+  Serial.begin(115200);
+
+  Serial_ES920.begin(115200);
+  while (Serial_ES920.available()) {
+    Serial_ES920.read();
+  }
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+  if (Serial.available()) {
+    char c = (char)Serial.read();
+    Serial_ES920.write(c);
+    // Serial.write(c);
+  }
+
+  if (Serial_ES920.available()) {
+    char c = (char)Serial_ES920.read();
+    Serial.write(c);
+  }
+}
+
+// GROUND
+// configuration setting is below.
+// -------------------------------------
+// Node                        : EndDevice
+// Band Width                  : 125kHz
+// Spreading Factor            : 11
+// Effective Bitrate           : 537bps
+// Channel                     : 2
+// PAN ID                      : 0001
+// Own Node ID                 : 0001
+// Destination ID              : 0000
+// Acknowledge                 : OFF
+// Retry count                 : 3
+// Transfer Mode               : Payload
+// Receive Node ID information : OFF
+// RSSI information            : ON
+// Config/Operation            : Operation
+// UART baudrate               : 115200
+// Sleep Mode                  : No Sleep
+// Sleep Time                  : 50
+// Output Power                : 13dBm
+// Format                      : ASCII
+// Send Time                   : 0
+// Send Data                   : 
+// AES Key                     : 00000000000000000000000000000000
+// RF Mode                     : TxRx
+// Protocol Type               : Private LoRa
+// Rx Boosted                  : ON