The audit cookbook allows you to run InSpec profiles as part of a Chef Client run. It downloads configured profiles from various sources like Chef Automate, Chef Supermarket or Git and reports audit runs to Chef Automate.
The audit cookbook has been replaced by the Chef Infra Compliance phase which shipped in Chef Infra Client 17. This new phase of execution within the Chef Infra Client includes the functionality of the audit cookbook (plus a lot more) without the need for an external cookbook. This cookbook will continue to work for existing users, but will no longer receive updates. Consider migrating the Compliance Phase for enhanced functionality:
https://docs.chef.io/chef_compliance_phase/
The audit cookbook supports a number of different reporters and fetchers which can be confusing. Please see the supported configurations documentation which has a few copy/paste examples to get you started quickly.
- Chef Client >=12.20
| Automate version | InSpec version | Audit Cookbook version |
|---|---|---|
| < 0.8.0 | ≤ 1.23.0 | ≤ 3.1.0 |
| ≥ 0.8.0 | ≥ 1.24.0 | ≥ 4.0.0 |
| ≥ 2 | ≥ 2.2.102 | ≥ 7.1.0 |
| Chef Client | Audit Cookbook version |
|---|---|
| >= 15 | >= 8.0.0 |
Note:
When used with Chef Infra Client 15 and above, the Audit cookbook must be >= 7.7.0. Otherwise, you will see the following failure. Of course, we recommend using the latest available Chef Infra Client and audit cookbook after testing in your non-production environments. Remove the inspec_version setting. See more detail in the Inspec Gem Installation section
Newer Chef Infra Clients, in the 15.x and 16.x ranges ship with an inspec-core gem that the audit cookbook in the proper version range listed in the matrix above knows to use. It will not attempt to download a gem in this case.
We find that 14.12 has the inspec-core 3.9.0 gem embedded which should generate reports compatible with A2, but anything before that uses InSpec gem v2.x which is NOT compatible with A2. To explain further, Inspec 2.x will send reports to A2, but they will false positive, as this report format is incompatible with A2
Chef Infra Client 14.x + plain, non inspec-core InSpec 3.9.3 installed by the audit cookbook gem installer definitely works. So in Chef Infra Client 14.x before 14.12, we recommend this usage.
┌──────────────────────┐ ┌──────────────────────┐ ┌─────────────────────┐
│ Chef Infra Client │ │ Chef Server Proxy │ │ Chef Automate │
│ │ │ (optional) │ │ │
│ ┌──────────────────┐ │ │ │ │ │
│ │ │◀┼────┼──────────────────────┼────│ Profiles │
│ │ audit cookbook │ │ │ │ │ │
│ │ │─┼────┼──────────────────────┼───▶│ Reports │
│ └──────────────────┘ │ │ │ │ │
│ │ │ │ │ │
└──────────────────────┘ └──────────────────────┘ └─────────────────────┘
InSpec Profiles can be hosted from a variety of locations:
┌──────────────────────┐ ┌─────────────────────┐
│ Chef Infra Client │ ┌───────────────────────┐ │ Chef Automate │
│ │ ┌──│ Profiles(Supermarket, │ │ │
│ ┌──────────────────┐ │ │ │ GitHub, local, etc) │ │ │
│ │ │◀┼──┘ └───────────────────────┘ │ │
│ │ audit cookbook │◀┼────────────────────────────────│ Profiles │
│ │ │─┼───────────────────────────────▶│ Reports │
│ └──────────────────┘ │ │ │
│ │ │ │
└──────────────────────┘ └─────────────────────┘
The audit cookbook needs to be configured for each node where the chef-client runs. The audit cookbook can be reused for all nodes, all node-specific configuration is done via Chef attributes.
This section refers to EOL configuration. Starting with Chef Infra Client 15.x, only the embedded InSpec gem can be used and the inspec_version attribute will be ignored. Additionally, attempting to continue installing another version of the gem outside the Chef Infra Client inspec-core installation using the inspec_gem() resource can result in errors like the following. If you are running a Chef Infra Client release earlier than 15.x, we recommend testing an upgrade to Chef Infra Client 16.x, using the latest available audit cookbook version, and removing any inspec_version setting you may have done in your wrapper cookbook
[2020-09-22T10:43:51-04:00] ERROR: Report handler Chef::Handler::AuditReport raised #<LoadError: cannot load such file -- chef-server/fetcher>
[2020-09-22T10:43:51-04:00] ERROR: /opt/chef/embedded/lib/ruby/2.6.0/rubygems/core_ext/kernel_require.rb:54:in `require'
[2020-09-22T10:43:51-04:00] ERROR: /opt/chef/embedded/lib/ruby/2.6.0/rubygems/core_ext/kernel_require.rb:54:in `require'
[2020-09-22T10:43:51-04:00] ERROR: /var/chef/cache/cookbooks/audit/files/default/handler/audit_report.rb:138:in `load_chef_fetcher'
[2020-09-22T10:43:51-04:00] ERROR: /var/chef/cache/cookbooks/audit/files/default/handler/audit_report.rb:62:in `report'
Beginning with version 3.x of the audit cookbook, the cookbook will first check to see if an InSpec gem is already installed. If it is, it will not attempt to install it. With the release of Chef Infra Client 14.2.x, the Chef omnibus package includes InSpec as a gem inspec-core. Recent releases of the audit cookbook use of this bundled component will reduce audit run times and also ensure that Chef users in air-gapped or firewalled environments can still use the audit cookbook without requiring gem mirrors, etc.
To install a different version of the InSpec gem, or to force installation of the gem, set the node['audit']['inspec_version'] attribute to the version you wish to be installed.
Beginning with version 3.x of the audit cookbook, the default version of the InSpec gem to be installed (if it isn't already installed) is the latest version. Prior versions of the audit cookbook were version-locked to inspec version 1.15.0. The use of Chef Infra Client versions 14.x and earlier was EOL as of April 30, 2020
Note on AIX Support:
- InSpec is only supported via the bundled InSpec gem shipped with version >= 14.2.x of the chef-client package.
- Standalone InSpec gem installation or upgrade is not supported.
- The default
nilvalue ofnode['audit']['inspec_version']will ensure the above behavior is adhered to.
Once the cookbook is available in Chef Server, you need to add the audit::default recipe to the run-list of each node (or, preferably create a wrapper cookbook). The profiles are selected using the node['audit']['profiles'] attribute. A list of example configurations are documented in Supported Configurations. Below is another example demonstrating the different locations profiles can be "fetched" from:
default['audit']['profiles']['linux-baseline'] = {
'compliance': 'user/linux-baseline',
'version': '2.1.0'
}
default['audit']['profiles']['ssh'] = {
'supermarket': 'hardening/ssh-hardening'
}
default['audit']['profiles']['brewinc/win2012_audit'] = {
'path': 'E:/profiles/win2012_audit'
}
default['audit']['profiles']['ssl'] = {
'git': 'https://github.com/dev-sec/ssl-benchmark.git'
}
default['audit']['profiles']['ssh2'] = {
'url': 'https://github.com/dev-sec/tests-ssh-hardening/archive/master.zip'
}You can also pass in InSpec Attributes to your audit run. Do this by defining the attributes:
default['audit']['attributes'] = {
first_attribute: 'some value',
second_attribute: 'another value',
}You can use Chef InSpec's Waiver Feature to mark individual failing controls as being administratively accepted, either on a temporary or permanent basis. Prepare a waiver YAML file, and use your Chef Infra cookbooks to deliver the file to your converging node (for example, using cookbook_file or remote_file). Then set the attribute default['audit']['waiver_file'] to the location of the waiver file on the local node, and Chef InSpec will apply the waivers.
To retrieve compliance profiles and report to Chef Automate through Chef Server, set the reporter and profiles attributes.
This requires Chef Client >= 12.16.42, Chef Server version 12.11.1, and Chef Automate 0.6.6 or newer, as well as integration between the Chef Server and Chef Automate. More details here.
To upload profiles, you can use the Automate API or the inspec compliance subcommands (requires InSpec 1.7.2 or newer).
Attributes example of fetching from Automate, reporting to Automate both via Chef Server:
default['audit']['reporter'] = 'chef-server-automate'
default['audit']['fetcher'] = 'chef-server'
default['audit']['profiles']['my-profile'] = {
'compliance': 'john/my-profile'
}To report directly to Chef Automate, set the reporter attribute to 'chef-automate' and specify where to fetch the profiles from.
insecure- atruevalue will skip the SSL certificate verification. Default value isfalse
This method sends the report using the data_collector.server_url and data_collector.token options, defined in client.rb. It requires inspec version 0.27.1 or greater. Further information is available at Chef Docs: Configure a Data Collector token in Chef Automate
default['audit']['reporter'] = 'chef-automate'
default['audit']['profiles']['tmp_compliance_profile'] = {
'url': 'https://github.com/nathenharvey/tmp_compliance_profile'
}If you are using a self-signed certificate, please also read how to add the Chef Automate certificate to the trusted_certs directory
Version compatibility matrix:
| Automate version | InSpec version | Audit Cookbook version |
|---|---|---|
| < 0.8.0 | ≤ 1.23.0 | ≤ 3.1.0 |
| ≥ 0.8.0 | ≥ 1.24.0 | ≥ 4.0.0 |
The size of the report being generated from running the compliance scan is influenced by a few factors like:
- number of controls and tests in a profile
- number of profile failures for the node
- controls metadata (title, description, tags, etc)
- number of resources (users, processes, etc) that are being tested
Depending on your setup, there are some limits you need to be aware of. A common one is Chef Server default (1MB) request size. Exceeding this limit will reject the report with ERROR: 413 "Request Entity Too Large". For more details about these limits, please refer to TROUBLESHOOTING.md.
To write the report to a file on disk, simply set the reporter to 'json-file' like so:
default['audit']['reporter'] = 'json-file'
default['audit']['profiles']['ssh2'] = {
'path': '/some/base_ssh.tar.gz'
}The resulting file will be written to node['audit']['json_file']['location'] which defaults to
<chef_cache_path>/cookbooks/audit/inspec-<YYYYMMDDHHMMSS>.json. The path will also be output to
the Chef log:
[2017-08-29T00:22:10+00:00] INFO: Reporting to json-file
[2017-08-29T00:22:10+00:00] INFO: Writing report to /opt/kitchen/cache/cookbooks/audit/inspec-20170829002210.json
[2017-08-29T00:22:10+00:00] INFO: Report handlers complete
The audit-enforcer enables you to enforce compliance with executed profiles. If the system under test is determined to be non-compliant, this reporter will raise an error and fail the Chef Client run. To activate compliance enforcement, set the reporter attribute to 'audit-enforcer':
default['audit']['reporter'] = 'audit-enforcer'Note that detection of non-compliance will immediately terminate the Chef Client run. If you specify multiple reporters, place the audit-enforcer at the end of the list, allowing the other reporters to generate their output prior to run termination.
To enable multiple reporters, simply define multiple reporters with all the necessary information for each one. For example, to report to Chef Automate and write to json file on disk:
default['audit']['reporter'] = ['chef-server-automate', 'json-file']
default['audit']['profiles']['windows'] = {
'compliance': 'base/windows'
}
)To enable reporting to Chef Automate with profiles from Chef Automate, you need to have Chef Server integrated with Chef Automate. You can then set the fetcher attribute to 'chef-server'.
This allows the audit cookbook to fetch profiles stored in Chef Automate. For example:
default['audit']['reporter'] = 'chef-server-automate'
default['audit']['fetcher'] = 'chef-server'
default['audit']['profiles']['ssh'] = {
'compliance': 'base/ssh'
}This method fetches profiles using the data_collector.server_url and data_collector.token options, in client.rb. It requires inspec version 0.27.1 or greater. Further information is available at Chef Docs: Configure a Data Collector token in Chef Automate
default['audit']['reporter'] = 'chef-automate'
default['audit']['fetcher'] = 'chef-automate'
default['audit']['profiles']['ssh'] = {
'name': 'ssh',
}If you have long running audit profiles that you don't wish to execute on every chef-client run, you can enable an interval:
default['audit']['interval']['enabled'] = true
default['audit']['interval']['time'] = 1440 # once a day, the default value
The time attribute is in minutes.
You can enable the interval and set the interval time, along with your desired profiles, in an environment or role like this:
"audit": {
"profiles": [
{
"name": "ssh",
"compliance": "base/ssh"
},
{
"name": "linux",
"compliance": "base/linux"
}
],
"interval": {
"enabled": true,
"time": 1440
}
}If you are not able or do not wish to pull the inspec gem from rubygems.org,
you may specify an alternate source using:
# URI to alternate gem source (e.g. http://gems.server.com or filesytem location)
# root of location must host the *specs.4.8.gz source index
default['audit']['inspec_gem_source'] = 'http://internal.gem.server.com/gems'
Please note that all dependencies to the inspec gem must also be hosted in this location.
While it is recommended that InSpec profiles should be self-contained and not rely on external data unless necessary, there are valid use cases where a profile's test may exhibit different behavior depending on aspects of the node under test.
There are two primary ways to pass Chef data to the InSpec run via the audit cookbook.
Any data added to the node['audit']['attributes'] hash will be passed as individual InSpec attributes.
This provides a clean interface between the Chef run and InSpec profile, allowing for easy assignment
of sane default values in the InSpec profile. This method is especially recommended if the InSpec profile
is expected to be used outside of the context of the audit cookbook so it's extra clear to profile
consumers what attributes are necessary.
In a wrapper cookbook or similar, set your Chef attributes:
node.normal['audit']['attributes']['key1'] = 'value1'
node.normal['audit']['attributes']['debug_enabled'] = node['my_cookbook']['debug_enabled']
node.normal['audit']['attributes']['environment'] = node.chef_environment... and then use them in your InSpec profile:
environment = attribute('environment', description: 'The chef environment for the node', default: 'dev')
control 'debug-disabled-in-production' do
title 'Debug logs disabled in production'
desc 'Debug logs contain potentially sensitive information and should not be on in prod.'
impact 1.0
describe file('/path/to/my/app/config') do
its('content') { should_not include "debug=true" }
end
only_if { environment == 'production' }
endIn the event where it is not practical to opt-in to pass certain attributes and data, the audit cookbook will
pass the Chef node object as an InSpec attribute named chef_node.
While this provides the ability to write more flexible profiles, it makes it more difficult to reuse profiles outside of an audit cookbook run, requiring the profile user to know how to pass in a single attribute containing Chef-like data. Therefore, it is recommended to use Option 1 whenever possible.
To use this option, first enable it in a wrapper cookbook or similar:
node.override['audit']['chef_node_attribute_enabled'] = true... and then use it in your profile:
chef_node = attribute('chef_node', description: 'Chef Node')
control 'no-password-auth-in-prod' do
title 'No Password Authentication in Production'
desc 'Password authentication is allowed in all environments except production'
impact 1.0
describe sshd_config do
its('PasswordAuthentication') { should cmp 'No' }
end
only_if { chef_node['chef_environment'] == 'production' }
endIntroduced in Audit Cookbook v6.0.0 and InSpec v1.47.0
InSpec v1.47.0 provides the ability to cache the result of commands executed on the node being tested. This drastically improves InSpec performance when slower-running commands are run multiple times during execution.
This feature is enabled by default in the audit cookbook. If your profile runs a command multiple times and expects output to be different each time, you may have to disable this feature. To do so, set the inspec_backend_cache attribute to false:
node.normal['audit']['inspec_backend_cache'] = falsePlease refer to TROUBLESHOOTING.md.
Please let us know if you have any issues, we are happy to help.
Install Chef Development Kit on your machine.
# Install webmock gem needed by rspec
chef gem install webmock
# Run style checks
rake style
# Run all unit and ChefSpec tests
rspec
# Run a specific test
rspec ./spec/unit/libraries/automate_spec.rb- Cookbook source located here: (https://github.com/chef-cookbooks/audit)
- Hosted Chef users("collaborators") that can publish it to supermarket.chef.io:
apop,arlimus,chris-rock,sr. Add more collaborators fromSupermarket>Manage Cookbook>Add Collaborator
Releasing a new cookbook version:
- Install changelog gem:
chef gem install github_changelog_generator - version bump the metadata.rb and updated changelog (
rake changelog) - Get your changes merged into master
- Go to the
auditcookbook directory and pull from master - Run
bundle install - Use stove to publish the cookbook(including git version tag). You must point to the private key of your hosted chef user. For example:
stove --username apop --key ~/git/chef-repo/.chef/apop.pem
| Author: | Stephan Renatus ([email protected]) |
| Author: | Christoph Hartmann ([email protected]) |
| Copyright: | Copyright (c) 2015 Chef Software Inc. |
| License: | Apache License, Version 2.0 |
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.