Bump the all group across 1 directory with 8 updates

[dependabot]

Bumps the all group with 2 updates in the / directory: github.com/cert-manager/cert-manager and sigs.k8s.io/controller-runtime.

Updates github.com/cert-manager/cert-manager from 1.16.2 to 1.17.0

Release notes

Sourced from github.com/cert-manager/cert-manager's releases.

v1.17.0

cert-manager is the easiest way to automatically manage certificates in Kubernetes and OpenShift clusters.

v1.17.0 is a feature release with several improvements, including:

• A helpful compliance change to RSA signatures on certificates
• An easier way to specify passwords for PKCS#12 and JKS keystores
• A few feature flag promotions (and a deprecation)
• Dependency bumps and other smaller improvements

Major Themes

RSA Certificate Compliance

The United States Department of Defense published a memo in 2022 which introduced some requirements on the kinds of cryptography they require to be supported in software they use.

In effect, the memo requires that software be able to support larger RSA keys (3072-bit and 4096-bit) and hashing algorithms (SHA-384 at a minimum).

cert-manager supported large RSA keys long before the memo was published, but a quirk in implementation meant that cert-manager always used SHA-256 when signing with RSA.

In v1.17.0, cert-manager will choose a hash algorithm based on the RSA key length: 3072-bit keys will use SHA-384, and 4096-bit keys will use SHA-512. This matches similar behavior already present for ECDSA signatures.

Our expectation is that this change will have minimal impact beyond a slight increase to security and better compliance; we're not aware of Kubernetes based environments which support RSA 2048 with SHA-256 but fail with RSA 4096 and SHA-512. However, if you're using larger RSA keys, you should be aware of the change.

Easier Keystore Passwords for PKCS#12 and JKS

Specifying passwords on PKCS#12 and JKS keystores is supported in cert-manager for compatibility reasons with software which expects or requires passwords to be set; however, these passwords are not relevant to security and never have been in cert-manager.

The initial implementation of the keystores feature required these "passwords" to be stored in a Kubernetes secret, which would then be read by cert-manager when creating the keystore after a certificate was issued. This is cumbersome, especially when many passwords are set to default values such as changeit or password.

In cert-manager v1.17, it's now possible to set a keystore password using a literal string value inside the Certificate resource itself, making this process much easier with no change to security.

For example:

apiVersion: cert-manager.io/v1
kind: Certificate
metadata:
  name: my-cert-password
spec:
  secretName: my-cert-password
  issuerRef:
    name: my-issuer
    kind: ClusterIssuer
  keystores:
    jks:
      create: true
      password: "abc123"
    pkcs12:
</tr></table> 

... (truncated)

Commits

• 4562b9a Merge pull request #6657 from rquinio1A/feature/keystore-password-litteral
• c6f3f0c Merge pull request #7527 from SgtCoDFish/upgrade-test-tweaks
• 40cd2a0 Add support for setting literal keystore passwords in Certificates
• 1747743 Merge pull request #7530 from SgtCoDFish/dns-test-integration
• 8233733 split tests using 'live' DNS into separate package
• 5e5ad2f Merge pull request #7529 from SgtCoDFish/bump-base
• a522470 Merge pull request #7428 from jsoref/shorten-skipping-controller-messages
• 2154402 bump base images to latest
• 637eab3 Simplify skipping controller messages
• c003da2 Merge pull request #7428 from jsoref/shorten-skipping-controller-messages
• Additional commits viewable in compare view

Updates golang.org/x/sync from 0.9.0 to 0.10.0

Commits

• 913fb63 singleflight: fix typo in singleflight_test.go
• See full diff in compare view

Updates k8s.io/api from 0.31.3 to 0.32.0

Commits

• e622342 Update dependencies to v0.32.0 tag
• b0543a3 Merge remote-tracking branch 'origin/master' into release-1.32
• f6bae9a Drop use of winreadlinkvolume godebug option
• ea815d5 Merge remote-tracking branch 'origin/master' into release-1.32
• c331a79 Revert to go1.22 windows filesystem stdlib behavior
• f8e5e36 Merge pull request #128407 from ndixita/pod-level-resources
• 84e0db8 Merge pull request #127857 from Jefftree/cle-v1alpha2
• cbaf5a0 Merge pull request #128686 from thockin/take_over_pr-125233
• a503a4f Merge pull request #128687 from tallclair/allocated-status
• 3f43b5a Merge pull request #128240 from LionelJouin/KEP-4817
• Additional commits viewable in compare view

Updates k8s.io/apiextensions-apiserver from 0.31.3 to 0.32.0

Commits

• 7215469 Update dependencies to v0.32.0 tag
• 887679f Merge remote-tracking branch 'origin/master' into release-1.32
• bd027a4 Drop use of winreadlinkvolume godebug option
• 919f42b Merge remote-tracking branch 'origin/master' into release-1.32
• a4e1034 Revert to go1.22 windows filesystem stdlib behavior
• 89d6021 Run codegen
• 2a91f8a Merge pull request #127513 from tkashem/delete-undecryptable
• 06dc95a api: run codegen
• 19f7123 Merge pull request #128639 from jpbetz/fix-cost-test
• 66631b6 Fix flake in CEL cost stability tests
• Additional commits viewable in compare view

Updates k8s.io/apimachinery from 0.31.3 to 0.32.0

Commits

• 59e9003 Merge remote-tracking branch 'origin/master' into release-1.32
• 639247c Drop use of winreadlinkvolume godebug option
• 220d7c3 Merge remote-tracking branch 'origin/master' into release-1.32
• c199d3b Revert to go1.22 windows filesystem stdlib behavior
• 16af2ff implement unsafe deletion, and wire it
• 6ff8305 api: run codegen
• ca9b8b2 api: add a new field to meta/v1 DeleteOptions
• d941d9f Merge pull request #128503 from benluddy/cbor-codecs-featuregate
• 3b4250f Wire serving codecs to CBOR feature gate.
• daaad09 Merge pull request #128501 from benluddy/watch-cbor-seq
• Additional commits viewable in compare view

Updates k8s.io/client-go from 0.31.3 to 0.32.0

Commits

• 0d55461 Update dependencies to v0.32.0 tag
• 4765ade Merge remote-tracking branch 'origin/master' into release-1.32
• 692a511 Drop use of winreadlinkvolume godebug option
• 9df5099 Merge remote-tracking branch 'origin/master' into release-1.32
• 120beb2 Revert to go1.22 windows filesystem stdlib behavior
• 55d23e2 Align fake client-go clients with the main interface
• 646e79b Run codegen
• c475fe0 Generify fake clientsets
• 955401c Merge pull request #128407 from ndixita/pod-level-resources
• eddb107 Merge pull request #127857 from Jefftree/cle-v1alpha2
• Additional commits viewable in compare view

Updates k8s.io/utils from 0.0.0-20240921022957-49e7df575cb6 to 0.0.0-20241210054802-24370beab758

Commits

• See full diff in compare view

Updates sigs.k8s.io/controller-runtime from 0.19.2 to 0.20.1

Release notes

Sourced from sigs.k8s.io/controller-runtime's releases.

v0.20.1

What's Changed

• 🐛 Check to see if custom source implements fmt.Stringer when logging by @​k8s-infra-cherrypick-robot in kubernetes-sigs/controller-runtime#3077
• 🐛 cache: clone maps to prevent data race when concurrently creating caches using the same options by @​k8s-infra-cherrypick-robot in kubernetes-sigs/controller-runtime#3079
• 🐛 support WaitForSync in custom TypedSyncingSource by @​k8s-infra-cherrypick-robot in kubernetes-sigs/controller-runtime#3086
• 🌱 Add debug logging for the state of the priority queue by @​k8s-infra-cherrypick-robot in kubernetes-sigs/controller-runtime#3088
• 🐛 Priorityqueue: Yet another queue_depth metric fix by @​k8s-infra-cherrypick-robot in kubernetes-sigs/controller-runtime#3089

Full Changelog: kubernetes-sigs/controller-runtime@v0.20.0...v0.20.1

v0.20.0

Highlights

• Based on k8s.io/* v1.32 libraries and minimum Go version is now v1.23
• New experimental priority queue feature
  • More details in #3013 and #2374
  • Can be enabled via manager.Options.Controller.UsePriorityQueue
  • Please give it a try and provide feedback in #2374
• AggregatedDiscovery is automatically used when available (#2901)
• As usual, many improvements to the fake client

Changes since v0.19.0

⚠️ Breaking Changes

• Bump to k8s.io/* v1.32 libraries (#2971 #2990 #3001 #3007 #3029 #3043)
• logging: Stop deduplicating API warnings by default (#2953)
• webhook: Stop deleting unknown fields in CustomDefaulter (#2982 #3056)
• webhook: Remove deprecated Defaulter and Validator (#2877 #2945)
• cluster: Remove deprecated SyncPeriod option (#2970)

✨ New Features

• cache: Add EnableWatchBookmarks option (defaults to true) (#3017)
• cache: Export NewInformer option (#3061)
• cert-watcher: Add polling (#3020 #3050)
• controller: Add experimental priority queue (off per default) (#3013 #3014 #3060 #3066)
• fake client: Allow adding indexes at runtime (#3021)
• fake client: Add support for ServiceAccountToken subresource (#2969)
• restmapper: Use AggregatedDiscovery if available (#2901)
• util: Add HasOwnerReference func (#2882)
• webhook: Add custom path option (#2998)

🐛 Bug Fixes

• controller: Error when source.Start() never returns (#2997 #3006 #3008)
• fake client: Don't return items on invalid selector (#3022)
• fake client: Fix TOCTOU races (#2980)
• fake client: Preserve TypeMeta during Get call with PartialObjectMeta (#2949)

... (truncated)

Commits

• 626b2f3 Merge pull request #3089 from k8s-infra-cherrypick-robot/cherry-pick-3085-to-...
• 64cb665 bug: Priorityqueue: Yet another queue_depth metric fix
• 791b6c9 Merge pull request #3088 from k8s-infra-cherrypick-robot/cherry-pick-3075-to-...
• 99a4044 🌱 Add debug logging for the state of the priority queue
• f33705e [release-0.20] 🐛fix(controller): support WaitForSync in custom TypedSyncingSo...
• 571c31a Merge pull request #3079 from k8s-infra-cherrypick-robot/cherry-pick-3078-to-...
• 8d66e89 cache: clone maps to prevent data race when concurrently creating caches usin...
• aa3f342 [release-0.20] 🐛 Check to see if custom source implements fmt.Stringer when l...
• 8f7e114 Merge pull request #3074 from sbueringer/pr-fix-fake-list
• 3b23354 fake client: preserve TypeMeta during List call with UnstructuredList
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[cert-manager-prow]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by:
Once this PR has been reviewed and has the lgtm label, please assign erikgb for approval. For more information see the Kubernetes Code Review Process.

The full list of commands accepted by this bot can be found here.

Needs approval from an approver in each of these files:

• OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[cert-manager-prow]

Hi @dependabot[bot]. Thanks for your PR.

I'm waiting for a cert-manager member to verify that this patch is reasonable to test. If it is, they should reply with /ok-to-test on its own line. Until that is done, I will not automatically test new commits in this PR, but the usual testing commands by org members will still work. Regular contributors should join the org to skip this step.

Once the patch is verified, the new status will be reflected by the ok-to-test label.

I understand the commands that are listed here.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.