custom signal generator in redpitaya
To compile in ubuntu make CROSS_COMPILE=arm-linux-gnueabi- clean all
Important Notes:
-
The custom signal must be named "gen_ch1.csv"
-
The number of samples in "gen_ch1.csv" must be integer multiples of 16384 (i.e. n*16384 , where n ranges from 1 to 30)
-
The IP address of your computer should be set to 192.168.1.101, the IP address of RedPitaya is 192.168.1.100
To connect to Redpitaya through ethernet cable in ubuntu/virtual box, you need to manually set the ip address (192.168.1.101) in host machine, and set the ipv4 to auto in client ubuntu.
- Ensure that your custom signal, "gen_ch1.csv", is located in the same file as the executable on Redpitaya