v3.2 with advanced Playground functionality by BLE services

dfu characteristic enabled(CM-17)

v3.1.0 Demo and Playgroud integration with optimized memory handling

This is a memory optimized version of the v3.0.0 Release. All features from the previous release are included.

v3.0.0 New Demo and Playground integration

This is a complete rewrite of the demo application including changes initial games, bluetooth support for OTA (over-the-air) programming and integrates with an iOS playground app. The latter allows programming the Calliope mini without flashing and has also some interactive features.

v2.0 (Hardware Release 1.0) - english localized

This is the same as the original release with english localized messages. Copy this to your Calliope mini to have it speak English instead of German.

v2.0 (Hardware rev 1.0 Demo)

Calliope mini Demo for hardware revision 1.0 (2017) and the production test firmware. After first flashing it will go into a test mode that is finished after the triple beep. Resetting will not show the test again. The Demo contains an intro and four little games to play, selectable by A or B and shaking to execute. Pressing A+B will go back to the menu. The Intro can be skipped by pressing A+B longer (~3s) and releasing, a beep will confirm.

The attached firmware.hex file is the compiled firmware that can be dropped onto the MINI drive that appears upon attaching the Calliope mini to a computer.

Consumer Download

Consumer download of the IT Gipfel Firmware that does no longer contain the test procedure. If you overwrote your original software on the Calliope mini, download the Calliope-Firmware-v1.1.hex and copy it onto the Calliope mini drive.

Final IT Gipfel Demo

Contains the final Calliope mini Demo and the production test firmware. After first flashing it will go into a test mode that is finished after the triple beep. Resetting will not show the test again. The Demo contains an intro and four little games to play, selectable by A or B and shaking to execute. Pressing A+B will go back to the menu. The Intro can be skipped by pressing A+B longer (~3s) and releasing, a beep will confirm.

The attached firmware.hex file is the compiled firmware that can be dropped onto the MINI drive that appears upon attaching the Calliope mini to a computer.