build-thing-sensors

BC_Sensor_Series

This is an Keil uVision5 library using stm32fvgt6x microcontroller to BC Sensor Series If you are using a different processor, you must check its pin connection.

Library Tested Conditions

• Processor : STM32F4VGT6
• UTILITY : STM32CubeMX, HAL Library
• Integrated Development Environment(IDE) : Keil uVision5

Repository Contents

• /Examples - Example project file for the library (/MDK-ARM/(file_name).uvprojx). Run these from the Keil.
• /Extra - Illust and photo.
• /Inc - Header files for the library (.h).
• /Src - Sorce files for the library (.c).

Example

• BC_Sensor_Series - the BC Sensor Series(BCDPDC100, BCHTS4085, BCALS083K, BCACC316G, BCAQS1187) for Keil.
• BCACC316G - the BCACC316G Sensor(ADXL343_3axis accelerometer) for Keil.
• BCALS083K - the BCALS083K Sensor(OPT3001_Q1_Ambient Light Sensor) for Keil.
• BCAQS1187 - the BCAQS1187 Sensor(CSS811_Air Quality Sensor) for Keil.
• BCDPDC100 - the BCDPDC100 Sensor(TMD2671_Digital Proximity Detector) for Keil.
• BCHTS4085 - the BCHTS4085 Sensor(HDC2010_Temperature and Humidity Sensor) for Keil.

Products that use this Library

• BC_Sensor_Series
• BCACC316G
• BCALS083K
• BCAQS1187
• BCDPDC100
• BCHTS4085
• USB to Serial(replaceable)

Typical Application

BC_Sensor_Series

---

BCACC316G

---

BCALS083K

---

BCAQS1187

---

BCDPDC100

---

BCHTS4085

---

How to Change Sensor Address (exclude BCDPDC100)

• Step 1 Remove

  Removing resistance on Resistor selection field

• Step 2 Solder

  Solder the resistor(0 Ω) to the desired address

• Step 3 Edit Code

  Edit code the address value defined in .uvprojx file. For example.

  //#define BCHTS4085_ADDR 0x40 //HDC2010
  #define BCHTS4085_ADDR 0x41 //HDC2010
  

How to Use Library

See Library Tested Conditions and check your development environment. Then, Please follow these steps.

• Step 1 Download

  Download the most recent version of the library from our git site

• Step 2 Check your circuit

  We used UART3 pin(PC10-rx, PC11-tx), I2C pin(PB10-SCL, PB11-SDA). Then, Check your own processor datasheet and change your circuit, source code.

• Step 3 Select the example

  Select the example of the sensor module you own. Project file path is /Examples/(sensorName)/MDK-ARM/(sensorName).uvprojx

• Step 4 Build the example

  Build target files and Download code to flash memory. You can get your sensor data by using any terminal program.