This repository contains tools and a Containerfile to build a container which provides a conveniant way to manage DPU's such as Bluefield-2 (BF-2) and Bluefield-3 (BF-3), Intel IPU, Marvell Octeon. Make sure that the underlying system has kernel-modules-extra installed (since cuse is a dependency) and run the container as follows (a build is available on quay.io):
sudo podman run --pull always --replace --pid host --network host --user 0 --name bf -dit --privileged -v /dev:/dev quay.io/bnemeth/dpu-tools <SUBCOMMAND>
All the tools can directly be interacted with through the dpu-tools interface. All the tools automatically find and act on the first DPU in the system.
Note: Using the console subcommand requires specifying what DPU type you are working with. Check out its help page by passing the -h flag.
| Tool/Subcommand | Purpose |
|---|---|
reset |
Reboots the DPU. |
list |
List all DPUs on the system. |
firmware |
Manages the firmware of the DPU. {version, reset, up} |
console |
Starts a minicom console to access the DPU. |
pxeboot |
Starts a pxe server and tells BF to boot from it. An coreos iso file needs to be passed. |
set_mode |
Sets the BF mode to either dpu or nic. One argument is required |
mode |
Gets the BF mode. Use --set-mode to change the mode to either dpu or nic |
utils |
Access common or non-dpu specific utilities. {cw_fwup, bfb} |
The pxeboot tool requires an argument; It expect an iso file with coreos that should
be booted through the rshim. The iso file can optionally be on an nfs mount point.
