Skip to content
forked from ni/grpc-device

gRPC server providing remote access to NI device driver APIs.

License

Notifications You must be signed in to change notification settings

bkeryan/grpc-device

 
 

Repository files navigation

NI gRPC Device Server and Client APIs

This repo contains the source code needed to build and run the NI gRPC Device Server for supported NI hardware driver APIs. Also contained in this repo are instructions and examples that demonstrate how to create client code that interacts with devices connected to an instance of the NI gRPC Device Server.

The server and the client APIs allow NI's instrumentation to be accessed and controlled through a remote interface via pre-defined APIs using a client/server architecture. The API is not a driver but instead a layer on top of the existing driver C APIs that provides remote capabilities.

For more detailed information on the server and API design refer to the wiki.

Supported NI drivers

NI Driver Minimum Version Tested (Windows) Minimum Version Tested (Linux)       Minimum Version Tested (Linux RT)
NI-DAQmx 21.0.0 21.0.0 21.0.0
NI-DCPower 20.6.0 20.1.0 20.7.0
NI-Digital Pattern Driver 20.6.0 Not Supported Not Supported
NI-DMM 20.0.0 20.1.0 20.5.0
NI-FGEN 20.0.0 Not Supported Not Supported
NI-RFmx Bluetooth 21.5.0 Not Supported Not Supported
NI-RFmx LTE 21.5.0 Not Supported Not Supported
NI-RFmx NR 21.5.0 Not Supported Not Supported
NI-RFmx SpecAn 21.5.0 Not Supported Not Supported
NI-RFmx WLAN 21.5.0 Not Supported Not Supported
NI-RFSA 21.0.0 21.0.0 Not Supported
NI-RFSG 21.0.0 21.0.0 Not Supported
NI-SCOPE 20.7.0 20.1.0 20.7.0
NI-SWITCH 20.0.0 20.1.0 20.5.0
NI-XNET 21.5.0 21.5.0 21.5.0
NI-TClk 20.7.0 20.0.0 20.7.0

Build Status

Linux Build NI Linux Real-Time Build

Downloading a Release

Download the Server

  1. (Windows Only) Download and install the latest Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019.
  2. Navigate to the Releases page.
  3. Download the latest Server Release .tar.gz or .zip for the desired platform.
  4. Extract the contents of the .tar.gz or .zip to a directory with read and write permissions.
  5. Run the server
  • List of supported OS:
    • Windows 64-bit
    • Linux 64-bit
    • NI Linux RT

Download the Client Files

  1. Navigate to the Releases page.
  2. Download the latest Client Release's ni-grpc-device-client.tar.gz or ni-grpc-device-client.zip depending on the client platform.
  3. Extract the contents of ni-grpc-device-client.tar.gz or ni-grpc-device-client.zip to a directory with read and write permissions.
  4. Create a gRPC client.

Building on Windows 64-bit

Prerequisites

To prepare for cmake + Microsoft Visual C++ compiler build

  • Install Visual Studio 2015, 2017, or 2019 (Visual C++ compiler will be used).
  • Install Git.
  • Install CMake 3.12.0 or newer and add it to the PATH.
  • Install Python and add it to the PATH.
  • Install mako

Launch "x64 Native Tools Command Prompt for Visual Studio" and change to a directory where you have write permissions. Alternatively, use Windows PowerShell in a directory where you have write permissions.

Clone Repo

Clone the repo and update submodules, this will pull the gRPC components and all dependencies

> git clone https://github.com/ni/grpc-device.git
> cd grpc-device
> git submodule update --init --recursive

Build Debug

Build a debug build if debugging symbols are required during development:

> mkdir build
> cd build
> cmake .. -A x64
> cmake --build .

Build Release

Build a release build for use in a production environment:

> mkdir build
> cd build
> cmake .. -A x64
> cmake --build . --config Release

Building on Linux

Prerequisites

For Debian/Ubuntu, install git, cmake (3.12.0 or newer), and mako:

> sudo apt-get update
> sudo apt-get install git
> sudo apt-get install cmake
> python -m pip install mako

For NI Linux RT, install git, git-perltools, cmake (3.12.0 or newer), python3-utils, and mako:

> opkg update
> opkg install git
> opkg install git-perltools
> opkg install cmake
> opkg install python3-misc
# follow the latest instructions to install pip:
# https://pip.pypa.io/en/stable/installing/
> python -m pip install mako

Note: Depending on the version of NI Linux RT, installing a newer version of CMake may be required. Follow the instructions to install CMake. If this is required, make sure to install openssl-dev as well.

> opkg install openssl-dev

Clone Repo

Clone the repo and update submodules, this will pull the gRPC components and all dependencies

> git clone https://github.com/ni/grpc-device.git grpc-device
> cd grpc-device
> git submodule update --init --recursive

Build Debug

Build a debug build if debugging symbols are required during development:

> mkdir -p cmake/build
> cd cmake/build
> cmake ../..
> make

Build Release

Build a release build for use in a production environment:

> mkdir -p cmake/build
> cd cmake/build
> cmake -DCMAKE_BUILD_TYPE=Release ../..
> make

Running the gRPC Server

The server's startup configuration is set by specifying port and security settings in a JSON configuration file. A default configuration file named server_config.json with an insecure configuration (no SSL/TLS) is located in the same directory as the server executable. For more information on SSL/TLS related security settings refer to the SSL/TLS Support section. The location of the server binary is not important as long as the user has proper permissions in the chosen directory.

There are two ways to start the server:

  1. Launch the server application without specifying a path to a configuration file (use the default configuration file):

    Windows

    .\ni_grpc_device_server.exe

    Note: It is also possible to start the server by double-clicking the executable. Starting the server through a command prompt, however, allows for observation of startup errors.

    Linux and Linux RT

    ./ni_grpc_device_server

  2. Launch the server application by specifying a path (relative or absolute) to the configuration file:

    Windows

    .\ni_grpc_device_server.exe C:\path\to\config\file\server_config.json

    Linux and Linux RT

    ./ni_grpc_device_server /path/to/config/file/server_config.json

If the server starts successfully on the port specified in the configuration file, then it will print a message to the terminal output:

Server listening on port 12345. Security is configured with insecure credentials.

Note: If port 0 is specified then the server will automatically select a port from the dynamic range. The port used will be reflected in the startup message.

If the server fails to start (i.e. a port is not specified in the configuration file) then an error message is printed in the terminal and the application will exit.

Common Server Startup Errors

  1. The datatypes of the values in the configuration file don't match the expected datatypes. For example, the port must be an integer type and not a string. The error message will provide specific details on the type requirements.
  2. The configuration file can't be found at the provided location. This error can also occur if the user lacks read permissions for the file.
  3. The server configuration file is malformed and is not in proper JSON format. Refer to the JSON configuration file in this readme for an example of the expected format.
  4. The specified port is out of the allowed port range. The solution is to select a port in the allowable range (0-65535).
  5. The specified port is already in use. The solution is to select another port or terminate the other application using the port.
  6. Security configuration errors. See Server Security Support wiki page.

Default Configuration File (insecure):

Below are the contents of a default configuration file using port 31763 and configured without SSL/TLS. A configuration file with these contents also exists in the same directory as the ni_grpc_device_server binary.

{
   "port": 31763,
   "security" : {
      "server_cert": "",
      "server_key": "",
      "root_cert": ""
   }
}

Creating a gRPC Client

Each supported driver API has a corresponding .proto file that defines the interface used by clients to interact with the NI devices connected to the server. Creating a client requires compiling the .proto into supporting files in the client's language of choice using the protocol buffer compiler protoc. For more detailed information refer to the Creating a gRPC Client wiki page.

SSL/TLS Support

The server supports both server-side TLS and mutual TLS. Security configuration is accomplished by setting the server_cert, server_key and root_cert values in the server's configuration file. The server expects the certificate files specified in the configuration file to exist in a certs folder that is located in the same directory as the configuration file being used by the server. For more detailed information on SSL/TLS support refer to the Server Security Support wiki page.

About

gRPC server providing remote access to NI device driver APIs.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 59.5%
  • Python 21.2%
  • C 18.8%
  • Other 0.5%