Expose WavePort configuration options

CHANGELOG.md

@@ -36,6 +36,9 @@ The format of this changelog is based on
     match the mesh on the boundaries specified by the donor and receiver attributes. This is
     only possible the mesh on the donor and receiver match exactly, non-matching meshes are
     not supported.
+  - Exposed configuration linear solver and eigen solver options for the wave port
+    subproblem. These can now be specified as part of the `config["Boundaries"]["WavePort"]`
+    configuration. The defaults align with the previously hardcoded values.
 
 ## [0.13.0] - 2024-05-20
 

docs/src/config/boundaries.md

@@ -349,7 +349,11 @@ corresponding coordinate system.
         "Active": <bool>,
         "Mode": <int>,
         "Offset": <float>,
-        "SolverType": <string>
+        "SolverType": <string>,
+        "MaxIts": <int>,
+        "KSPTol": <float>,
+        "EigenTol": <float>,
+        "Verbose": <int>
     },
     ...
 ]
@@ -378,6 +382,16 @@ port boundary, specified in mesh length units.
 the boundary mode for this wave port. See
 [`config["Solver"]["Eigenmode"]["Type"]`](solver.md#solver%5B%22Eigenmode%22%5D).
 
+`"MaxIts" [30]` :  Specifies the maximum number of iterations to be used in the GMRES
+solver.
+
+`"KSPTol" [1e-8]` :  Specifies the tolerance to be used in the linear solver.
+
+`"EigenTol" [1e-6]` :  Specifies the tolerance to be used in the eigenvalue solver.
+
+`"Verbose" [0]` :  Specifies the verbosity level to be used in the linear and eigensolver
+for the wave port problem.
+
 ## `boundaries["WavePortPEC"]`
 
 ```json

examples/cpw/cpw_wave_uniform.json

@@ -69,25 +69,41 @@
         "Attributes": [4],
         "Mode": 1,
         "Offset": 0.0,
-        "Excitation": true
+        "Excitation": true,
+        "MaxIts": 30,
+        "KSPTol": 1e-8,
+        "EigenTol": 1e-6,
+        "Verbose": 0
       },
       {
         "Index": 2,
         "Attributes": [5],
         "Mode": 1,
-        "Offset": 0.0
+        "Offset": 0.0,
+        "MaxIts": 30,
+        "KSPTol": 1e-8,
+        "EigenTol": 1e-6,
+        "Verbose": 0
       },
       {
         "Index": 3,
         "Attributes": [6],
         "Mode": 1,
-        "Offset": 0.0
+        "Offset": 0.0,
+        "MaxIts": 30,
+        "KSPTol": 1e-8,
+        "EigenTol": 1e-6,
+        "Verbose": 0
       },
       {
         "Index": 4,
         "Attributes": [7],
         "Mode": 1,
-        "Offset": 0.0
+        "Offset": 0.0,
+        "MaxIts": 30,
+        "KSPTol": 1e-8,
+        "EigenTol": 1e-6,
+        "Verbose": 0
       }
     ],
     "Postprocessing":

palace/models/waveportoperator.cpp

@@ -645,14 +645,11 @@ WavePortData::WavePortData(const config::WavePortData &data,
   {
     // Define the linear solver to be used for solving systems associated with the
     // generalized eigenvalue problem.
-    constexpr int ksp_print = 0;
-    constexpr double ksp_tol = 1.0e-8;
-    constexpr double ksp_max_it = 30;
-    auto gmres = std::make_unique<GmresSolver<ComplexOperator>>(port_comm, ksp_print);
+    auto gmres = std::make_unique<GmresSolver<ComplexOperator>>(port_comm, data.verbose);
     gmres->SetInitialGuess(false);
-    gmres->SetRelTol(ksp_tol);
-    gmres->SetMaxIter(ksp_max_it);
-    gmres->SetRestartDim(ksp_max_it);
+    gmres->SetRelTol(data.ksp_tol);
+    gmres->SetMaxIter(data.ksp_max_its);
+    gmres->SetRestartDim(data.ksp_max_its);
     // gmres->SetPrecSide(GmresSolverBase::PrecSide::RIGHT);
 
     config::LinearSolverData::Type pc_type = solver.linear.type;
@@ -698,7 +695,7 @@ WavePortData::WavePortData(const config::WavePortData &data,
 #if defined(MFEM_USE_SUPERLU)
             auto slu = std::make_unique<SuperLUSolver>(
                 port_comm, config::LinearSolverData::SymFactType::DEFAULT, false,
-                ksp_print - 1);
+                data.verbose - 1);
             // slu->GetSolver().SetColumnPermutation(mfem::superlu::MMD_AT_PLUS_A);
             return slu;
 #endif
@@ -708,7 +705,8 @@ WavePortData::WavePortData(const config::WavePortData &data,
 #if defined(MFEM_USE_STRUMPACK)
             auto strumpack = std::make_unique<StrumpackSolver>(
                 port_comm, config::LinearSolverData::SymFactType::DEFAULT,
-                config::LinearSolverData::CompressionType::NONE, 0.0, 0, 0, ksp_print - 1);
+                config::LinearSolverData::CompressionType::NONE, 0.0, 0, 0,
+                data.verbose - 1);
             // strumpack->SetReorderingStrategy(strumpack::ReorderingStrategy::AMD);
             return strumpack;
 #endif
@@ -718,7 +716,7 @@ WavePortData::WavePortData(const config::WavePortData &data,
 #if defined(MFEM_USE_MUMPS)
             auto mumps = std::make_unique<MumpsSolver>(
                 port_comm, mfem::MUMPSSolver::UNSYMMETRIC,
-                config::LinearSolverData::SymFactType::DEFAULT, 0.0, ksp_print - 1);
+                config::LinearSolverData::SymFactType::DEFAULT, 0.0, data.verbose - 1);
             // mumps->SetReorderingStrategy(mfem::MUMPSSolver::AMD);
             return mumps;
 #endif
@@ -770,9 +768,8 @@ WavePortData::WavePortData(const config::WavePortData &data,
       eigen = std::move(slepc);
 #endif
     }
-    constexpr double tol = 1.0e-6;
     eigen->SetNumModes(mode_idx, std::max(2 * mode_idx + 1, 5));
-    eigen->SetTol(tol);
+    eigen->SetTol(data.eig_tol);
     eigen->SetLinearSolver(*ksp);
 
     // We want to ignore evanescent modes (kₙ with large imaginary component). The

palace/utils/configfile.cpp

@@ -1114,6 +1114,10 @@ void WavePortBoundaryData::SetUp(json &boundaries)
     data.eigen_type = it->value("SolverType", data.eigen_type);
     data.excitation = it->value("Excitation", data.excitation);
     data.active = it->value("Active", data.active);
+    data.ksp_max_its = it->value("MaxIts", data.ksp_max_its);
+    data.ksp_tol = it->value("KSPTol", data.ksp_tol);
+    data.eig_tol = it->value("EigenTol", data.eig_tol);
+    data.verbose = it->value("Verbose", data.verbose);
 
     // Cleanup
     it->erase("Index");
@@ -1123,6 +1127,10 @@ void WavePortBoundaryData::SetUp(json &boundaries)
     it->erase("SolverType");
     it->erase("Excitation");
     it->erase("Active");
+    it->erase("MaxIts");
+    it->erase("KSPTol");
+    it->erase("EigenTol");
+    it->erase("Verbose");
     MFEM_VERIFY(it->empty(),
                 "Found an unsupported configuration file keyword under \"WavePort\"!\n"
                     << it->dump(2));
@@ -1137,6 +1145,10 @@ void WavePortBoundaryData::SetUp(json &boundaries)
       std::cout << "SolverType: " << data.eigen_type << '\n';
       std::cout << "Excitation: " << data.excitation << '\n';
       std::cout << "Active: " << data.active << '\n';
+      std::cout << "MaxIts: " << data.ksp_max_its << '\n';
+      std::cout << "KSPTol: " << data.ksp_tol << '\n';
+      std::cout << "EigenTol: " << data.eig_tol << '\n';
+      std::cout << "Verbose: " << data.verbose << '\n';
     }
   }
 }

palace/utils/configfile.hpp

@@ -510,6 +510,18 @@ struct WavePortData
 
   // List of boundary attributes for this wave port.
   std::vector<int> attributes = {};
+
+  // Maximum number of iterations in linear solver.
+  int ksp_max_its = 45;
+
+  // Tolerance for linear solver.
+  double ksp_tol = 1e-8;
+
+  // Tolerance for eigenvalue solver.
+  double eig_tol = 1e-6;
+
+  // Print level for linear and eigenvalue solvers.
+  int verbose = 0;
 };
 
 struct WavePortBoundaryData : public internal::DataMap<WavePortData>
@@ -674,7 +686,7 @@ struct EigenSolverData
   // Maximum iterations for eigenvalue solver.
   int max_it = -1;
 
-  // Eigensolver subspace dimension or maximum dimension before restart.
+  // Eigenvalue solver subspace dimension or maximum dimension before restart.
   int max_size = -1;
 
   // Desired number of eigenmodes.

scripts/schema/config/boundaries.json

@@ -134,7 +134,11 @@
           "Offset": { "type": "number", "minimum": 0.0 },
           "SolverType": { "type": "string" },
           "Excitation": { "type": "boolean" },
-          "Active": { "type": "boolean" }
+          "Active": { "type": "boolean" },
+          "MaxIts": { "type": "integer", "exclusiveMinimum": 0 },
+          "KSPTol": { "type": "number", "exclusiveMinimum": 0.0 },
+          "EigenTol": { "type": "number", "exclusiveMinimum": 0.0 },
+          "Verbose": { "type": "integer", "minimum": 0.0 }
         }
       }
     },