Skip to content
ci

chore(GHA): allow OIDC aws credentials #7425

Sign in to view logs

chore(GHA): allow OIDC aws credentials

chore(GHA): allow OIDC aws credentials #7425

Triggered via pull request October 14, 2024 23:49
@dougchdougch
opened #2350
oidc
Status Failure
Total duration 27m 36s
Artifacts –

ci.yml

on: pull_request
env
12s
env
rustfmt
15s
rustfmt
udeps
2m 56s
udeps
doc
2m 28s
doc
fips
8m 36s
fips
no_std
58s
no_std
compliance
39s
compliance
coverage
15m 15s
coverage
recovery-simulations
1m 21s
recovery-simulations
sims
6m 52s
sims
copyright
5s
copyright
events
54s
events
snapshots
13m 42s
snapshots
timing
1m 13s
timing
typos
11s
typos
dhat
4m 26s
dhat
xdp
3m 10s
xdp
Matrix: clippy
Matrix: dc-wireshark
Matrix: kani
Matrix: loom
Matrix: miri
Matrix: crates
Matrix: examples
Matrix: test
Fit to window
Zoom out
Zoom in

Annotations

7 errors and 200 warnings
compliance
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
timing
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
recovery-simulations
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
doc
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
dhat
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
sims
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
coverage
Credentials could not be loaded, please check your action inputs: Could not load credentials from any providers
typos
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
typos
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
compliance
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
compliance
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
compliance
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
compliance
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
events
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
events
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
events
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
events
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
no_std
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
no_std
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
no_std
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
no_std
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
recovery-simulations
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
recovery-simulations
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
recovery-simulations
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
recovery-simulations
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
miri (quic/s2n-quic-platform)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
miri (quic/s2n-quic-platform)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
miri (quic/s2n-quic-platform)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
miri (quic/s2n-quic-platform)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/rustls-provider)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/rustls-provider)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/rustls-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/rustls-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/rustls-mtls)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/rustls-mtls)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/rustls-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/rustls-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
doc
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
doc
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
doc
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
doc
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/unreliable-datagram)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/unreliable-datagram)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/unreliable-datagram)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/unreliable-datagram)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/event-framework)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/event-framework)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/event-framework)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/event-framework)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/echo)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/echo)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/echo)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/echo)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/jumbo-frame)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/jumbo-frame)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/jumbo-frame)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/jumbo-frame)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/custom-congestion-controller)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/custom-congestion-controller)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/custom-congestion-controller)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/custom-congestion-controller)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/resumption)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/resumption)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/resumption)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/resumption)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/s2n-mtls)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/s2n-mtls)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/s2n-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/s2n-mtls)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/async-client-hello-callback)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/async-client-hello-callback)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/async-client-hello-callback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/async-client-hello-callback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/dos-mitigation)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/dos-mitigation)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/dos-mitigation)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/dos-mitigation)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/turmoil-provider)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/turmoil-provider)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/turmoil-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/turmoil-provider)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
udeps
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
udeps
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1, camshaft/install@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
udeps
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
udeps
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
xdp
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
xdp
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
xdp
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
xdp
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
dc-wireshark (ubuntu-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
dc-wireshark (ubuntu-latest)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
dc-wireshark (ubuntu-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
dc-wireshark (ubuntu-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
clippy (beta)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
clippy (beta)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
clippy (beta)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
clippy (beta)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
dc-wireshark (macOS-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
dc-wireshark (macOS-latest)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
dc-wireshark (macOS-latest)
Treating wireshark as a formula. For the cask, use homebrew/cask/wireshark or specify the `--cask` flag. To silence this message, use the `--formula` flag.
dc-wireshark (macOS-latest)
pkg-config 0.29.2_3 is already installed and up-to-date. To reinstall 0.29.2_3, run: brew reinstall pkg-config
dc-wireshark (macOS-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
dc-wireshark (macOS-latest)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
clippy (stable, -D warnings)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
clippy (stable, -D warnings)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
clippy (stable, -D warnings)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
clippy (stable, -D warnings)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
dhat
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
dhat
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
dhat
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
dhat
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/post-quantum)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
examples (examples/post-quantum)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
examples (examples/post-quantum)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
examples (examples/post-quantum)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (beta, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (beta, windows-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (beta, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (beta, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (1.74.1, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (1.74.1, windows-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (1.74.1, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (1.74.1, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="", --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
sims
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
sims
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
sims
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
sims
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (nightly-2024-10-09, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (nightly-2024-10-09, windows-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (nightly-2024-10-09, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (nightly-2024-10-09, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
miri (quic/s2n-quic-core)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
miri (quic/s2n-quic-core)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
miri (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
miri (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, windows-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, windows-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, windows-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
fips
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
fips
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
fips
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
fips
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (1.74.1, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (1.74.1, macOS-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (1.74.1, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (1.74.1, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, macOS-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (nightly-2024-10-09, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (nightly-2024-10-09, macOS-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (nightly-2024-10-09, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (nightly-2024-10-09, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
snapshots
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
snapshots
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
snapshots
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
snapshots
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (beta, macOS-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (beta, macOS-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (beta, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (beta, macOS-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, ubuntu-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, native, S2N_QUIC_PLATFORM_FEATURES_OVERRIDE="mtu_disc,pktinfo,tos,so...
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (1.74.1, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (1.74.1, ubuntu-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (1.74.1, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (1.74.1, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (nightly-2024-10-09, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (nightly-2024-10-09, ubuntu-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (nightly-2024-10-09, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (nightly-2024-10-09, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (beta, ubuntu-latest, native, default)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (beta, ubuntu-latest, native, default)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (beta, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (beta, ubuntu-latest, native, default)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
coverage
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
coverage
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
coverage
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
coverage
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, x86_64-unknown-linux-musl, --features aws-lc-bindgen)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, i686-unknown-linux-gnu)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
loom (quic/s2n-quic-core)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
loom (quic/s2n-quic-core)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
loom (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
loom (quic/s2n-quic-core)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The following actions uses node12 which is deprecated and will be forced to run on node16: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The following actions use a deprecated Node.js version and will be forced to run on node20: camshaft/install@v1, camshaft/rust-cache@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
test (stable, ubuntu-latest, aarch64-unknown-linux-gnu, --exclude s2n-quic-dc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/