A-plus RST tools

Provides tools to publish RST course content for mooc-grader and a-plus.

• http://www.sphinx-doc.org/en/stable/
• http://matplotlib.org/sampledoc/
• http://docutils.sourceforge.net/rst.html

A-plus RST tools comprise a set of Sphinx extensions. Sphinx is a tool for writing documentation mainly in the reStructuredText (RST) markup language, though it also supports other markup languages such as markdown via extensions. Sphinx itself extends the Docutils RST parser and compiler. A-plus RST tools support the following Sphinx versions:

• a-plus-rst-tools v1.4 support Sphinx v4.1.
• a-plus-rst-tools v1.3 and earlier support Sphinx v1.6.

Creating a new course

We recommend to start with a fork from the course-templates repository from Github.

git clone --recursive https://github.com/apluslms/aplus-course-template.git

Read the README in that repository in order to learn how to build and run the course using Docker containers (recommended). If you do not use containers, you need Python modules Sphinx and yaml in order to compile the RST source into HTML and YAML course configuration files.

pip install sphinx~=4.1.2 PyYAML~=5.4.1

The course is compiled with make (when no containers are used).

make html

Adding tools to an existing course

The tools can be added into a repository as a submodule.

git submodule add https://github.com/apluslms/a-plus-rst-tools.git a-plus-rst-tools
git submodule init
git submodule update

The course repository also needs certain configuration files for the RST tools and Sphinx. The following files can be copied from the course-templates repository to get started: apps.meta, conf.py, course.yml, docker-compile.sh, docker-compose.yml and docker-up.sh. The course-templates README describes how to build and run the course. The course directory should have a file index.rst that defines the structure of the RST contents.

In order to build the course without any Docker containers, you install the Python modules Sphinx and yaml as well as create the Sphinx configuration file conf.py.

pip install sphinx~=4.1.2 PyYAML~=5.4.1
sphinx-quickstart
cp a-plus-rst-tools/conf.py .  # a similar conf.py is available in course-templates as well

Upgrading the tools

The tools can be upgraded to a newer version after the initial installation. The command git submodule update updates or resets the submodule to the version committed in the course repository. It should be executed after a git pull if somebody has pushed a different version of the submodule to the course repository. One can push the newest version of the a-plus-rst-tools to the course repository by running the following commands:

cd my-course-repository  # start in the course repository
cd a-plus-rst-tools
git checkout master
git pull
cd ..  # to the course repository
git add a-plus-rst-tools
git commit -m 'Update a-plus-rst-tools'
git push

Special Sphinx configurations (conf.py)

The file conf.py in the root directory of the project is a configuration file for the Sphinx RST compiler. The a-plus-rst-tools add some new configuration values to the conf.py, for example, to define the course opening time. The following Python snippet briefly shows these configurations.

# -- Aplus configuration --------------------------------------------------
course_open_date = '2016-06-01'
course_close_date = '2020-06-06'
questionnaire_default_submissions = 5
program_default_submissions = 10
default_min_group_size = 1
default_max_group_size = 1
use_wide_column = True # should chapters use full or narrow column width?
static_host = os.environ.get('STATIC_CONTENT_HOST')
course_key = os.environ.get('COURSE_KEY')
course_id = os.environ.get('COURSE_ID')

course_title = 'Basic course in programming' # can be defined in index.rst instead
submit_title = '{config_title}'
# submit_title: used when you need to modify the default structure of the titles
# in submit exercises. The string format keys config_title and key_title are available.
default_late_date = '2019-01-31 23:59' # default late close time for modules
default_late_penalty = 0.5 # default late penalty for modules

append_content = [] # Hack for modifying the YAML configuration at the end of the build.
# A list of file paths to YAML files that should be merged with the main index.yaml.
# This can add new keys or modify existing values in the index.
# The main index.yaml is built from the RST and YAML sources and contains
# all the modules, chapters, and exercises of the course.

default_exercise_url = f"https://somedomain/{course_id}/{{key}}"
# Note that f"https://somedomain/{course_id}/{{key}}" directly evaluates to
# something like "https://somedomain/3/{key}".
# The default exercise URL in the exercise service.
# This is optional (omit or set to None). See the url option in the section
# "common for questionnaires and submittable exercises" below for more information.

default_configure_url = "{scheme}://{netloc}/configure"
# The default configuration URL.
# This is optional (omit or set to None). See the configure-url option in the section
# "common for questionnaires and submittable exercises" below for more information.

course_configures = []
# What files to send and where. This can be used to send additional course files
# to the grading services. E.g.
# course_configures = [
#     {
#         "url": "<grader domain>/configure",
#         "files": {
#             "fileongrader.txt": "file in repo.txt",
#         },
#     },
# ]
# sends the file "file in repo.txt" to the grader but renamed as "fileongrader.txt"

unprotected_paths = []
# List of static paths that should be accessible without login, e.g. downloadable files.
# _downloads, _static and _images are always added by Git Manager.
# The paths are relative to the static_dir in the output yaml. static_dir is generally
# the html output directory, i.e. _build/html.

override = {
    'submit': {
        'max_submissions': 99,
    },
}
# Hack for modifying exercise configurations based on the category.
# Category keys are keys in the override dict. The exercise configurations
# are updated at the end with the dict corresponding to the category.

category_names = {'submit': 'Programming exercises'}
# Dict from category keys to category names.
# This can be used to set visible category names.
# If no names are set, the names default to the category keys themselves.
# Default category keys in often-used RST directives include
# 'submit', 'questionnaire', 'feedback', 'chapter' and 'active elements'.
# category_names may also set multilingual names:
category_names = {
    'chapter': {
        'fi': 'Luku',
        'en': 'Chapter',
    },
    'feedback': {
        'fi': 'Palaute',
        'en': 'Feedback',
    },
    'submit': {
        'fi': 'Pisteytetty',
        'en': 'Graded',
    },
    'questionnaire': {
        'fi': 'Monivalintakysely',
        'en': 'Questionnaire',
    },
}

# New categories setting in A-plus-rst-tools v1.6.
# Category settings may be modified here.
# Map of category keys to dictionaries that are used to
# override the default category settings.
categories = {
    'submit': {
        'accept_unofficial_submits': True, # allow unofficial submissions
    },
    'feedback': {
        'status': 'ready', # display the category points bar
    },
}

static_host = 'http://localhost:8080/static/default'
# This overwrites the beginning of URLs in links to static materials.
# It is useful if the A+ frontend is otherwise unable to fix relative URLs
# in the contents that should refer to the backend server, not A+.

ae_default_submissions = 0 # default max submissions for active elements
skip_language_inconsistencies = False # for debugging multilanguage courses

# Default values for allow assistant viewing and grading settings in exercises
allow_assistant_viewing = True # May assistants view submissions?
allow_assistant_grading = False # May assistants grade submissions?

# Default rules for revealing submission feedback and model solutions.
# Can be overridden in module aplusmeta directive, or in questionnaire/submit
# directives.
# See instructions in chapter 'Defining reveal rules'.
reveal_submission_feedback = 'immediate'
reveal_model_solutions = 'deadline'

# List of JavaScript and CSS URLs for the A+ head URLs course setting.
# A+ adds these to every course page. These can also be paths to static files,
# e.g. _static/course.js (only on gitmanager)
course_head_urls = [
    "https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/MathJax.js?config=TeX-AMS_CHTML-full",
]

# a-plus-rst-tools try to detect the language of the chapter from the language
# suffix in the file name, e.g., chapter_en.rst. This detection can be disabled
# with this setting. If the course is multilingual, but the chapter files do not
# have language suffixes, it may be best to disable this. The detected language
# is used to translate strings that are part of a-plus-rst-tools and Sphinx.
# The language may also be detected from a language subdirectory (such as en)
# under the module directory, but using language subdirectories is not recommended.
# If the language can not be detected from the filename or the subdirectory,
# then the language set in conf.py is not modified.
enable_rst_file_language_detection = True

# Add the language suffix to doc and ref link targets as well as ref link
# labels in multilingual courses. This can only be used in multilingual courses
# that include the language suffix "_en" in each chapter RST file, that is,
# filenames are like chapter1_en.rst and chapter1_fi.rst.
# It is more convenient to write doc links without manually added language
# suffixes, e.g., :doc:`chapter1` instead of :doc:`chapter1_en`. This function
# adds the language suffixes automatically since Sphinx can not compile
# the link if the target file does not exist.
# Likewise, it is convenient to write identical ref link labels in the same
# place in all language versions of the chapter. Sphinx requires that labels
# are unique, thus language suffixes are automatically appended to the labels.
# The ref links in the RST chapters also refer to the labels without the
# language suffixes. The language suffixes are added automatically to
# the ref links.
# If the course uses a different format in links or for some other reason links
# need to stay untouched, set enable_doc_link_multilang_suffix_correction to
# False in order to disable doc link modifications and
# enable_ref_link_multilang_suffix_correction to False in order to disable
# ref link and label modifications.
enable_doc_link_multilang_suffix_correction = True
enable_ref_link_multilang_suffix_correction = True

# If True, autosave is enabled for all questionnaires in this course. A draft is
# saved periodically while a student types their answer, and the latest draft
# is automatically restored if the student leaves the exercise page and comes
# back later. A draft does not count as a submission and does not affect
# grading. Autosave can also be enabled for individual questionnaires.
enable_autosave = False

# If True, do not display a confirmation dialog when attempting to submit
# identical/duplicate answers to questionnaires or submit exercises.
disable_duplicate_check = False

Sphinx configurations that should be modified with a-plus-rst-tools

The Python modules that define Sphinx extensions (a setup function) must be in the Python path (i.e., appended to the sys.path). At least the root of the a-plus-rst-tools must be added, but the aplus_setup module does not define all of the extensions available in the RST tools. The extensions must be activated for Sphinx in the extensions list.

The RST tools defines a custom theme for the HTML builder and it must be activated in the conf.py. The standard Sphinx themes produce HTML that does not work well in A+ chapters.

The following settings are already defined in the template conf.py (in the course-templates).

sys.path.append(os.path.abspath('a-plus-rst-tools'))
sys.path.append(os.path.abspath('a-plus-rst-tools/directives'))

extensions = [
    'sphinx.ext.mathjax', # optional
    'aplus_setup',
]

html_theme = 'aplus'
html_theme_options = {
    'use_wide_column': use_wide_column,
}
html_theme_path = ['a-plus-rst-tools/theme']

A+ course settings

Most A+ course settings can be set in the main index.rst of the course (master_doc in conf.py) since A+ version 1.5, autumn 2019. The course settings are defined as a field list at the start of the index.rst file before any section (heading). Field lists are basically just key-value pairs (for background, see syntax in Docutils and Sphinx). The keys for the A+ course settings are listed below:

:course-start: 2019-08-01 12:00:00
:course-end: 2025-12-31 13:00:00
:course-default-late: 2026-06-01 15:00
:course-default-late-penalty: 0.60
:course-head-urls:
    - https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/MathJax.js?config=TeX-MML-AM_CHTML
:course-description: <p>Description about the course for the course front page.</p>
    <p>More text.</p>
    <p>HTML formatting is allowed.</p>
:course-footer: <p>This is the course <b>footer</b> for the front page.</p>
:enrollment-start: 2019-09-01 11:00
:enrollment-end: 2020-01-01 12:00
:lifesupport-time: 2026-12-31 20:00
:archive-time: 2026-12-31 20:00
:view-content-to: enrolled
:enrollment-audience: internal
:index-mode: toc
:content-numbering: arabic
:module-numbering: arabic
:numerate-ignoring-modules: False
:questionnaire-default-reveal-model-at-max-submissions: False
:questionnaire-default-show-model: False
:unprotected_paths: "this/is/parsed" "into/a/list/of/paths" "like/a/shell/command"

Some fields require a value from specific choices (see also the MOOC-grader documentation about the index.yaml file):

• view-content-to: enrolled, enrollment_audience, all_registered, public
• enrollment-audience: internal, external, all
• index-mode: results, toc, last, experimental
• content-numbering and module-numbering: none, arabic, roman, hidden

List of directives and examples

1. Common options for questionnaires and submittable exercises

• url: the URL of the exercise in the assessment service. This is optional. If omitted, it is set according to default_exercise_url. If that is omitted as well, it is set by Git Manager to the value returned by the service at configure-url (which should return the correct URL). Supports formatting where {key} is replaced with the exercise key. For example, "https://grader/{key}".
• configure-url: the URL that is used to configure the exercises on a grader. It is dependent on the grading service used, and is <domain>/configure for MOOC-grader. This is optional. If omitted, it is set according to default_configure_url. If that is omitted as well, it is set by Git Manager to the Git Manager instance's default value (MOOC-grader for Aalto). Supports formatting with {scheme}, {netloc}, {path}, {params}, {query} and {fragment} where the variables are parsed from the url option as <scheme>://<netloc>/<path>;<params>?<query>#<fragment>. For example, "{scheme}://{netloc}/configure".
• configure-files: Additional files to be sent to the grader as part of the exercise. A comma separated list of mappings that define the file path on the grader and in the git repository. The paths in a mapping are separated by a colon :. If the file need not be renamed, the mapping may contain only the path in the repo. For example, extra/grader.txt:configs/repo.txt,files/not-renamed.txt sends the file configs/repo.txt from the git repo to the grader path extra/grader.txt and the file files/not-renamed.txt is copied to the same path. These additional files could be, for example, HTML template files.
• no-override: If set, the conf.py override setting is ignored.

2. Graded questionnaire

The questionnaire directive arguments define the exercise key and optional max points with the difficulty. For example, .. questionnaire:: 1 A50 sets key 1, max points 50 and difficulty A. If not set in the directive arguments, the max points will be set to the sum of the question points. Setting the difficulty is optional and it can be set even if the max points aren't defined in the argument. The questionnaire directive accepts the following options:

• submissions: max submissions (set to 0 to remove submission limit)
• points-to-pass: points to pass
• feedback: If set, assumes the defaults for a feedback questionnaire
• title: exercise title
• pick-randomly: integer. The questionnaire selects N questions randomly for the user instead of showing all questions. The random selection changes after the user submits, but persists without changes if the user just reloads the web page. (The questionnaire should not include any static text fields between the questions since the text fields are part of the pool from which the questions are randomly selected.)
• preserve-questions-between-attempts: If set, the questions in a pick-randomly questionnaire are preserved between submission attempts (instead of being resampled after each attempt).
• category: exercise category
• status: exercise status (default "unlisted"). See available statuses.
• reveal-model-at-max-submissions: The questionnaire feedback reveals the model solution after the user has consumed all submission attempts. The feedback may reveal the model solution even before the exercise deadline. Note that A+ has a separate feature for showing exercise model solutions after the deadline. Can be set to true or false. The default value can be set in index.rst with the field questionnaire-default-reveal-model-at-max-submissions. By default false. Don't use this option together with reveal-model-solutions.
• show-model: Students may open the model solution in A+ after the module deadline. Can be set to true or false. The default value can be set in index.rst with the field questionnaire-default-show-model. By default true.
• allow-assistant-viewing: Allows assistants to view the submissions of the students. Can be set to true or false. Overrides any options set in the conf.py or config.yaml files.
• allow-assistant-grading: Allows assistants to grade the submissions of the students. Can be set to true or false. Overrides any options set in the conf.py or config.yaml files.
• reveal-submission-feedback: rule for revealing submission feedback. See instructions.
• reveal-model-solutions: rule for revealing model solutions. See instructions.
• grading-mode: which submission determines the final score for this exercise ("best" or "last"). Defaults to "best". If delayed feedback is used (reveal-submission-feedback is set to something other than "immediate"), defaults to "last".
• autosave: If set, autosave is enabled for this exercise. A draft is saved periodically while a student types their answer, and the latest draft is automatically restored if the student leaves the exercise page and comes back later. A draft does not count as a submission and does not affect grading. Autosave can also be enabled for the entire course in conf.py.
• disable-duplicate-check: If set, do not display a confirmation dialog when attempting to submit identical/duplicate answers to a questionnaire.

The contents of the questionnaire directive define the questions and possible instructions to students.

Question directives: multiple choice and text input

The question directives pick-one, pick-any, and freetext take the points of the question as the first argument. If the questionnaire's max points are set, the sum of the question points should be equal to them. The question directives accept the following options:

• class: CSS class
• required: If set, the question is required and empty answers are rejected
• key: a manually set key for the question. This affects the HTML input element and the key in the submission data. If no key is set, note that automatically added keys change when the order and amount of questions is modified.

The question directives may define instructions. After the instructions, the contents of the directive define the choices, the correct solution, and possible hints. The hints are targeted to specific choices and they are shown after answering. The format of the hints is value § Feedback text. The value is the student's submission and it may be prepended with ! in order to show the feedback when the student did not answer that value. The special value %100% shows the hint when the student answers the question correctly. In freetext questions, the value may be prepended with regexp: in order to use regular expressions for matching the student's submission.

Correct answers in pick-one and pick-any directives are marked with *. A pick-any question may have neutral options, which are marked with ?. Neutral options are always counted as correct, whether the student selected them or not. Initially selected options may be set with +. The initially selected options are pre-selected when the exercise is loaded. The + character is written before * or ? if they are combined.

Multiple choice: pick-any and pick-one

The pick-any directive has following options in addition to the common question options:

• partial-points: When set, the question awards points for partially correct submissions. Zero points are awarded to answers that mark half or less of the options (checkboxes) correctly. The points scale linearly to the maximum points when more than half of the options are answered correctly.
• randomized: When this option is used, a subset of the answer choices (checkboxes) is randomly selected for the user. The random selection changes after the user submits, but persists when the user just reloads the web page. The value of the option is an integer, which is the number of choices to randomly select from all of the defined answer choices in the question. The option correct-count should be also set when this option is used.
• correct-count: The number of correct answer choices (checkboxes) to randomly select in the randomized pick-any question. This option is used with the randomized option.
• structured-randomized: When this option is used, a subset of the answer choices (checkboxes) is randomly selected for the user, based on the provided structure. The random selection changes after the user submits, but persists when the user just reloads the web page. The value of the option is a string expression of the format (pick X answer-choice-1 answer-choice-2 ...) (pick Y answer-choice-3 answer-choice-4 ...) ..., where X and Y are the number of choices to randomly select from their respective groups of answer choices. Example: (pick 1 a b) (pick 2 c d e f) (pick 1 g h). The string expression may also include nested pick groups, e.g., (pick 3 a b (pick 1 c d) e f). In this example, one of c or d is randomly picked first, and then three answer choices are randomly picked from the pool of a, b, c, e, and f or a, b, d, e, and f, depending how the choice between c and d played out. The option correct-count should not be set when this option is used, since the number of correct answer choices can be controlled using the structure.
• preserve-questions-between-attempts: If set, the answer choices in a randomized question are preserved between submission attempts (instead of being resampled after each attempt).
• checkbox-feedback: If set, the feedback for a selected checkbox is rendered under the checkbox instead of the list under the question. This makes it obvious to the student which checkbox triggered the feedback. Even if this is set, the inverse feedback (!a, when option is not selected) is still rendered under the question after all checkboxes. By default, all feedback is rendered under the question.

The pick-one questions are rendered with HTML radio buttons by default, but a dropdown (select) element may be used with the dropdown option.

Text input: freetext

The freetext directive also accepts the following options in addition to the common question options:

• length: (horizontal) length for the HTML text input
• height: If greater than 1, the textarea HTML element is used. Otherwise, a text input is used.
• Other options are defined in the code, but they mainly affect the CSS classes and they were implemented for very narrow usecases.

The freetext directive accepts a second positional argument after the points. It defines the compare method for the model solution. A textual input can be compared with the model solution as

• int,
• float,
• string,
• subdiff,
• regexp or
• unsortedchars (unsorted character set).

The regexp compare method takes the correct answer as a regular expression and tries to match the submission with it. It is possible to provide a separate display model solution that is shown to the students in the model solution. Otherwise, the students would be shown the whole regular expression. The display model solution is added after the model regular expression with the special characters °=°. For example,

/cat|dog/ °=° dog

The subdiff method works almost like the string method, but it can have multiple correct answers separated with | and if the answer is incorrect, it shows the difference of the answer to each correct answer as a hint. For example, when the correct answer is 'cat' and the student answers 'car', the student receives feedback Correct parts in your answer: ca-.

String methods have comparison modifiers that are separated with a hyphen. For example, .. freetext:: 30 string-ignorews-ignorequotes. The following modifiers are available:

• ignorews: ignore white space (applies to regexp too)
• ignorequotes: iqnore "quotes" around
• requirecase: require identical lower and upper cases (only with the string and subdiff types)
• ignorerepl: ignore REPL prefixes
• ignoreparenthesis: ignore parenthesis "( )"

The body of the freetext question is expected to be its model solution. However, the question instructions can be written inside the body before the model answer. The instructions and the model solution must be separated with an empty line.

If the questionnaire has the feedback option set, freetext questions may not have a model solution and the body of the question is shown as the question instructions.

Questionnaire example in RST markup

.. questionnaire:: 1 A
  :submissions: 4
  :points-to-pass: 0

  This is a questionnaire with the key `1` that grants at maximum 70 points
  of difficulty A. Students can make at most 4 submissions.
  This exercise is marked passed when 0 points are reached (the default).

  .. pick-one:: 10
    :required:

    What is 1+1?

    a. 1
    *b. 2
    c. 3

    !b § Count again!
    b § That is correct!
    c § Too much

  (Hints can be included or omitted in any question.)

  .. pick-one:: 10
    :required:
    :dropdown:

    What is 1+2?

    +0. 0
    1. 1
    2. 2
    *3. 3

  .. pick-any:: 10
    :partial-points:

    Pick the two **first**. Since the 'partial-points' option is set,
    some points are awarded with a partially correct answer. If either one of the
    correct options is not chosen or one of the wrong fields is chosen, 5 points are
    still awarded. Selecting the last neutral option does not affect the points.

    +*a. this is the **first**
    *b. this is the **second**
    c. this is the **third**
    d. this is the **fourth**
    ?e. choosing this does not affect the granted points

  .. freetext:: 30 string-ignorews-ignorequotes-requirecase
    :length: 10

    A textual input can be compared with the model solution as integer, float or string.
    Here the correct answer is "test". Surrounding quotes are ignored in the solution
    as well as whitespace everywhere (modifiers ignorequotes and ignorews).

    test
    !test § Follow the instruction.
    regexp:Test|TEST § Use the lower case!

  .. freetext:: 10 regexp

    This question accepts either "red" or "blue" as the correct answer.
    The submission is graded by a regular expression.
    When the student is shown the model solution, it shows `red`.

    red|blue °=° red

3. Feedback questionnaire

A feedback questionnaire is almost like a graded questionnaire. When the feedback option is set, the questionnaire uses the feedback category and CSS class by default. Feedback questionnaires always grant full points if all of the required questions are answered. The questionnaire options chapter-feedback, weekly-feedback, appendix-feedback, and course-feedback use a different CSS class (with the same name as the option). If points are not specified, they are set to zero. The feedback option can be set only to one questionnaire in an RST file because the exercise key is then hardcoded to feedback.

The freetext questions are not expected to have a model solution, in essence the body of the freetext question will be shown as the question instructions.

The question directives agree-item and agree-item-generate create questions with a 1-5 Likert scale. They take a title as the only positional argument and they accept the options key, required, and class like the other question directives. Agree-item-generate also requires the option config that defines the path to a config.yaml file. It is used to generate multiple agree items. See the example below. (The agree item directives are quite limited and you could just use the pick-one directive instead.)

Note that the mooc-jutut service provides a more advanced method for reading and responding to feedback. In order to use it, you still define the feedback questionnaire in RST, but you must also set the service URL of the questionnaire exercise to the mooc-jutut server. The URL can be set by using the override option in the project conf.py file. For example:

override = {
    'feedback': {
        'url': 'https://jutut-server.org/feedback/coursekey/{key}',
    },
}

.. questionnaire::
  :feedback:

  Please fill in this feedback questionnaire.

  .. freetext::
    :required:
    :length: 100
    :height: 4
    :class: my-input-class

    What do you think now?

  .. agree-item:: Did it work for you?

  .. agree-item-generate:: Generated agree item with $title
    :config: path/to/config.yaml

The config.yaml file used by agree-item-generate may use the following keys:

- title: My title 1
  info: Additional information 1 here
  image_url: http://localhost:8080/static/default/_images/myimage.png
- title: My title 2
  info: Additional information 2 here
  image_url: http://localhost:8080/static/default/_images/myimage.png
- title: My title 3
  info: Additional information 3 here
  image_url: http://localhost:8080/static/default/_images/myimage.png

4. Submittable exercise

These types of exercises are configured separately for the MOOC grader by linking a YAML configuration file with the config option. Some settings may also be defined directly with the directive options. The directive will attach the exercise at this position in the content chapter. Its arguments define the exercise key and max points with the optional difficulty. The instructions can be written in the body of the submit directive. The body supports RST syntax. If the instructions field is also given in the config.yaml, the body of the submit directive will be prioritized. It accepts the following options:

• config: path to the YAML configuration file
• submissions: max submissions (set to 0 to remove submission limit)
• points-to-pass: points to pass (default zero)
• class: CSS class(es)
• title: exercise title
• category: exercise category (default "submit")
• status: exercise status (default "unlisted"). See available statuses.
• ajax: If set, the A+ chapter does not attach any JavaScript event listeners to the exercise and the exercise JS may control the submission itself. See the chapter content documentation (the HTML attribute data-aplus-ajax).
• allow-assistant-viewing: Allows assistants to view the submissions of the students. Can be set to true or false. Overrides any options set in the conf.py or config.yaml files.
• allow-assistant-grading: Allows assistants to grade the submissions of the students. Can be set to true or false. Overrides any options set in the conf.py or config.yaml files.
• reveal-submission-feedback: rule for revealing submission feedback. See instructions.
• reveal-model-solutions: rule for revealing model solutions. See instructions.
• grading-mode: which submission determines the final score for this exercise ("best" or "last"). Defaults to "best". If delayed feedback is used (reveal-submission-feedback is set to something other than "immediate"), defaults to "last".
• disable-duplicate-check: If set, do not display a confirmation dialog when attempting to submit identical/duplicate answers to an exercise.
• quiz: If set, the exercise feedback will take the place of the exercise instructions. This makes sense for questionnaires since their feedback contains the submission form. In RST, you would usually define questionnaires with the questionnaire directive, but they can also be defined in a YAML file. See the chapter content documentation (the HTML attribute data-aplus-quiz).
• url: the service URL of the exercise. Use this if the URL must, for example, refer to another server.
• radar_tokenizer: See the Radar similarity analysis tool
• radar_minimum_match_tokens: See the Radar similarity analysis tool
• lti: See LTI exercises in the next section. This option defines the label of the LTI 1.1 service that must be configured in the A+ site beforehand.
• lti_resource_link_id: LTI exercise key. Only available with LTI 1.1.
• lti_context_id: LTI course key. Only available with LTI 1.1.
• lti_open_in_iframe: Open the exercise in an iframe inside the A+ page instead of a new window. This option does not take any parameters, and is available both with LTI 1.1 and LTI 1.3.
• lti_aplus_get_and_post: The exercise uses the A+ protocol to connect to the service. The LTI launch parameters are appended to the A+ protocol parameters. This does not work with standard LTI services. This option does not take any parameters, and is only available with LTI 1.1.
• lti1p3: Defines the label of the LTI 1.3 service that must be configured beforehand.
• lti_custom: Custom service-specific parameters. Usage depends on the target service. Only available with LTI 1.3.

.. submit:: 2 A100
  :submissions: 100
  :config: exercises/hello_python/config.yaml

  This will be shown in aplus as the instructions.

5. External exercise (LTI 1.1 or LTI 1.3)

This exercise opens an external tool via the LTI launch protocol. The LTI service must be configured beforehand in A+ by an administrator. The lti option refers to the label of the LTI 1.1 service, and lti1p3 refers to the label of the LTI 1.3 service. The url option may exclude the domain of the service URL since the domain must be equal to the URL defined in the LTI service anyway. There are two ways to define LTI exercise:

• Using the config.yaml file linked with the config option and defining LTI options there. In this case, all LTI options written in the submit directive will be ignored.
• Writing LTI options in the submit directive. Remark that in this case the submit directive must not have the config option set.

In LTI excercises, the instructions cannot be written in the body of the submit directive. Below is an example of an LTI 1.1 service:

.. submit:: 3 B50
  :lti: Rubyric
  :url: /aplus/123
  :lti_resource_link_id: example1

An LTI 1.3 exercise definition looks, for example, as follows:

.. submit:: exercise 10
  :lti1p3: ExternalService
  :lti_open_in_iframe:
  :lti_custom: id=5fd14e7b10b6

6. Meta (exercise round settings)

The aplusmeta directive is used to define module (exercise round) settings. It should be defined in the RST file that defines the toctree of the module (module index). Furthermore, it may be used in chapters to hide them (i.e., set status hidden) with the hidden option or to set the chapter audience with the audience option.

The aplusmeta directive does not have any content and it accepts the following options:

• open-time: module open time, e.g., 2019-01-31 23:59:00 (the time defaults to 12:00 if excluded)
• close-time: module close time
• late-time: module late submission time
• late-penalty: module late penalty between 0-1, e.g., 0.5 (50%)
• read-open-time: module read open time. The reading materials can be opened for reading before the exercises are opened for submissions. The exercise descriptions are hidden and submissions are disabled between the read open time and open time.
• audience: chapter audience (internal, external, or registered. Defaults to the course audience)
• hidden: If set, set status hidden for the module or chapter
• points-to-pass: module points to pass
• introduction: module introduction as an HTML string
• reveal-submission-feedback: default rule for revealing submission feedback. Can be overridden per exercise. See instructions.
• reveal-model-solutions: default rule for revealing model solutions. Can be overridden per exercise. See instructions.
• model-answer: chapter that is used as the model answer for the module in the format <module_key>/<chapter_key>.
  • Typically, the module_key is the name of the directory in which the module index and chapter RST files are located.
  • Likewise, chapter_key is the name of the chapter RST file without the filename extension. If there is a language suffix (_en, _fi) in the filename, the suffix is also excluded from the chapter key.
  • If you view the chapter in A+, you can see the correct keys in the URL of the A+ chapter page.
• reveal-module-model-solution: rule for revealing the module model solution. See instructions.

Example module index.rst file:

Module 1 - Introduction
=======================

.. toctree::

  introduction
  topic

.. aplusmeta::
  :open-time: 2020-09-01 10:00
  :close-time: 2020-09-30 14:00

Alternatively, one can also define these options in the conf.py file of the course in the following way.

1. Add the aplusmeta_substitutions variable in the conf.py file.

    aplusmeta_substitutions = {
        'open01': '2020-09-10 10:01'
    }

This variable is a dictionary where keys are strings and values are dates in the usual format (see above). In the example above, you have defined a shortcut text "open01" for date "2020-09-10 10:01".

2. Use the shortcut texts in the aplusmeta directive in a module index.rst:

    .. aplusmeta::
      :open-time: open01
      :close-time: 2019-09-20 12:00
      :late-time: 2019-12-20 09:00

3. When the course is compiled, the aplusmeta directive looks for substitution strings in the aplusmeta_substitutions dictionary. The substitutions can be named freely as long as they are not RST markup (e.g. '|open01|' will not work). The substitutions can be used with any option of the meta directive.

7. Active element input

This creates an input field for active element.

More active element examples can be found at https://version.aalto.fi/gitlab/piitulr1/active-element-example

Tools for making clickable active element inputs: https://version.aalto.fi/gitlab/piitulr1/click-input-editor

.. ae-input:: id-for-input
  :title: title of the input (displayed on the html page)
  :default: default value for the input (displayed when the user has not
            submitted a solution)
  :class: Any css classes that the active element exercise div should have
          separated by a space (class1 class2 class3).
          In the example course css-file:
          - classes "active-element" and "ae-input" are used to style the
            input element and can be modified as needed.
          - classes "left" and "right" can be used to float the box left or
            right, or "center" to align it centered.
  :width: can be used to set the width of the element
  :height: can be used to set the height of the input textarea
           (default with classes "active element" and "ae-input" is 150px)
  :clear: "both" forces the element to a new line, "left" ("right") allows
          no floating elements on the left (right)
  :type: use "file" for file inputs, "clickable" for clickable inputs, and
         "dropdown" for dropdown. For dropdowns, the available options should
         be listed after the type indicating "dropdown" in this
         format: "dropdown:option1,option2,option3"
  :file: (only for type clickable) path to the html file that contains
         the default clickable input

8. Active element output

This creates an output field for active element.

More active element examples can be found at https://version.aalto.fi/gitlab/piitulr1/active-element-example

.. ae-output:: key-for-output
  :config (required): path to the exercise configuration file
  :inputs (required): ids of the input elements required for the output
  :title: title of the output element
  :class: Any css classes that the active element exercise div should have
          separated by a space (class1 class2 class3).
          In the example css-file:
          - class "active-element" is used to style the
            input element and can be modified as needed.
          - classes "left" and "right" can be used to float the box left or
            right, or "center" to align it centered.
  :width: can be used to set the width of the element
  :height: can be used to set the height of the output div (default
           with class "active element" is 150px)
  :clear: "both" forces the element to a new line, "left" ("right") allows
          no floating elements on the left (right)
  :type: default type is text; for image (png) outputs use "image"
  :submissions: number of allowed submissions (default is unlimited for
                active elements)
  :scale-size: no value; if this option is present, the output element
               height will scale to match content that has a defined height
  :status: exercise status (default "unlisted"). See available [statuses](#list-of-exercise-statuses).

9. Hidden block

Directive for creating hidden content blocks. The content can be shown/hidden by clicking the link. (This uses the Bootstrap collapse component.)

.. hidden-block:: name (required)
  :label: Optional text for the show/hide link (default Show/Hide)
  :visible: # if this flag is present, the collapsible div starts out visible

  Hidden content here.

10. Point of interest

Directive for creating a "point of interest" summary block. This extension must be activated separately in the project conf.py (extensions = ["aplus_setup", "point_of_interest"]). A point of interest is mostly like a normal admonition ("coloured info box"), but they are also linked to each other with next/previous links. The links enable the user to quickly navigate between the points of interest.

Point of interests may also be used to generate separate lecture slides (not directly included in the A+ content chapters). This requires a separate tool called Presentation maker.

More information about Columns and rows.

.. point-of-interest:: Title text
  :id: unique id, if not supplied a random id will be generated
  :previous: id of previous point-of-interest (optional)
  :next: id of next point-of-interest (optional)
  :hidden: (if this flag is present, the content of this poi is hidden by default)
  :class: any additional css classes
  :height: fixed height in pixels
  :bgimg: path to background image
  :columns: relative widths of poi content columns (e.e. 2 3 3) Deprecated, since it is used with the newcol columns
  :not_in_slides: a flag used with the presentation maker. This POI does not show in the slides if this is defined.
  :not_in_book: If this flag is given, this POI does not appear in the A+ content chapter.
  :no_poi_box: Removes surrounding box and navigation

  Content of point-of-interest here.

  Use row and column directives to start a new row and column. More information about columns and rows in this documentation.
  Note: ::newcol columns are deprecated.

  .. row::

     .. column::
       :width: 6
       :column-class: bg-success

       Column content 1

     .. column::
       :width: 6
       :column-class: bg-warning

       Column content 2. Here goes the content.

11. Annotated code blocks

Code blocks may be annotated with comments for specific lines. This extension must be activated separately in the project by adding the following settings to the conf.py file located in the root of your course directory.

extensions = ["aplus_setup", "annotated"]
...
include_annotated_js = True
include_annotated_css = True

This directive requires a custom JavaScript and CSS implementation for highlighting the annotated code when the mouse hover events of the annotations are fired in the web browser. Therefore, we have added a default implementation that allow you to make use of the annotated directive without having to write your own JS or CSS. However, if you want to remove the default JavaScript and CSS implementation, you can change the value of include_annotated_js and include_annotated_css to False. By doing so, you could write your own CSS and JS code to interact with the annotated directive.

.. annotated::

  .. code-block:: python

    1«def func(param):»
        2«return None»

    3«x = "hello"»
    4«print(x + " world")»
    print("Last line without any annotation")

  Annotations may be written inline within text using square brackets (``[ ]``)
  or as blocks with the ``.. annotation::`` directive.
  Inline annotations look like this: [[[define a **function** named ``func`` that takes one parameter *param*]]].
  You can add a ``data-replacement`` attribute to the HTML code of the inline
  annotation too like this:
  [[[**return statement** ends the function execution and returns a value to the caller¶content for the replacement attribute]]]

  It is up to your custom JavaScript code to do something with the data-replacement
  attribute, but the intended use-case is that the content of the annotated code
  would change when the user hovers over the annotation with the mouse.

  The inline annotations are always numbered before the block annotations.
  This affects the numbers in the annotated code block
  (the sections like ``1«def func(param):»``).

  .. annotation:: optional content for the data-replacement HTML attribute

    Assign a string to the variable x.

  .. annotation::

    The parameters to the function call are evaluated first.

12. Code blocks with line references

With the lineref-code-block, you may add links from the chapter contents to specific lines of the code block. You define labels enclosed in :: for lines of the code block. Labels can include alphanumeric characters, underscore (_), and hyphen (-). The directive is used similarly to the Sphinx directive code-block. This extension must be activated separately in the project conf.py (extensions = ["aplus_setup", "codeblock_lineref"]).

This directive has limitations (that have not been fixed thus far):

• The lref link can only refer to code blocks in the same RST file.
• The code block containing the label must be defined before the lref link that refers to the label. Otherwise, the link does not work. In other words, you can not link to the code block in the chapter text before the code block.

.. lineref-code-block:: python
  :linenos:

  def example():
      :my-label-name:var = "something"
      return var

The role lref makes it possible to link to labels defined in lineref-code-block blocks:
:lref:`optional link text <my-label-name>`.

13. REPL sessions

The repl directive is used to print a (Scala) REPL session (read-eval-print loop). This extension must be activated separately in the project conf.py (extensions = ["aplus_setup", "repl"]).

.. repl-res-count-reset::

.. repl::

  > val numbers = List(1, 5, 6, 2)

  numbers: List[Int] = List(1, 5, 6, 2)
  > numbers.sum

  res0: Int = 14

14. Submittable ACOS exercises

The custom directive acos-submit behaves almost identically to the normal submit directive. It is intended for exercises that are hosted outside the MOOC grader, such as the ACOS server. The directive option url should define the URL path of the exercise in the ACOS server. The URL domain is added automatically based on the configuration value acos_submit_base_url in conf.py. The acos-submit directive also automatically uses the ajax flag of the submit directive.

The usage:

In conf.py:
  acos_submit_base_url = 'https://acos.cs.aalto.fi'
  acos_submit_base_url = 'http://172.21.0.4:3000'

In RST:
.. acos-submit:: somekey 100
  :title: My title
  :url: /aplus/draganddrop/draganddrop-example/revealdemo

15. HTML div elements

The div directive can be used to insert basic <div> html elements into the generated document. This is useful for styling and other similar reasons.

Any arguments given to the directive will be added as classes to the resulting element.

This extension is originally from https://github.com/dnnsoftware/Docs/blob/master/common/ext/div.py and is licensed under the MIT license (see source file comments for the license text).

Usage example:

.. div:: css-class-1 css-class-2

  Element contents (_parsed_ as **RST**). Note the blank line and the
  indentation.

16. CSS styled topics

Directive that inserts topic elements that are more friendly to css styling using the bootstrap framework. Usage:

.. styled-topic::
  :class: css-class-1 css-class-2

  Topic must include content. All content is **parsed** _normally_ as RST.

  Note the blank line between the directive and its content, and the
  indentation.

An optional :class: option can be used to insert other css classes to the resulting <div> element.

This extension also registers a conf.py value of 'bootstrap_styled_topic_classes'. It can be used to set default classes that are added to all styled-topic directives. The default value is dl-horizontal topic where dl-horizontal is useful for inserting bootstrap styled <dl> elements into the div.

17. Media directives

The media directives were developed basically for a single course and they may not be quite reusable for other usecases, but they are listed here anyway. This extension must be activated separately in the project conf.py (extensions = ["aplus_setup", "media"]).

A story embedded in an iframe.

.. story:: story_name
  :story-height: 690
  :story-width: 865

JSVee program visualization (hosted in the MOOC grader). This requires a JavaScript library obtained elsewhere.

.. jsvee:: id

YouTube video

.. youtube:: id
  :video-height: 400
  :video-width: 640

Local video hosted in the _static/videot directory of the course in the mp4 or webm format. The id argument is the filename without the extension.

.. local-video:: id
  :video-width: 650

Embedded page (iframe)

.. embedded-page:: url
  :frame-height: 500
  :frame-width: 850

18. Columns and rows

Directive for creating columns and rows. Primarily designed to be used with "point of interest" summary blocks. But should also work independently to layout content.

This extension must be activated separately in the project conf.py (extensions = ["aplus_setup", "row"]).

Note

Column (:columns:) options in the point of interest directive do not work with these columns. Use it with the columns created with ::newcol.

Example with point-of-interest directive.

Available options:
:width: sets column width. Maximum value of 12 when using one column. If not set it will use full width (12).
:column-class: Bootstrap classes can be applied. See example below.


.. point-of-interest:: Test

   .. row::

     .. column::
       :width: 8
       :column-class: bg-warning text-center

       .col-8 this is column's content.

       .. row::

         .. column::
           :width: 6
           :column-class: bg-light

           .col-6

         .. column::
           :width: 6
           :column-class: bg-secondary

           .col-6

     .. column::
       :width: 4
       :column-class: bg-success

       .col-4

Width is not mandatory, but if it is not given then it uses the width of 12 automatically.

Note - newcol is deprecated

Older columns (::newcol) work, but they are deprecated. Column and row directives should be used instead.

19. Tabs

The rst-tabs directive is designed to add tabbed content. Tabs separate content into different panels so that one panel is displayed at a time. This extension must be activated separately in the project by adding the following settings to the conf.py file located in the root of your course directory.

extensions = ["aplus_setup", "tabs"]
...
include_tab_js = True
include_tab_css = True

This directive requires a custom JavaScript and CSS implementation for interacting with the tabs and the tab content. Therefore, we have added a default implementation that allow you to make use of the rst-tabs directive without having to write your own JS or CSS. However, if you want to remove the default JavaScript and CSS implementation, you can change the value of include_tab_js and include_tab_css to False. By doing so, you could write your own CSS and JS code to interact with the rst-tabs directive.

The following snippet of code is an example on how you can use the tabs extension. As you can see in the example below.

.. rst-tabs::

  .. tab-content:: tab-html-render
    :title: HTML visualisation

    .. raw:: html

      <h1>Title</h1>

    :menuselection:`Action 1 --> Action 2`

    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vivamus hendrerit
    auctor quam at maximus. Phasellus ornare suscipit tortor et aliquet. Aliquam
    erat volutpat. Aliquam at orci vel nibh tincidunt lacinia. Cras gravida,
    mauris eget vulputate ullamcorper, turpis est commodo velit, consequat
    pulvinar augue mi malesuada metus. Maecenas ac diam et augue placerat
    faucibus. Nullam ut iaculis nisi.

  .. tab-content:: tab-code
    :title: RST Code

    .. code-block:: rst

      Title
      =====

      :menuselection:`Action 1 --> Action 2`

      Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vivamus hendrerit
      auctor quam at maximus. Phasellus ornare suscipit tortor et aliquet. Aliquam
      erat volutpat. Aliquam at orci vel nibh tincidunt lacinia. Cras gravida,
      mauris eget vulputate ullamcorper, turpis est commodo velit, consequat
      pulvinar augue mi malesuada metus. Maecenas ac diam et augue placerat
      faucibus. Nullam ut iaculis nisi.

The rst-tabs directive should contain one or more tab-content directives. Each tab-content requires one argument, which is used internally to identify individual tab-content. Therefore, this argument must be unique and cannot contain any whitespace. You must also add the option title to the tab-content directive since it is the title that will be shown in your tabs. The content of each tab-content can be any anything.

20. Interactive code

The thebe-button or thebe-precell-button directives and thebe class can be used to make Python, R, C/C++ and Octave code-blocks interactive, allowing students to edit and run code. This extension must be activated separately in the project by adding "thebe" to the extensions list variable in the conf.py file located in the root of your course directory.

extensions = ["aplus_setup", "thebe"]

Additionally, conf.py should contain the following configuration to use interactive code blocks.

   # Thebe configuration
    thebe_config = {
      "binderUrl": "https://mybinder.org" # For testing only
      # "repository_url": "https://github.com/binder-examples/jupyter-stacks-datascience",
      # "repository_branch": "master",
      "selector": "div.highlight",
      "codemirror-config": {
          "theme": "eclipse",
          "electricChars": "true"
          "lineNumbers": "true",
          "indentWithTabs": "true",
          "indentUnit": 4,
      }
    }

The first three settings configure the kernel

• "binderUrl". A url to a BinderHub server. mybinder.org should only be used for testing, and should be replaced by a BinderHub server provided by your instution when running a course. (For Aalto Users: you can use the BinderHub server at https://csej4404-binderhub.aalto.fi)
• "repository_url". A valid binderhub repository to base the code environment on. Should be a public GitHub repository. Defaults to jupyter-stacks-datascience. (For Aalto users: if you want this repository to be private, please contact [email protected] and ask for a version.aalto.fi gitlab repository in the group binderhub-code).
• "repository_branch". The branch to use from the repository above. Defaults to master.

The kernel configuration options are followed by

• "selector" configuration. The last configuration ultimately defines which rst code blocks should be converted to interactive code elements. If this configuration is
• "selector": "div.highlight" all the code blocks in rst files starting or containing :thebe-kernel: <KERNEL-NAME-HERE> directive will be converted to interactive code blocks.
• "selector": ".thebe" the code blocks containing :class: thebe option will be converted to interactive code blocks. This is the default option, and if it is desired to have all code blocks to be interactive code blocks, "selector": "div.highlight" should be explicitly configured.

You can also configure the editable code area behavior in thebe_config as follows.

1. "theme": "eclipse" configuration option states the editor code style theme. We support only two options for now
   • "theme": "eclipse" (default). This theme is very similar to the default theme of Eclipse IDE, and has a light background, which makes it a natural choice for the default A+ style in general.
   • "theme": "abcdef". This is a colorful theme with a dark background.
2. "electricChars": "true" configuration option sets whether the editor (interactive code block) should re-indent the current line when a character is typed. Change this configuration to "false" if you prefer the students to practice proper indentation. Default is "true".
3. "lineNumbers": "true" configuration enables line numbering. When enabled, the editor will have a left gutter area with line numbers. The default is "true", and should be explicitly set to "false" if you do not want to have line numbers.
4. "indentWithTabs": "true" configuration enables indentation with tabs. The default configuration is "true", and should be set to "false" if you prefer to use spaces for indentation. A tab has 4 characters width.
5. "indentUnit": 4 configuration sets how many spaces define an indented block. The default is 4 spaces, and should be explicitly configured to change the indentation experience.

• In addition to these, the matching braces are highlighted when one of (}, ) or ]) is typed.

The following code snippets are examples on how you can use the thebe extension. The thebe-button directive makes an activation button that looks good on its own, and the thebe-precell-button makes an activation button that looks nice when placed just before a code cell.

:thebe-kernel: python

.. thebe-button:: Custom button text (defaults to "Run code")

.. code-block:: python
  :class: thebe

  a = 1
  b = 2
  c = a + b
  print(c)

:thebe-kernel: python

.. thebe-precell-button:: Custom button text (defaults to "Activate")
.. code-block:: python
  :class: thebe

  a = 1
  b = 2
  c = a + b
  print(c)

List of exercise statuses

There are 6 possible statuses for exercises:

• ready: Visible exercise listed in table of contents.
• unlisted (default): Unlisted in table of contents, otherwise same as ready.
• hidden: Hidden from non course staff.
• enrollment: Questions for students when they enroll to a course.
• enrollment_ext: Same as enrollment but for external students.
• maintenance: Hides the exercise description and prevents submissions.

Defining reveal rules

Rules for revealing submission feedback (reveal-submission-feedback) and model solutions (reveal-model-solutions) can be defined and overridden on multiple levels:

• course level, in conf.py
• module level, in the aplusmeta directive
• exercise level, in the questionnaire/submit directive

Additionally one can define separately from the reveal mode if the user should see submissions with zero points immediately (default false).

:show-zero-points-immediately: true
:show-zero-points-immediately: false

The reveal rules are defined by providing the name of a reveal mode. Some of the modes also accept arguments after the mode name. The reveal modes are:

• manual: Never revealed, unless a teacher manually reveals it in A+ exercise settings.
• immediate: Always revealed. This is the default setting for revealing submission feedback.
• time: Revealed at a specific time. The reveal date and time must be provided as an argument, in the format YYYY-MM-DD [hh[:mm[:ss]]] or DD.MM.YYYY [hh[:mm[:ss]]]. Examples:

:reveal-submission-feedback: time 2020-01-16
:reveal-submission-feedback: time 2020-01-16 16
:reveal-submission-feedback: time 16.01.2020 16:00
:reveal-submission-feedback: time 16.01.2020 16:00:00

• deadline: Revealed after the exercise deadline, and the possible deadline extension granted to the student. This is the default setting for revealing model solutions. An additional delay can optionally be provided as an argument, in the format +<number><unit>, where unit is 'd' (days), 'h' (hours) or 'm'/'min' (minutes). Examples:

:reveal-submission-feedback: deadline
:reveal-submission-feedback: deadline +1d
:reveal-submission-feedback: deadline +2h
:reveal-submission-feedback: deadline +30m
:reveal-submission-feedback: deadline +30min

• deadline_all: Revealed after the exercise deadline, and all deadline extensions granted to any student on the course. An additional delay can optionally be provided as an argument. See instructions above.
• deadline_or_full_points: Same as deadline, but also revealed after the student has achieved full points from the exercise. An additional delay can optionally be provided as an argument. See instructions above.
• completion: Revealed after the student has used all submissions or achieved full points from the exercise.

Developers: how to debug A-plus-rst-tools and Sphinx in VS Code

Follow these instructions to debug A+ RST course builds in A-plus-rst-tools and/or Sphinx. We use the VS Code Python debugger and run the course build in a Docker container.

Modified docker-compile.sh in the A+ course directory (compare to the original):

docker run -t --rm \
  -v "$(pwd):/compile" \
  -u "$(id -u):$(id -g)" \
  -e "STATIC_CONTENT_HOST=http://localhost:8080/static/default" \
  -e "COURSE_KEY=default" \
  -p "5675:5678" \
  apluslms/compile-rst:4.3 \
  sh -c 'make touchrst && pip3 install debugpy -t /tmp && python3 /tmp/debugpy --wait-for-client --listen 0.0.0.0:5678 /compile/debug_sphinx_build.py -b html -d _build/doctrees . _build/html'

Copy this script to a new file debug_sphinx_build.py under the root of the course repository. This is a copy of the sphinx-build script from the Sphinx installation. It is easier to start this in the docker run command in docker-compile.sh when the file exists in the course directory.

# -*- coding: utf-8 -*-
import re
import sys
from sphinx.cmd.build import main
if __name__ == '__main__':
    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
    sys.exit(main())

In VS Code, set up the usual debugging environment in the a-plus-rst-tools project: Python remote attach, localhost, port 5675

Run docker-compile.sh in the terminal and start debugging in VS Code.