- PCB design using KiCAD or Cadence SPB.
- MCU program and port system using C language.
- Programs for data visualization via Qt.
- FPGA program using Verilog HDL.
You might want to check my personal website at https://zhuyanzhen1.github.io/ZhuYanzhen1/
You might want to check my personal website at https://zhuyanzhen1.github.io/ZhuYanzhen1/
CAN peripheral interface for Intel NUC and other x86 device. 用于英特尔 NUC及其它x86架构的平台CAN的外设接口
本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competi…
本仓库储存了全志V3s芯片的开发板相关资料。仓库中包含了开发板原理图、PCB和制造文件以及相对应的u-boot、Linux Kernel、Buildroot的构建脚本。This repository stores development board related information for Allwinner V3s chips.