Merging from CMake branch in preparation for 4.3.0 release.

CMakeLists.txt

@@ -83,7 +83,6 @@ ENABLE_MAKEDIST(cmake_config.h.in CMakeLists.txt cmake)
 ## End 'enable dist and distcheck'
 # Only necessary for Windows
 IF(MSVC)
-	INCLUDE (${CMAKE_SOURCE_DIR}/cmake/modules/windows/FindHDF5.cmake)
 	# Supress some warnings on Windows
 	ADD_DEFINITIONS(-D_CRT_SECURE_NO_WARNINGS)
 ENDIF()
@@ -383,40 +382,18 @@ IF (USE_HDF5 OR ENABLE_NETCDF_4)
   SET(USE_HDF5 ON)
   SET(USE_NETCDF4 ON)
 
-  #FIND_PACKAGE(HDF5 COMPONENTS C HL REQUIRED)
-  FIND_LIBRARY(HDF5_LIB NAMES hdf5 libhdf5 hdf5dll)
-  FIND_LIBRARY(HDF5_HL_LIB NAMES hdf5_hl libhdf5_hl hdf5_hldll)
-
-  IF(NOT HDF5_LIB) 
-	MESSAGE(FATAL_ERROR "netCDF-4 support specified, but hdf5 libraries not found.")
-  ELSEIF(NOT HDF5_HL_LIB)
-	MESSAGE(FATAL_ERROR "netCDF-4 support specified, but hdf5 high-level libraries not found.")
-  ENDIF()
-
-  SET(HDF5_LIBRARIES ${HDF5_LIB} ${HDF5_HL_LIB})  
-  FIND_PATH(HDF5_INCLUDE_DIR H5public.h)
-
-  IF(NOT HDF5_INCLUDE_DIR) 
-	MESSAGE(FATAL_ERROR "netCDF-4 support specified, but hdf5 include directories not found.")
-  ENDIF()
-
-  MESSAGE(STATUS "Found HDF5: ${HDF5_LIB}")
-  MESSAGE(STATUS "Found HDF5_HL: ${HDF5_HL_LIB}")
-  MESSAGE(STATUS "Found HDF5 Includes: ${HDF5_INCLUDE_DIR}")
-
+IF(MSVC)
+  FIND_PACKAGE(HDF5 COMPONENTS C HL NO_MODULE REQUIRED)
+ELSE()
+  FIND_PACKAGE(HDF5 COMPONENTS C HL REQUIRED)
+ENDIF()
 
-  INCLUDE_DIRECTORIES(${HDF5_INCLUDE_DIR})
+  INCLUDE_DIRECTORIES(${HDF5_INCLUDE_DIRS})
 
   #Check to see if H5Z_SZIP exists in HDF5_Libraries. If so, we must use szip.
   IF(USE_SZIP)
-	 #FIND_PACKAGE(SZIP)
-	FIND_LIBRARY(SZIP_LIBRARY NAMES szip sz libszip)
-  	IF(NOT SZIP_LIBRARY)
-		MESSAGE(FATAL_ERROR "HDF5 compiled with szip, but cannot find local szip libraries.")
-  	ELSE()
-		MESSAGE(STATUS "Found SZip: ${SZIP_LIBRARY}")
-  	ENDIF()
-	INCLUDE_DIRECTORIES(${SZIP_INCLUDE_DIRS})
+	FIND_PACKAGE(SZIP NO_MODULE)
+	INCLUDE_DIRECTORIES(${SZIP_INCLUDE_DIR})
   ENDIF()
 
   SET(H5_USE_16_API 1)   

COMPILE_CMake.txt → COMPILE.cmake.txt

@@ -1,9 +1,11 @@
+**************************
 Building NetCDF with CMake
 **************************
 
 This document describes how to use CMake to configure and build the
 NetCDF-C libraries across different platforms.
 
+************
 Introduction
 ************
 
@@ -17,7 +19,7 @@ and will generate files for a variety of build systems.
 - Windows: Borland Makefiles, MSYS Makefiles, MinGW Makefiles, Visual
 - Studio Projects (Versions 6+) Linux: Ninja, KDevelop3 OSX: Xcode
 
-
+************************************
 Requirements for building with CMake
 ************************************
 
@@ -26,8 +28,7 @@ a) Subversion: svn co
    http://svn.unidata.ucar.edu/repos/netcdf/trunk netcdf 
 2. CMake 2.8.8+ for your platform of choice. http://www.cmake.org
 
-
-
+***********
 Using CMake
 ***********
 
@@ -65,15 +66,15 @@ C:\netcdf\build_dir>cmake --build .
 Note: If you want to use a different generator than the default, you
 would specify it with the '-G' flag.
 
-Common NetCDF Options
+Common NetCDF/CMake Options
 *********************
 
 - ENABLE_NETCDF_4 (On by Default)
 - ENABLE_DAP (On by Default)
 - BUILD_SHARED_LIBS (Off by Default for Windows, 
                      On by Default for Unix/Linux) 
 - ENABLE_DLL (Windows Only, Off by Default)
-
+- CMAKE_PREFIX_PATH (Specify list of 
 
 This is just a partial list of options available. To see a full list
 of options, run 'cmake -L' from the command line, or use a CMake GUI.

Makefile.am

@@ -10,7 +10,7 @@ ACLOCAL_AMFLAGS = -I m4
 
 # These files get added to the distribution.
 EXTRA_DIST = README COPYRIGHT RELEASE_NOTES INSTALL INSTALL.cmake test_prog.c \
-	lib_flags.am cmake CMakeLists.txt COMPILE_CMake.txt config.h.in.cmake \
+	lib_flags.am cmake CMakeLists.txt COMPILE.cmake.txt config.h.in.cmake \
 	config.h.in.cmake cmake_uninstall.cmake.in netcdf-config-version.cmake.in \
 	netcdf-config.cmake.in FixBundle.cmake.in 
 

RELEASE_NOTES

@@ -6,7 +6,11 @@ https://www.unidata.ucar.edu/jira/browse/NCF-XXX .
 
 VERSION		COMMENTS
 -------		--------
-4.3		Released 201?-??-??
+4.3		Released 2013-04-29
+
+		Fixed netCDF-4 bug where odometer code for
+		libdap2 mishandled stride > 1. Bug reported
+		by Ansley Manke. [NCF-249]
 
 		Fixed netCDF-4 bug where netCDF would ignore
 		the HDF5 reference type in the file, instead

config.h.in.cmake

@@ -36,7 +36,6 @@
 #endif
 
 
-
 /* Cache Size, other variables for HDF5 */
 #define DEFAULT_CHUNK_SIZE	${DEFAULT_CHUNK_SIZE}
 #define DEFAULT_CHUNKS_IN_CACHE	${DEFAULT_CHUNKS_IN_CACHE}
@@ -53,7 +52,8 @@
 #endif
 
 #define PACKAGE_VERSION "${VERSION}"
-#define VERSION "${VERSION}"
+#cmakedefine VERSION "${VERSION}"
+#cmakedefine NC_VERSION "${VERSION}"
 /* For HDF5 use. */
 #cmakedefine H5_USE_16_API 1
 

include/ncconfigure.h

@@ -22,12 +22,14 @@ defined.
 extern char* strdup(const char*);
 #endif
 
-#if HAVE_BASETSD_H
-#ifndef SSIZE_T
-#include <BaseTsd.h>
-#define ssize_t SSIZE_T
-#endif
-#endif
+//#if HAVE_BASETSD_H
+//#ifndef ssize_t
+//#ifndef SSIZE_T
+//#include <BaseTsd.h>
+//#endif
+//#define ssize_t SSIZE_T
+//#endif
+//#endif
 
 
 

oc2/oc.h

@@ -17,6 +17,13 @@ Version: 2.0
 /*!\file oc.h
 */
 
+#ifndef ssize_t
+#ifdef SSIZE_T
+#define ssize_t SSIZE_T
+#else
+#define ssize_t int
+#endif
+#endif
 /*!\defgroup Definitions Constants, types, etc.
 @{*/
 

oc2/ocinternal.c

@@ -584,7 +584,7 @@ ocsetcurlproperties(OCstate* state)
     if(state->curlflags.useragent == NULL) {
         size_t len = strlen(DFALTUSERAGENT) + strlen(VERSION) + 1;
 	char* agent = (char*)malloc(len+1);
-	if(occopycat(agent,len,2,DFALTUSERAGENT,VERSION))
+    if(occopycat(agent,len,2,DFALTUSERAGENT,VERSION))
 	    state->curlflags.useragent = agent;
     }
     return;

oc2/xxdr.c

@@ -220,7 +220,7 @@ xxdr_free(XXDR* xdr)
 int
 xxdr_skip(XXDR* xdrs, off_t len)
 {
-  ssize_t pos;
+    unsigned int pos;
     pos = xxdr_getpos(xdrs);
     pos = (pos + len);
     if(pos < 0) pos = 0;