Increase retract distance moisture sensitive materials to 5mm for Factor 4

generic_cpe.xml.fdm_material

@@ -10,7 +10,7 @@ Generic CPE profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>12f41353-1a33-415e-8b4f-a775a6c70cc6</GUID>
-        <version>40</version>
+        <version>41</version>
         <color_code>#159499</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -156,6 +156,7 @@ Generic CPE profile. The data in this file may not be correct for your specific
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

generic_cpe_plus.xml.fdm_material

@@ -10,7 +10,7 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>e2409626-b5a0-4025-b73e-b58070219259</GUID>
-        <version>40</version>
+        <version>41</version>
         <color_code>#3633F2</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -144,6 +144,7 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>

generic_nylon.xml.fdm_material

@@ -10,7 +10,7 @@ Generic Nylon profile. The data in this file may not be correct for your specifi
             <color>Generic</color>
         </name>
         <GUID>28fb4162-db74-49e1-9008-d05f1e8bef5c</GUID>
-        <version>34</version>
+        <version>35</version>
         <color_code>#3DF266</color_code>
         <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -162,7 +162,7 @@ Generic Nylon profile. The data in this file may not be correct for your specifi
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">75</setting>
-            <setting key="retraction amount">1.5</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="anti ooze retract position">-6</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>

generic_petg.xml.fdm_material

@@ -10,7 +10,7 @@ Generic PETG profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>1cbfaeb3-1906-4b26-b2e7-6f777a8c197a</GUID>
-        <version>26</version>
+        <version>27</version>
         <color_code>#ff5086</color_code>
         <description>Generic PETG profile. The data in this file may not be correct for your specific machine.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -143,6 +143,7 @@ Generic PETG profile. The data in this file may not be correct for your specific
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

generic_pp.xml.fdm_material

@@ -10,7 +10,7 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n
             <color>Generic</color>
         </name>
         <GUID>aa22e9c7-421f-4745-afc2-81851694394a</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#85f9de</color_code>
         <description>Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models.</description>
         <adhesion_info>Adhesion sheets are required.</adhesion_info>
@@ -168,6 +168,7 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n
             <setting key="anti ooze retract position">-14</setting>
             <setting key="break preparation position">-14</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.7</cura:setting>
 
             <hotend id="AA 0.25">

generic_tpu.xml.fdm_material

@@ -10,7 +10,7 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
             <color>Generic</color>
         </name>
         <GUID>1d52b2be-a3a2-41de-a8b1-3bcdb5618695</GUID>
-        <version>37</version>
+        <version>38</version>
         <color_code>#B22744</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -147,7 +147,7 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>

ultimaker_cpe.xml.fdm_material

@@ -8,7 +8,7 @@
             <label>Any color CPE</label>
         </name>
         <GUID>3cf87e76-dae0-42cb-ae86-3d39918af2ad</GUID>
-        <version>9</version>
+        <version>10</version>
         <color_code>#159499</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -157,6 +157,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_black.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>a8955dc3-9d7e-404d-8c03-0fd6fee7f22d</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#2a292a</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_blue.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Blue</color>
         </name>
         <GUID>4d816290-ce2e-40e0-8dc8-3f702243131e</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#00a3e0</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_dark-grey.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Dark Gray</color>
         </name>
         <GUID>10961c00-3caf-48e9-a598-fa805ada1e8d</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#4f5250</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_green.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Green</color>
         </name>
         <GUID>7ff6d2c8-d626-48cd-8012-7725fa537cc9</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#78be20</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_light-grey.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Light Gray</color>
         </name>
         <GUID>173a7bae-5e14-470e-817e-08609c61e12b</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#c5c7c4</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_plus.xml.fdm_material

@@ -8,7 +8,7 @@
             <label>Any color CPE+</label>
         </name>
         <GUID>4034cfaa-a512-4645-a07d-89a2dd4db91d</GUID>
-        <version>8</version>
+        <version>9</version>
         <color_code>#3633F2</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -145,6 +145,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_plus_black.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>1aca047a-42df-497c-abfb-0e9cb85ead52</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#0e0e10</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -143,6 +143,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_plus_transparent.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Transparent</color>
         </name>
         <GUID>a9c340fe-255f-4914-87f5-ec4fcb0c11ef</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#d0d0d0</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -143,6 +143,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_plus_white.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>White</color>
         </name>
         <GUID>6df69b13-2d96-4a69-a297-aedba667e710</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#f1ece1</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -143,6 +143,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_red.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Red</color>
         </name>
         <GUID>00181d6c-7024-479a-8eb7-8a2e38a2619a</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#c8102e</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_transparent.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Transparent</color>
         </name>
         <GUID>bd0d9eb3-a920-4632-84e8-dcd6086746c5</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#d0d0d0</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_white.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>White</color>
         </name>
         <GUID>881c888e-24fb-4a64-a4ac-d5c95b096cd7</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#f1ece1</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>

ultimaker_cpe_yellow.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Yellow</color>
         </name>
         <GUID>b9176a2a-7a0f-4821-9f29-76d882a88682</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#f6b600</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>