Increase flow sensor margin from 20% to 505 to prevent false positive…

… ER314 trips. PP-494
Ultimaker · Jun 25, 2024 · a205e42 · a205e42
1 parent 9296c61
commit a205e42
Show file tree

Hide file tree

Showing 2 changed files with 4 additions and 4 deletions.
diff --git a/generic_pva.xml.fdm_material b/generic_pva.xml.fdm_material
@@ -10,7 +10,7 @@ Generic PVA profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>86a89ceb-4159-47f6-ab97-e9953803d70f</GUID>
-        <version>36</version>
+        <version>37</version>
         <color_code>#a32bcc</color_code>
         <description>Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon.</description>
         <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
@@ -152,7 +152,7 @@ Generic PVA profile. The data in this file may not be correct for your specific
             <setting key="heated bed temperature">40</setting>
             <setting key="no load move factor">1</setting>
             <setting key="retraction amount">5</setting>
-            <setting key="flow sensor detection margin">0.2</setting>
+            <setting key="flow sensor detection margin">0.5</setting>
 
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>

diff --git a/ultimaker_pva.xml.fdm_material b/ultimaker_pva.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Natural</color>
         </name>
         <GUID>fe15ed8a-33c3-4f57-a2a7-b4b78a38c3cb</GUID>
-        <version>41</version>
+        <version>42</version>
         <color_code>#f5f2d1</color_code>
         <description>Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon.</description>
         <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
@@ -178,7 +178,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="no load move factor">1</setting>
             <setting key="retraction amount">5</setting>
-            <setting key="flow sensor detection margin">0.2</setting>
+            <setting key="flow sensor detection margin">0.5</setting>
 
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>