PP-514 reduce retraction length for PVA on F4

Ultimaker · Aug 28, 2024 · 87365a0 · 87365a0
1 parent b0547e8
commit 87365a0
Show file tree

Hide file tree

Showing 2 changed files with 4 additions and 4 deletions.
diff --git a/generic_pva.xml.fdm_material b/generic_pva.xml.fdm_material
@@ -10,7 +10,7 @@ Generic PVA profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>86a89ceb-4159-47f6-ab97-e9953803d70f</GUID>
-        <version>38</version>
+        <version>39</version>
         <color_code>#a32bcc</color_code>
         <description>Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon.</description>
         <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
@@ -149,7 +149,7 @@ Generic PVA profile. The data in this file may not be correct for your specific
             <setting key="build volume temperature">35</setting>
             <setting key="print cooling">50</setting>
             <setting key="no load move factor">1</setting>
-            <setting key="retraction amount">5</setting>
+            <setting key="retraction amount">2.5</setting>
 
             <hotend id="BB 0.4">
                 <setting key="hardware compatible">yes</setting>

diff --git a/ultimaker_pva.xml.fdm_material b/ultimaker_pva.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Natural</color>
         </name>
         <GUID>fe15ed8a-33c3-4f57-a2a7-b4b78a38c3cb</GUID>
-        <version>43</version>
+        <version>44</version>
         <color_code>#f5f2d1</color_code>
         <description>Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon.</description>
         <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
@@ -175,7 +175,7 @@
             <setting key="build volume temperature">35</setting>
             <setting key="print cooling">50</setting>
             <setting key="no load move factor">1</setting>
-            <setting key="retraction amount">5</setting>
+            <setting key="retraction amount">2.5</setting>
 
             <hotend id="BB 0.4">
                 <setting key="hardware compatible">yes</setting>