Release of version 2.1.2

This release is an update to KiCad 8. There are no functional changes.

• Updated the schematic symbols
• Updated the footprints.
• Added teardrops

What's Changed

• [gha] Bump actions/upload-artifact from 3 to 4 by @dependabot in #15
• Bump footprints.pretty from 61de155 to 89722ff by @dependabot in #16
• Bump libraries from 2f1f39a to b3c5738 by @dependabot in #18
• Bump footprints.pretty from c7eeead to 21b6035 by @dependabot in #19
• Bump libraries from b3c5738 to fc80998 by @dependabot in #20
• Bump footprints.pretty from 21b6035 to c7e531f by @dependabot in #22
• Bump libraries from fc80998 to 9087a43 by @dependabot in #21
• Bump libraries from 9087a43 to 57262d7 by @dependabot in #23
• Update CI to KiCad 8 by @PatrickBaus in #24
• Bump libraries from 57262d7 to b8f384f by @dependabot in #25
• Update datasheet by @PatrickBaus in #26
• Bump footprints.pretty from 14a956a to 0b98113 by @dependabot in #28
• Bump libraries from a52b359 to 5a2201a by @dependabot in #27
• Bump libraries from 5a2201a to ff94194 by @dependabot in #29
• Bump footprints.pretty from 0b98113 to df71829 by @dependabot in #30

Full Changelog: 2.1.1...2.1.2

Release of version 2.1.1

What's Changed

• Fixed footprint of the SQJQ160E NMOS fets 14fdafa
• Added Quick-connect connector 5e12061 to connect the chassis
• APQ/DIN_41612_Backplane/commit/098b611a89a7fea8d43620bbd72bf67211ae9a96)
• Add protection cover for the back side by @PatrickBaus in #10
• Bump footprints.3dshapes from b44d94e to 8369024 by @dependabot in #8
• Bump libraries from fdcfc3f to 50896b9 by @dependabot in #11
• Bump footprints.pretty from 681ebb2 to 3b08aea by @dependabot in #12
• Bump footprints.3dshapes from 8369024 to 241d3f5 by @dependabot in #13

Full Changelog: 2.1.0...2.1.1

Release of version 2.1.0

Important Notice

The power connector now has reversed polarity. This is not a breaking change as the board is protected against reverse polarity.

What's Changed

• Fixed LM5067 footprint
• Replaced negative rail NMOS with SQJQ160E to reduce the on resistance
• Changed PCB power connector to right angled variant
• Replaced LM5067 current limiting resistor with a current limiting diode
• Added thermal jumpers
• Reduced datasheet absolute maximum voltage to ±48 V
• Added Ferrite beads at the board input

Full Changelog: 2.0.0...2.1.0

Release of version 2.0.0

Added supply rail protections
Added datasheet
Added CI pipeline
Added assembly instructions

v1.0.0

Initial relaease for testing