Model exploration

12. Analysis of the axial_map results
    1. Close the “Graph Analysis” SST tool
    2. Open the “Attributes Explorer” SST tool
    3. Select the “axial_map” layer to explore
    4. Select the “INTrN” attribute
    5. Select the charts tab
    6. Select Scatter plot
    7. Set “Connectivity” in the Y axis (Inteligibility plot)
    8. Right click the chart and export the plot as image file
13. Analysis of the axial_map_segment results
    1. Select the “axial_map_segment” to explore
    2. Select the “CHr400m” attribute
    3. Increase the line width to 0.75
    4. Set intervals to “Custom (Equal)”
    5. Change the Top value to 20
    6. Click the “Apply Symbology” button
    7. This is the standard depthmapX display for the Choice measure
    8. Save an image of the map window
14. Alternative method 1
    1. Select the “Charts” Tab
    2. Move the selection line to highlight the tail of the distribution
    3. Select the Stats tab
    4. Take note of the minimum value (e.g. 2500)
    5. Return to the Symbology Tab
    6. Set the Top value to the number you noted
    7. Click the “Apply Symbology” button
    8. Click the “Deselect features” button in the main toolbar
15. Alternative method 2
    1. Set intervals to “Natural breaks”
    2. Click the “Apply Symbology” button
    3. Save an image of the map window