Bluetooth library for Robopoly Shield

This document explains the usage of the Bluetooth library to be used with the Robopoly Shield and the HC-05 Bluetooth module. The Bluetooth module uses the TX1 and RX1 lines on pins 0 and 1, so they won't be usable for other things.

The library is written in Object-Oriented C++, it's made of a Bluetooth class named BT that inherits from the Arduino Stream class.

When the header file is included in the program (Bluetooth.h) the BT class instance is automatically created under Bluetooth.

Communication methods

int Bluetooth.available(void);

// ex: check if there's something in the input buffer
if(Bluetooth.available())
{
    // process data in buffer with Bluetooth.read()
}

Same as Serial.available(); for the Bluetooth module.

---

int Bluetooth.peek(void);

// ex: get the first value in the input buffer without removing it from the buffer
char value = Bluetooth.peek();

Same as Serial.peek(); for the Bluetooth module.

---

int Bluetooth.read(void);

// ex: get the first value in the input buffer and remove it from the buffer
char value = Bluetooth.read();

Same as Serial.read(); for the Bluetooth module.

---

void Bluetooth.flush(void);

// ex: wait for the transmission of outgoing serial data to complete
Bluetooth.flush();

Same as Serial.flush(); for the Bluetooth module.

---

void Bluetooth.write(const char *data);

// ex: send binary data to the Bluetooth module
Bluetooth.write("test");

Same as Serial.write(); for the Bluetooth module. If the Bluetooth connection is up this method sends data to the other module or computer.

General configuration

bool Bluetooth.begin(unsigned int baud = NULL);

// ex: to start the communication with the Bluetooth module
Bluetooth.begin(9600);

Starts the serial communication with the Bluetooth module, by default the baud rate is 9600. If no argument is given the method will try to find it itself and it will take more time.

---

bool Bluetooth.setName(const char *name);

// ex: change the broadcasted name to MyRobot
Bluetooth.setName("MyRobot");

Changes the name seen when searching for Bluetooth devices on a computer or Bluetooth enabled smartphone. The name is remembered upon power cycling, so this method doesn't have to be called every time the program runs.

---

bool Bluetooth.setPass(const char *name);

// ex: change the pairing password
Bluetooth.setPass("1234");

When pairing the Bluetooth module with a computer or a smartphone it requires a password, by default it's 1234. The password is remembered upon power cycling, so this method doesn't have to be called every time the program runs.

---

bool Bluetooth.setBaud(const char *baud);

// ex: change the Bluetooth module baud rate
Bluetooth.setBaud("19200");

In case faster data speeds are needed the baud rate (bits per second) can be changed with this method. It will take effect when the module is power cycled. Do not select a baud rate of 115200 or higher, it won't work for some reason and has to be reconfigured with something that can communicate that fast.

The standard available baud rates are 4800, 9600, 19200, 38400, 57600, by default it's 9600.

Connecting to other modules

bool Bluetooth.setMode(unsigned char mode);

// ex: change the pairing password
Bluetooth.setMode(MASTER);

The HC-05 Bluetooth module can be configured as master to connect to other slave Bluetooth modules. By default the module is configured to slave mode every time the program is run, so it has to be called explicitly.

The available mode constats are MASTER and SLAVE.

---

bool Bluetooth.search(void);

// ex: search for the nearby Bluetooth devices, will return a string of MAC addresses
Bluetooth.search();

This method automatically sets the Bluetooth module mode to master and listens to the other module broadcastings and then lists their MAC addresses and signal strength.

Miscellaneous methods

bool Bluetooth.command(const char *cmd, const char *expReturn = "");

// ex: send any command to the Bluetooth module
// if the command is successful (Bluetooth module responds with OK) the method will return true
Bluetooth.command("AT OK", "OK");

The HC-05 module is configured with AT commands (see the datasheet for all the available commands). To send an AT command this method will enable the AT mode by setting the AT pin to a logical 1 (pin 4 on the shield), send the command and terminate it with a \r\n as per the protocol.

The module will usually respond with OK for which the method will return true if it corresponds to the second argument expReturn (see the datasheet for command return values), otherwise it will always return false.

Licence

This software is published under LGPL.