Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

z_endstop_pins + VAOC #290

Open
wants to merge 3 commits into
base: development
Choose a base branch
from
Open

z_endstop_pins + VAOC #290

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
3 commits
Select commit Hold shift + click to select a range
021f739
z_endstop_pins
3dprintpt Aug 26, 2024
253fc66
corrections
3dprintpt Aug 26, 2024
907449d
VAOC pins
3dprintpt Sep 7, 2024
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
6 changes: 5 additions & 1 deletion boards/btt-kraken/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@ aliases:
# steppers (Motor 1-2: X, Y, Motor 4-8: Z3, E, Z0, Z1, Z2, Motor 3: unused)
x_step_pin=PC14, x_dir_pin=PC13, x_enable_pin=PE6, x_uart_pin=PD6, x_diag_pin=PC15, x_endstop_pin=PC15,
y_step_pin=PE5, y_dir_pin=PE4, y_enable_pin=PE3, y_uart_pin=PD6, y_diag_pin=PF0, y_endstop_pin=PF0,
z0_step_pin=PG11, z0_dir_pin=PD7, z0_enable_pin=PG12, z0_uart_pin=PA15, z0_diag_pin=PF4, z_endstop_pin=PF4,
z0_step_pin=PG11, z0_dir_pin=PD7, z0_enable_pin=PG12, z0_uart_pin=PA15, z0_diag_pin=PF4, z_endstop_pin=PC0,
z1_step_pin=PB4, z1_dir_pin=PB3, z1_enable_pin=PB5, z1_uart_pin=PA9, z1_diag_pin=PF10,
z2_step_pin=PG15, z2_dir_pin=PB6, z2_enable_pin=PG14, z2_uart_pin=PA10, z2_diag_pin=PC0,
z3_step_pin=PG9, z3_dir_pin=PG10, z3_enable_pin=PG13, z3_uart_pin=PD2, z3_diag_pin=PF1, # Voron 2.4 support motor 4
Expand All @@ -23,6 +23,10 @@ aliases:
# auto leveling
bltouch_sensor_pin=PG1, bltouch_control_pin=PE9,
probe_pin=PG1,
# VAOC pins
vaoc_probe_pin=PF1
vaoc_neopixel_pin=PF12
vaoc_fan_pin=PA3 # fan 3
# 2p fans
fan_part_cooling_pin=PA0,
fan_toolhead_cooling_pin=PA1,
Expand Down
6 changes: 3 additions & 3 deletions boards/btt-manta-e3ez/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,9 +10,9 @@
aliases:
# steppers
x_step_pin=PA14, x_dir_pin=PA10, x_enable_pin=PA13, x_uart_pin=PB8, x_diag_pin=PC4, x_endstop_pin=PC5,
y_step_pin=PC8, y_dir_pin=PA15, y_enable_pin=PC14, y_uart_pin=PC9, y_diag_pin=PB0, y_endstop_pin=PB1,
z0_step_pin=PD2, z0_dir_pin=PD4, z0_enable_pin=PD3, z0_uart_pin=PD0, z0_diag_pin=null,
e_step_pin=PB7, e_dir_pin=PB6, e_enable_pin=PB4, e_uart_pin=PB5, e_diag_pin=null, e_heater_pin=PB11, e_sensor_pin=PA4,
y_step_pin=PC8, y_dir_pin=PA15, y_enable_pin=PC14, y_uart_pin=PC9, y_diag_pin=PB0, y_endstop_pin=PB1,
z0_step_pin=PD2, z0_dir_pin=PD4, z0_enable_pin=PD3, z0_uart_pin=PD0, z0_diag_pin=null, z_endstop_pin=PC6,
e_step_pin=PB7, e_dir_pin=PB6, e_enable_pin=PB4, e_uart_pin=PB5, e_diag_pin=null, e_heater_pin=PB11, e_sensor_pin=PA4,
stepper_spi_mosi_pin=PC12, stepper_spi_miso_pin=PC11, stepper_spi_sclk_pin=PC10,
# accel
adxl345_cs_pin=PC15,
Expand Down
2 changes: 0 additions & 2 deletions boards/btt-manta-m4p-22/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -11,8 +11,6 @@ aliases:
x_step_pin=PC6, x_dir_pin=PA14, x_enable_pin=PC7, x_uart_pin=PB12, x_diag_pin=PC0, x_endstop_pin=PC0,
y_step_pin=PB10, y_dir_pin=PB2, y_enable_pin=PB11, y_uart_pin=PC10, y_diag_pin=PC1, y_endstop_pin=PC1,
z0_step_pin=PB0, z0_dir_pin=PC5, z0_enable_pin=PB1, z0_uart_pin=PC9, z0_diag_pin=PC2, z_endstop_pin=PC2,
z1_step_pin=null, z1_dir_pin=null, z1_enable_pin=null, z1_uart_pin=null, z1_diag_pin=null,
z2_step_pin=null, z2_dir_pin=null, z2_enable_pin=null, z2_uart_pin=null, z2_diag_pin=null,
e_step_pin=PB3, e_dir_pin=PB4, e_enable_pin=PD5, e_uart_pin=PA13, e_diag_pin=null, e_heater_pin=PC8, e_sensor_pin=PA0,
stepper_spi_mosi_pin=PA7, stepper_spi_miso_pin=PA6, stepper_spi_sclk_pin=PA5,
# accel
Expand Down
2 changes: 1 addition & 1 deletion boards/btt-manta-m4p/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@ aliases:
# steppers
x_step_pin=PC6, x_dir_pin=PA14, x_enable_pin=PC7, x_uart_pin=PB12, x_diag_pin=PC0, x_endstop_pin=PC0,
y_step_pin=PB10, y_dir_pin=PB2, y_enable_pin=PB11, y_uart_pin=PC10, y_diag_pin=PC1, y_endstop_pin=PC1,
z0_step_pin=PB0, z0_dir_pin=PC5, z0_enable_pin=PB1, z0_uart_pin=PC9, z0_diag_pin=null,
z0_step_pin=PB0, z0_dir_pin=PC5, z0_enable_pin=PB1, z0_uart_pin=PC9, z0_diag_pin=null, z_endstop_pin=PC2,
e_step_pin=PB3, e_dir_pin=PB4, e_enable_pin=PD5, e_uart_pin=PA13, e_diag_pin=null, e_heater_pin=PC8, e_sensor_pin=PA0,
stepper_spi_mosi_pin=PA7, stepper_spi_miso_pin=PA6, stepper_spi_sclk_pin=PA5,
# accel
Expand Down
2 changes: 1 addition & 1 deletion boards/btt-manta-m5p/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@ aliases:
# steppers
x_step_pin=PC8, x_dir_pin=PC9, x_enable_pin=PA15, x_uart_pin=PD9, x_diag_pin=PD3, x_endstop_pin=PD3,
y_step_pin=PA10, y_dir_pin=PA14, y_enable_pin=PA13, y_uart_pin=PD8, y_diag_pin=PD2, y_endstop_pin=PD2,
z0_step_pin=PC6, z0_dir_pin=PC7, z0_enable_pin=PA9, z0_uart_pin=PB10, z0_diag_pin=null,
z0_step_pin=PC6, z0_dir_pin=PC7, z0_enable_pin=PA9, z0_uart_pin=PB10, z0_diag_pin=null, z_endstop_pin=PC3,
e_step_pin=PB0, e_dir_pin=PB1, e_enable_pin=PC4, e_uart_pin=PA6, e_diag_pin=null, e_heater_pin=PC5, e_sensor_pin=PA1,
stepper_spi_mosi_pin=PB15, stepper_spi_miso_pin=PB14, stepper_spi_sclk_pin=PB13,
# accel
Expand Down
10 changes: 7 additions & 3 deletions boards/btt-manta-m8p-11/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,9 +10,9 @@ aliases:
# steppers
x_step_pin=PE2, x_dir_pin=PB4, x_enable_pin=PC11, x_uart_pin=PC10, x_diag_pin=PF3, x_endstop_pin=PF3,
y_step_pin=PF12, y_dir_pin=PF11, y_enable_pin=PB3, y_uart_pin=PF13, y_diag_pin=PF4, y_endstop_pin=PF4,
z0_step_pin=PA10, z0_dir_pin=PA14, z0_enable_pin=PA15, z0_uart_pin=PF8, z0_diag_pin=null,
z1_step_pin=PD11, z1_dir_pin=PD9, z1_enable_pin=PD15, z1_uart_pin=PD14, z1_diag_pin=null,
z2_step_pin=PD8, z2_dir_pin=PC6, z2_enable_pin=PC7, z2_uart_pin=PD10, z2_diag_pin=null,
z0_step_pin=PA10, z0_dir_pin=PA14, z0_enable_pin=PA15, z0_uart_pin=PF8, z0_diag_pin=null, z_endstop_pin=PF5,
z1_step_pin=PD11, z1_dir_pin=PD9, z1_enable_pin=PD15, z1_uart_pin=PD14, z1_diag_pin=null,
z2_step_pin=PD8, z2_dir_pin=PC6, z2_enable_pin=PC7, z2_uart_pin=PD10, z2_diag_pin=null,
# Voron 2.4 support on motor 5
z3_step_pin=PC9, z3_dir_pin=PC8, z3_enable_pin=PD1, z3_uart_pin=PD0, z3_diag_pin=null,
e_step_pin=PD7, e_dir_pin=PD6, e_enable_pin=PF10, e_uart_pin=PF9, e_diag_pin=null, e_heater_pin=PE3, e_sensor_pin=PA1,
Expand All @@ -22,6 +22,10 @@ aliases:
# auto leveling
bltouch_sensor_pin=PB2, bltouch_control_pin=PB1,
probe_pin=PB2,
# VAOC pins
vaoc_probe_pin=PC2
vaoc_neopixel_pin=PC6
vaoc_fan_pin=PE5 # fan 3
# 2 pin fans
fan_part_cooling_pin=PE6,
fan_toolhead_cooling_pin=PE0,
Expand Down
54 changes: 27 additions & 27 deletions boards/btt-manta-m8p-20/board-definition.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -34,9 +34,9 @@
"cs_pin": "PC13",
"diag_pin": "PF4",
"endstop_pin": "PF4",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR2": {
"title": "MOTOR 2",
Expand All @@ -47,9 +47,9 @@
"cs_pin": "PE3",
"diag_pin": "PF3",
"endstop_pin": "PF3",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR3": {
"title": "MOTOR 3",
Expand All @@ -60,9 +60,9 @@
"cs_pin": "PB9",
"diag_pin": "PF2",
"endstop_pin": "PF2",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR4": {
"title": "MOTOR 4",
Expand All @@ -73,9 +73,9 @@
"cs_pin": "PB5",
"diag_pin": "PF1",
"endstop_pin": "PF1",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR5": {
"title": "MOTOR 5",
Expand All @@ -86,9 +86,9 @@
"cs_pin": "PG14",
"diag_pin": "PF0",
"endstop_pin": "PF0",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR6": {
"title": "MOTOR 6",
Expand All @@ -99,9 +99,9 @@
"cs_pin": "PG10",
"diag_pin": "PC15",
"endstop_pin": "PC15",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR7": {
"title": "MOTOR 7",
Expand All @@ -110,9 +110,9 @@
"dir_pin": "PD3",
"uart_pin": "PD5",
"cs_pin": "PD5",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
},
"MOTOR8": {
"title": "MOTOR 8",
Expand All @@ -121,9 +121,9 @@
"dir_pin": "PC8",
"uart_pin": "PC6",
"cs_pin": "PC6",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
"spi_software_mosi_pin": "PG6",
"spi_software_miso_pin": "PG7",
"spi_software_sclk_pin": "PG8"
}
},
"ADXL345SPI": {
Expand All @@ -136,9 +136,9 @@
},
"stepperSPI": {
"software": {
"sclk": "PC10",
"mosi": "PC12",
"miso": "PC11"
"sclk": "PG8",
"mosi": "PG6",
"miso": "PG7"
}
}
}
16 changes: 10 additions & 6 deletions boards/btt-manta-m8p-20/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,11 +8,11 @@
[board_pins manta_m8p_tmc2209]
aliases:
# steppers
x_step_pin=PE6, x_dir_pin=PE5, x_enable_pin=PC14, x_uart_pin=PC13, x_diag_pin=PF4, x_endstop_pin=PF4,
x_step_pin=PE6, x_dir_pin=PE5, x_enable_pin=PC14, x_uart_pin=PC13, x_diag_pin=PF4, x_endstop_pin=PF4,
y_step_pin=PE2, y_dir_pin=PE1, y_enable_pin=PE4, y_uart_pin=PE3, y_diag_pin=PF3, y_endstop_pin=PF3,
z0_step_pin=PG9, z0_dir_pin=PD7, z0_enable_pin=PG11, z0_uart_pin=PG10, z0_diag_pin=null,
z1_step_pin=PD4, z1_dir_pin=PD3, z1_enable_pin=PD6, z1_uart_pin=PD5, z1_diag_pin=null,
z2_step_pin=PC7, z2_dir_pin=PC8, z2_enable_pin=PD2, z2_uart_pin=PC6, z2_diag_pin=null,
z0_step_pin=PG9, z0_dir_pin=PD7, z0_enable_pin=PG11, z0_uart_pin=PG10, z0_diag_pin=null, z_endstop_pin=PC15,
z1_step_pin=PD4, z1_dir_pin=PD3, z1_enable_pin=PD6, z1_uart_pin=PD5, z1_diag_pin=null,
z2_step_pin=PC7, z2_dir_pin=PC8, z2_enable_pin=PD2, z2_uart_pin=PC6, z2_diag_pin=null,
# Voron 2.4 support
z3_step_pin=PG13, z3_dir_pin=PG12, z3_enable_pin=PG15, z3_uart_pin=PG14, z3_diag_pin=null,
e_step_pin=PB8, e_dir_pin=PB7, e_enable_pin=PE0, e_uart_pin=PB9, e_diag_pin=null, e_heater_pin=PA0, e_sensor_pin=PB0,
Expand All @@ -22,6 +22,10 @@ aliases:
# auto leveling
bltouch_sensor_pin=PD13, bltouch_control_pin=PD12,
probe_pin=PD13,
# VAOC pins
vaoc_probe_pin=PF2
vaoc_neopixel_pin=PD15
vaoc_fan_pin=PF8 # fan 3
# 2 pin fans
fan_part_cooling_pin=PF7,
fan_toolhead_cooling_pin=PF9,
Expand All @@ -31,8 +35,8 @@ aliases:
4p_fan_part_cooling_tach_pin=PC2,
4p_toolhead_cooling_pin=PA2,
4p_toolhead_cooling_tach_pin=PC1,
4p_controller_board_pin=PA2,
4p_controller_board_tach_pin=PC1,
4p_controller_board_pin=PA4,
4p_controller_board_tach_pin=VF4,
# Bed heater
heater_bed_heating_pin=PF5,
heater_bed_sensor_pin=PB1,
Expand Down
7 changes: 5 additions & 2 deletions boards/btt-manta-m8p/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,17 +10,20 @@ aliases:
# steppers
x_step_pin=PE2, x_dir_pin=PB4, x_enable_pin=PC11, x_uart_pin=PC10, x_diag_pin=PF3, x_endstop_pin=PF3,
y_step_pin=PF12, y_dir_pin=PF11, y_enable_pin=PB3, y_uart_pin=PF13, y_diag_pin=PF4, y_endstop_pin=PF4,
z0_step_pin=PA10, z0_dir_pin=PD15, z0_enable_pin=PA15, z0_uart_pin=PF8, z0_diag_pin=null,
z0_step_pin=PA10, z0_dir_pin=PD15, z0_enable_pin=PA15, z0_uart_pin=PF8, z0_diag_pin=null, z_endstop_pin=PC2,
z1_step_pin=PD12, z1_dir_pin=PD11, z1_enable_pin=PD14, z1_uart_pin=PD13, z1_diag_pin=null,
z2_step_pin=PD10, z2_dir_pin=PD8, z2_enable_pin=PD9, z2_uart_pin=PC7, z2_diag_pin=null,
z3_step_pin=PC9, z3_dir_pin=PC8, z3_enable_pin=PD1, z3_uart_pin=PD0, z3_diag_pin=null, # Voron 2.4 support on motor 5
z3_step_pin=PC9, z3_dir_pin=PC8, z3_enable_pin=PD1, z3_uart_pin=PD0, z3_diag_pin=null, # Voron 2.4 support on motor 5
e_step_pin=PD7, e_dir_pin=PD6, e_enable_pin=PF10, e_uart_pin=PF9, e_diag_pin=null, e_heater_pin=PE3, e_sensor_pin=PA1,
stepper_spi_mosi_pin=PA7, stepper_spi_miso_pin=PA6, stepper_spi_sclk_pin=PA5,
# accel
adxl345_cs_pin=PB15,
# auto leveling
bltouch_sensor_pin=PB2, bltouch_control_pin=PB1,
probe_pin=PB2,
# VAOC probe and neopixel
vaoc_probe_pin=PF5
vaoc_neopixel_pin=PC6
# 2 pin fans
fan_part_cooling_pin=PE6,
fan_toolhead_cooling_pin=PE0,
Expand Down
16 changes: 10 additions & 6 deletions boards/btt-octopus-11-407/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,19 +8,23 @@
[board_pins octopus_11_407_tmc2209]
aliases:
# steppers
x_step_pin=PF13, x_dir_pin=PF12, x_enable_pin=PF14, x_uart_pin=PC4, x_diag_pin=PG6, x_endstop_pin=PG6,
y_step_pin=PG0, y_dir_pin=PG1, y_enable_pin=PF15, y_uart_pin=PD11, y_diag_pin=PG9, y_endstop_pin=PG9,
z0_step_pin=PC13, z0_dir_pin=PF0, z0_enable_pin=PF1, z0_uart_pin=PE4, z0_diag_pin=null,
x_step_pin=PF13, x_dir_pin=PF12, x_enable_pin=PF14, x_uart_pin=PC4, x_diag_pin=PG6, x_endstop_pin=PG6,
y_step_pin=PG0, y_dir_pin=PG1, y_enable_pin=PF15, y_uart_pin=PD11, y_diag_pin=PG9, y_endstop_pin=PG9,
z0_step_pin=PC13, z0_dir_pin=PF0, z0_enable_pin=PF1, z0_uart_pin=PE4, z0_diag_pin=null, z_endstop_pin=PG15,
z1_step_pin=PE2, z1_dir_pin=PE3, z1_enable_pin=PD4, z1_uart_pin=PE1, z1_diag_pin=null,
z2_step_pin=PE6, z2_dir_pin=PA14, z2_enable_pin=PE0, z2_uart_pin=PD3, z2_diag_pin=null,
z3_step_pin=PF9, z3_dir_pin=PF10, z3_enable_pin=PG2, z3_uart_pin=PF2, z3_diag_pin=null, # Voron 2.4 support
e_step_pin=PF11, e_dir_pin=PG3, e_enable_pin=PG5, e_uart_pin=PC6, e_diag_pin=null, e_heater_pin=PA2, e_sensor_pin=PF4,
z2_step_pin=PE6, z2_dir_pin=PA14, z2_enable_pin=PE0, z2_uart_pin=PD3, z2_diag_pin=null,
z3_step_pin=PF9, z3_dir_pin=PF10, z3_enable_pin=PG2, z3_uart_pin=PF2, z3_diag_pin=null, # Voron 2.4 support
e_step_pin=PF11, e_dir_pin=PG3, e_enable_pin=PG5, e_uart_pin=PC6, e_diag_pin=null, e_heater_pin=PA2, e_sensor_pin=PF4,
stepper_spi_mosi_pin=PA7, stepper_spi_miso_pin=PA6, stepper_spi_sclk_pin=PA5,
# accel
adxl345_cs_pin=PA15,
# auto leveling
bltouch_sensor_pin=PB7, bltouch_control_pin=PB6,
probe_pin=PB7,
# VAOC pins
vaoc_probe_pin=PG10
vaoc_neopixel_pin=PB0
vaoc_fan_pin=PD13 # fan 3
# fans
fan_part_cooling_pin=PA8,
fan_toolhead_cooling_pin=PE5,
Expand Down
2 changes: 1 addition & 1 deletion boards/btt-octopus-11/board-definition.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -3,7 +3,7 @@
"boardImageFileName": "board.webp",
"manualFileName": "manual.pdf",
"wireDiagramFileName": "wiring.drawio.svg",
"name": "Octopus V1.1 F446",
"name": "Octopus V1.1",
"manufacturer": "BIGTREETECH",
"id": "btt-octopus-11",
"firmwareBinaryName": "firmware-btt-octopus-11.bin",
Expand Down
16 changes: 10 additions & 6 deletions boards/btt-octopus-11/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,13 +8,13 @@
[board_pins octopus_11_tmc2209]
aliases:
# steppers
x_step_pin=PF13, x_dir_pin=PF12, x_enable_pin=PF14, x_uart_pin=PC4, x_diag_pin=PG6, x_endstop_pin=PG6,
y_step_pin=PG0, y_dir_pin=PG1, y_enable_pin=PF15, y_uart_pin=PD11, y_diag_pin=PG9, y_endstop_pin=PG9,
z0_step_pin=PC13, z0_dir_pin=PF0, z0_enable_pin=PF1, z0_uart_pin=PE4, z0_diag_pin=null, z_endstop_pin=PG10,
x_step_pin=PF13, x_dir_pin=PF12, x_enable_pin=PF14, x_uart_pin=PC4, x_diag_pin=PG6, x_endstop_pin=PG6,
y_step_pin=PG0, y_dir_pin=PG1, y_enable_pin=PF15, y_uart_pin=PD11, y_diag_pin=PG9, y_endstop_pin=PG9,
z0_step_pin=PC13, z0_dir_pin=PF0, z0_enable_pin=PF1, z0_uart_pin=PE4, z0_diag_pin=null, z_endstop_pin=PG15,
z1_step_pin=PE2, z1_dir_pin=PE3, z1_enable_pin=PD4, z1_uart_pin=PE1, z1_diag_pin=null,
z2_step_pin=PE6, z2_dir_pin=PA14, z2_enable_pin=PE0, z2_uart_pin=PD3, z2_diag_pin=null,
z3_step_pin=PF9, z3_dir_pin=PF10, z3_enable_pin=PG2, z3_uart_pin=PF2, z3_diag_pin=null, # Voron 2.4 support
e_step_pin=PF11, e_dir_pin=PG3, e_enable_pin=PG5, e_uart_pin=PC6, e_diag_pin=null, e_heater_pin=PA2, e_sensor_pin=PF4,
z2_step_pin=PE6, z2_dir_pin=PA14, z2_enable_pin=PE0, z2_uart_pin=PD3, z2_diag_pin=null,
z3_step_pin=PF9, z3_dir_pin=PF10, z3_enable_pin=PG2, z3_uart_pin=PF2, z3_diag_pin=null, # Voron 2.4 support
e_step_pin=PF11, e_dir_pin=PG3, e_enable_pin=PG5, e_uart_pin=PC6, e_diag_pin=null, e_heater_pin=PA2, e_sensor_pin=PF4,
# Hybrid CoreXY Single Toolhead
y1_step_pin=PG4, y1_dir_pin=PC1, y1_enable_pin=PA0, y1_uart_pin=PC7, y1_diag_pin=PG11,
x1_step_pin=PF9, x1_dir_pin=PF10, x1_enable_pin=PG2, x1_uart_pin=PF2, x1_diag_pin=PG12,
Expand All @@ -28,6 +28,10 @@ aliases:
# auto leveling
bltouch_sensor_pin=PB7, bltouch_control_pin=PB6,
probe_pin=PB7,
# VAOC pins
vaoc_probe_pin=PG10
vaoc_neopixel_pin=PB0
vaoc_fan_pin=PD13 # fan 3
# fans
fan_part_cooling_pin=PA8,
fan_toolhead_cooling_pin=PE5,
Expand Down
6 changes: 5 additions & 1 deletion boards/btt-octopus-max-ez/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@ aliases:
# steppers (Motor 1-7: X, Y, E, Z3, Z0, Z1, Z2, Motor 8-10: unused)
x_step_pin=PC13, x_dir_pin=PC14, x_enable_pin=PE6, x_uart_pin=PG14, x_diag_pin=PF0, x_endstop_pin=PF0,
y_step_pin=PE4, y_dir_pin=PE5, y_enable_pin=PE3, y_uart_pin=PG13, y_diag_pin=PF2, y_endstop_pin=PF2,
z0_step_pin=PB5, z0_dir_pin=PB4, z0_enable_pin=PB6, z0_uart_pin=PG10, z0_diag_pin=null, z_endstop_pin=PF4,
z0_step_pin=PB5, z0_dir_pin=PB4, z0_enable_pin=PB6, z0_uart_pin=PG10, z0_diag_pin=null, z_endstop_pin=PC15,
z1_step_pin=PG15, z1_dir_pin=PB3, z1_enable_pin=PD5, z1_uart_pin=PG9, z1_diag_pin=null,
z2_step_pin=PD3, z2_dir_pin=PD2, z2_enable_pin=PD4, z2_uart_pin=PD7, z2_diag_pin=null,
z3_step_pin=PB8, z3_dir_pin=PB9, z3_enable_pin=PB7, z3_uart_pin=PG11, z3_diag_pin=null, # Voron 2.4 support
Expand All @@ -23,6 +23,10 @@ aliases:
# auto leveling
bltouch_sensor_pin=PB15, bltouch_control_pin=PB14,
probe_pin=PB15,
# VAOC pins
vaoc_probe_pin=PF4
vaoc_neopixel_pin=PE10
vaoc_fan_pin=PA3 # fan 3
# 2p fans
fan_part_cooling_pin=PA6,
fan_toolhead_cooling_pin=PA5,
Expand Down
16 changes: 10 additions & 6 deletions boards/btt-octopus-pro-429/config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,13 +8,13 @@
[board_pins octopus_pro_429_tmc2209]
aliases:
# steppers
x_step_pin=PF13, x_dir_pin=PF12, x_enable_pin=PF14, x_uart_pin=PC4, x_diag_pin=PG6, x_endstop_pin=PG6,
y_step_pin=PG0, y_dir_pin=PG1, y_enable_pin=PF15, y_uart_pin=PD11, y_diag_pin=PG9, y_endstop_pin=PG9,
z0_step_pin=PC13, z0_dir_pin=PF0, z0_enable_pin=PF1, z0_uart_pin=PE4, z0_diag_pin=null,
x_step_pin=PF13, x_dir_pin=PF12, x_enable_pin=PF14, x_uart_pin=PC4, x_diag_pin=PG6, x_endstop_pin=PG6,
y_step_pin=PG0, y_dir_pin=PG1, y_enable_pin=PF15, y_uart_pin=PD11, y_diag_pin=PG9, y_endstop_pin=PG9,
z0_step_pin=PC13, z0_dir_pin=PF0, z0_enable_pin=PF1, z0_uart_pin=PE4, z0_diag_pin=null, z_endstop_pin=PG15,
z1_step_pin=PE2, z1_dir_pin=PE3, z1_enable_pin=PD4, z1_uart_pin=PE1, z1_diag_pin=null,
z2_step_pin=PE6, z2_dir_pin=PA14, z2_enable_pin=PE0, z2_uart_pin=PD3, z2_diag_pin=null,
z3_step_pin=PF9, z3_dir_pin=PF10, z3_enable_pin=PG2, z3_uart_pin=PF2, z3_diag_pin=null, # Voron 2.4 support
e_step_pin=PF11, e_dir_pin=PG3, e_enable_pin=PG5, e_uart_pin=PC6, e_diag_pin=null, e_heater_pin=PA2, e_sensor_pin=PF4,
z2_step_pin=PE6, z2_dir_pin=PA14, z2_enable_pin=PE0, z2_uart_pin=PD3, z2_diag_pin=null,
z3_step_pin=PF9, z3_dir_pin=PF10, z3_enable_pin=PG2, z3_uart_pin=PF2, z3_diag_pin=null, # Voron 2.4 support
e_step_pin=PF11, e_dir_pin=PG3, e_enable_pin=PG5, e_uart_pin=PC6, e_diag_pin=null, e_heater_pin=PA2, e_sensor_pin=PF4,
stepper_spi_mosi_pin=PA7, stepper_spi_miso_pin=PA6, stepper_spi_sclk_pin=PA5,
# Hybrid CoreXY Single Toolhead
y1_step_pin=PG4, y1_dir_pin=PC1, y1_enable_pin=PA0, y1_uart_pin=PC7, y1_diag_pin=PG11,
Expand All @@ -27,6 +27,10 @@ aliases:
# auto leveling
bltouch_sensor_pin=PB7, bltouch_control_pin=PB6,
probe_pin=PB7,
# VAOC pins
vaoc_probe_pin=PG10
vaoc_neopixel_pin=PB0
vaoc_fan_pin=PD13 # fan 3
# fans
fan_part_cooling_pin=PA8,
fan_toolhead_cooling_pin=PE5,
Expand Down
Loading
Loading