ldo-nitehawk-36 wirering & files #280
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
- board.webp - wirering diagram - wirering.drawio.svg - wirering diagram as svg file - nitehawk-36-board.png - made this photo from my board - nitehawk-36-usb-board.png - source: https://www.filastruder.com/cdn/shop/files/NiteHawk-SB_05_2048x.jpg?v=1720633207 - beacon3d.png - removed "RevH" source: http://beacon3d.com/wp-content/uploads/2023/11/RevH-LP-100x100.png additional: - dfubooting.jpg - source: https://docs.ldomotors.com/nk36_buttons.jpg - nh36_pcb_pinout.jpg - source: https://docs.ldomotors.com/nh36_pcb_pinout1.jpg - system_overview-1.jpg - source: https://docs.ldomotors.com/system_overview-1.jpg
- board.webp - wirering diagram - wirering.drawio.svg - wirering diagram as svg file - nitehawk-36-board.png - made this photo from my board - nitehawk-36-usb-board.png - source: https://www.filastruder.com/cdn/shop/files/NiteHawk-SB_05_2048x.jpg?v=1720633207 - beacon3d.png - removed "RevH" source: http://beacon3d.com/wp-content/uploads/2023/11/RevH-LP-100x100.png additional: - dfubooting.jpg - source: https://docs.ldomotors.com/nk36_buttons.jpg - nh36_pcb_pinout.jpg - source: https://docs.ldomotors.com/nh36_pcb_pinout1.jpg - system_overview-1.jpg - source: https://docs.ldomotors.com/system_overview-1.jpg
graphics for the Toolheadboard and the USB-Adapterboard: orbitool2.png orbitool2_usb-adapter.png --> 3-wire-x_endstop: board.webp wiring.drawio.svg --> 2-wire-x_endstop: wiring_x_endstop-2-wire.drawio.svg board_x_enndstop-2-wire.webp
- X-Endstop on 2PIN (PB0,GND) -> draw an optional 5V Line to RGB PIN (+5V) - Added RGB-SK6812 as an example for RGB. Created the graphics in onshape and exported it to avoid copyright problems --> if RGB isn't wanted I can delete it and upload without
wrong PIN (took the one for Probe)
- Changed the x_endstop PIN from 3Wire probe-pin to 2Wire x_endstop pin. --> had to the 5V from the probe pin as the Jumper for 5V/24V Voltage is used for both Part Cooling Fans. --> Added RGB, the graphics for this I created myself to avoid any copyright issues, if RGB is not wanted just gibe me a message.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
additional: