Merge pull request #68 from porschemad911/s922x-recovery-installation

OGU / Max 3 Pro - update recovery / installation details
ROCKNIX · Jan 18, 2025 · b98d6f6 · b98d6f6
2 parents 9526efe + a93be5d
commit b98d6f6
Show file tree

Hide file tree

Showing 2 changed files with 9 additions and 9 deletions.
diff --git a/docs/devices/hardkernel/odroid-go-ultra.md b/docs/devices/hardkernel/odroid-go-ultra.md
@@ -53,12 +53,12 @@ To install ROCKNIX to the eMMC, you need to boot the device into recovery mode.
 
 1. Hardkernel Recovery SD
 
-- Download [this recovery image](https://wiki.odroid.com/odroid_go_ultra/os_image/recovery)
-- Follow the recovery steps on [the Odroid wiki](https://wiki.odroid.com/odroid_go_ultra/getting_started/recovery_eMMC)
+  - Download [this recovery image](https://wiki.odroid.com/odroid_go_ultra/os_image/recovery)
+  - Follow the recovery steps on [the Odroid wiki](https://wiki.odroid.com/odroid_go_ultra/getting_started/recovery_eMMC)
 
 2. ROCKNIX Recovery
 
-- hold ++"Volume Down"++ while the device boots.  
+  - hold ++"Volume Down"++ while the device boots.  
 
 Once booted into recovery mode and connected to a PC via USB-C, the ROCKNIX image may be flashed to the eMMC using Balena Etcher, win32diskimager, dd or similar.
 

diff --git a/docs/devices/powkiddy/rgb10-max-3-pro.md b/docs/devices/powkiddy/rgb10-max-3-pro.md
@@ -53,11 +53,11 @@ To install ROCKNIX to the eMMC, you need to boot the device into recovery mode.
 
 1. Hardkernel Recovery SD
 
-- Download [this recovery image](https://wiki.odroid.com/odroid_go_ultra/os_image/recovery).
-- Flash the image to a spare microSD card using Balena Etcher or similar.
-- Remove the back cover of the device (four screws).
-- Locate a small button on the back of the board (the side that's visible), near the right thumbstick.
-- While holding down the small button, power on the device.
+  - Download [this recovery image](https://wiki.odroid.com/odroid_go_ultra/os_image/recovery).
+  - Flash the image to a spare microSD card using Balena Etcher or similar.
+  - Remove the back cover of the device (four screws).
+  - Locate a small button on the back of the board (the side that's visible), near the right thumbstick.
+  - While holding down the small button, power on the device.
 
 The device should now be in recovery mode, ready to flash ROCKNIX (or other firmware) to the device.
 
@@ -67,7 +67,7 @@ If you find yourself doing this often, consider drilling a pinhole in the back c
 
 2. ROCKNIX Recovery
 
-- hold ++"Volume Down"++ while the device boots.  
+  - hold ++"Volume Down"++ while the device boots.  
 
 Once booted into recovery mode and connected to a PC via USB-C, the ROCKNIX image may be flashed to the eMMC using Balena Etcher, win32diskimager, dd or similar.