Creating attachment subfolder

CNC/CNC Project Showcase.md

@@ -2,17 +2,17 @@
 
 ### MDF Wing Forms
 Dual Layer
-![[PXL_20240729_190949474.jpg|400]] 
+![[pxl_20240729_190949474.jpg|400]] 
 Single Layer
-![[PXL_20240722_170217056.jpg|400]]
+![[pxl_20240722_170217056.jpg|400]]
 ### Plywood Camp Sign
-![[PXL_20240702_180558808.jpg|350]]![[PXL_20240715_142834985 1.jpg|350]]
+![[pxl_20240702_180558808.jpg|350]]![[PXL_20240715_142834985 1.jpg|350]]
 ### Foam Topo Map
 ![[Pasted image 20240702142641.png|700]]
 ### Wood Air Foil Form
 ![[Pasted image 20240620173103.png|700]]
 ### Aluminum Faceplate
-![[PXL_20240606_214558811.jpg|700]]
+![[pxl_20240606_214558811.jpg|700]]
 ## Spring 2024
 ### Foam Topo Map
 ![[Pasted image 20240507155313.png|700]]
@@ -21,7 +21,7 @@ Single Layer
 ### Plywood Flat Pack Desk
 ![[Pasted image 20240507155011.png|700]]
 ### Cherry Speaker Cabinets
-![[PXL_20240408_194056440.jpg|400]]
+![[pxl_20240408_194056440.jpg|400]]
 
 ### Brass Retirement Engraving
 ![[Pasted image 20240507160846.png|700]]

CNC/Laguna CNC Operation Instructions.md

@@ -6,7 +6,7 @@
 ### Tool Holder Assembly
 ![[Pasted image 20240425152207.png]]
 ### Tool Rack
-![[PXL_20240319_145331118.jpg|400]]
+![[pxl_20240319_145331118.jpg|400]]
 - Tool rack has space for up to 8 tools, numbered 1-8 (left to right as viewed from front)
 ### Pressure Regulator
 ![[Pasted image 20240425144427.png]]
@@ -166,7 +166,7 @@
 		- Select "Check Code"
 		- Wait for check to complete, indicated by a blue check mark or a reported error
 			- Checkmark does NOT stay on screen, must watch for it  
-![[PXL_20240319_172848682.jpg|500]]
+![[pxl_20240319_172848682.jpg|500]]
 - Load a tool into the toolhead (if not already loaded)
 	- Option 1 - Auto Touchoff (Recommended)
 		- Setup > CNC Tool Data 
@@ -199,7 +199,7 @@
 		- Spindle can be stopped (optional) via
 			- Main > Settings
 			- Set "Spindle Override" to 0%
-![[PXL_20240319_173301916.jpg|500]]
+![[pxl_20240319_173301916.jpg|500]]
 - Resume Operation (Optional)
 	- If spindle was turned off, (0%), set "Spindle Override" to 100%
 		- DO NOT resume cut operation with spindle at 0%, this could damage bits or the machine
@@ -225,8 +225,8 @@
 	- We will run the operations and observe whether any part of the tool head contacts the foam blocks.
 	- If the operation completes issue, we will install clamps in the EXACT space where the foam was located.
 
-![[PXL_20240320_165610904.jpg|350]]
-![[PXL_20240320_170425712.jpg|350]]
+![[pxl_20240320_165610904.jpg|350]]
+![[pxl_20240320_170425712.jpg|350]]
 #### Feeds & Speeds
 - Many tool manufacturers provide feed & speed recommendations for their tools. These settings provide a good starting point and should be utilized when dialing in settings for new materials. It is important to note the RPM ratings on bits and not to exceed these values when setting up operations.
 - Most of the tools used in the Laguna CNC are from Amana Tools. Amana has a Fusion 360 library of their bit offerings, including all the relevant numbers and measurements which describe the tools geometry (number of cutting flutes, length of flutes, bit diameter, etc).
@@ -243,7 +243,7 @@
 	- [[Solid-Carbide-Spiral-Plunge-2-3-Flute-v26.pdf]]
 	- https://www.amanatool.com/pub/media/productattachments/Solid-Carbide-Spiral-Plunge-2-3-Flute-v26.pdf
 #### Adding / Swapping Bits in Tool Change Rack
-![[PXL_20240321_172025118.jpg|300]]
+![[pxl_20240321_172025118.jpg|300]]
 - Choose collet corresponding to bit shank diameter
 	- Collet size engraved on front face
 	- 1/8", 1/4", 3/8", 1/2" imperial sizes available
@@ -253,10 +253,10 @@
 	- The bit shank should be inserted a minimum of 2/3 (100% ideal) of the collet length
 		- For example, a 1.5" length collet requires at least 1" of bit shank inserted, however ideal insert length is 1.5"
 - Finish tightening bit in collet using "ER 32" wrench & CNC tool mount bracket
-![[PXL_20240319_144259489.jpg|300]]
-![[PXL_20240319_171946523.jpg|300]]
+![[pxl_20240319_144259489.jpg|300]]
+![[pxl_20240319_171946523.jpg|300]]
 - Press & hold green button on side of spindle
--  ![[PXL_20240319_172014827.jpg|300]]
+-  ![[pxl_20240319_172014827.jpg|300]]
 - Position tool holder under spindle head
 - Release green button
 

DemoBoard/Prototyping Studio Demo Board.md

@@ -1,4 +1,4 @@
- ![[PXL_20240822_144006532.png|500]]
+ ![[pxl_20240822_144006532.png|500]]
 ## Code Repository
 https://github.com/Prototyping-Studio/demoBoardPublic/
 ### Commonly Used Headers
@@ -31,7 +31,7 @@ https://github.com/adafruit/Adafruit_VS1053_Library
 ### Sample Code
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/music_demo/music_demo.ino
 ## Arcade Button Node
-![[PXL_20240822_160133655.png|300]]
+![[pxl_20240822_160133655.png|300]]
 ### Hardware
 Arcade Button Breakout https://www.adafruit.com/product/5296
 Arcade Button https://www.adafruit.com/product/3430
@@ -42,7 +42,7 @@ Arduino "Metro Mini" https://www.adafruit.com/product/2590
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/arcade_button_demo/arcade_button_demo.ino
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/arcade_button_demo/ButtonLED.h
 ## LCD Display Node
-![[PXL_20240822_154147049.png|400]]
+![[pxl_20240822_154147049.png|400]]
 ### Hardware
 
 LCD Display https://www.adafruit.com/product/181
@@ -51,38 +51,38 @@ Arduino "Metro Mini" https://www.adafruit.com/product/2590
 ### Sample Code
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/lcd_demo/lcd_demo.ino
 ## Air Quality Node
-![[PXL_20240716_214940816.jpg|400]]
+![[pxl_20240716_214940816.jpg|400]]
 ### Hardware
 SGP30 Air Quality Sensor https://www.adafruit.com/product/3709
 Arduino "Metro Mini" https://www.adafruit.com/product/2590
 ### Sample Code
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/air_quality_demo/air_quality_demo.ino
 ## LED Matrix Node
-![[PXL_20240715_201005331.jpg|300]]
+![[pxl_20240715_201005331.jpg|300]]
 ### Hardware
 https://www.adafruit.com/product/3444
 ![[Pasted image 20240711092417.png]]
 https://learn.adafruit.com/assets/63279
 ### Sample Code
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/matrix_demo/matrix_demo.ino
 ## IR Distance Node
-![[PXL_20240711_130039653.jpg|300]]
+![[pxl_20240711_130039653.jpg|300]]
 ### Hardware
 
 IR Sensor https://www.adafruit.com/product/164
 Arduino "Metro" https://www.adafruit.com/product/2488
 ### Sample Code
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/ir_demo/ir_demo.ino
 ## Servo / Linear Actuator Node
-![[PXL_20240822_155323516.jpg|300]]
+![[pxl_20240822_155323516.jpg|300]]
 ### Sample Code
 https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/servo_demo/servo_demo.ino)
 ### Hardware
 https://www.thingiverse.com/thing:3170748
 ### Wiring
 ![[Pasted image 20240814122014.png]]
 ## PIR Node
-![[PXL_20240822_154500545.jpg|300]]
+![[pxl_20240822_154500545.jpg|300]]
 ### Sample Code
 [Sample Code](https://github.com/Prototyping-Studio/demoBoardPublic/blob/master/pir_demo/pir_demo.ino)
 ### Hardware

Maintenance/Prototyping Studio Maintenance Resources.md

@@ -1,40 +1,40 @@
 ## Print Quality Troubleshooting Guide
-![Troubleshooting Guide](../attachments/pasted-image-20240819091655.png)
+![Troubleshooting Guide](pasted-image-20240819091655.png)
 https://www.simplify3d.com/resources/print-quality-troubleshooting/
 ## Hot End Components
-[[attachments/pasted-image-20240819101345.png|500]]
+[[pasted-image-20240819101345.png|500]]
 [Anatory of a Hotend](https://e3d-online.com/blogs/news/anatomy-of-a-hotend)
 ## Prusa MK3S
-[[attachments/pasted-image-20240819095720.png|600]]
+[[pasted-image-20240819095720.png|600]]
 ### Documentation
 https://help.prusa3d.com/tag/mk3s
 ### Cold Pull Procedure
 https://help.prusa3d.com/article/cold-pull-mk3s-mk2-5s_2075
 ### First Layer Calibration
-[[attachments/pasted-image-20240819094609.png|400]]
+[[pasted-image-20240819094609.png|400]]
 https://help.prusa3d.com/article/first-layer-calibration-i3_112364
 ### Nozzle Replacement
-[[attachments/pasted-image-20240819094736.png|400]]
+[[pasted-image-20240819094736.png|400]]
 https://help.prusa3d.com/article/changing-or-replacing-the-nozzle-mk2-5s-mk3s-mk3s-mk3-5_2069
 ### STLs
 
 #### Fan Shroud
-[[attachments/pasted-image-20240819092845.png|300]]
+[[pasted-image-20240819092845.png|300]]
 [[fan-shroud.stl]]
 #### Calibration Cube
-[[attachments/pasted-image-20240819092712.png|300]]
-[[Cube_Prusa_v1.stl]]
+[[pasted-image-20240819092712.png|300]]
+[[cube_prusa_v1.stl]]
 ## LDO Voron 2.4 R2 Rev A
-[[attachments/pasted-image-20240819095610.png|600]]
+[[pasted-image-20240819095610.png|600]]
 ### [Setting Belt Tension](https://docs.vorondesign.com/tuning/secondary_printer_tuning.html#belt-tension)
 ### STLs
 
 #### Test Grid
-[[attachments/pasted-image-20240819093718.png|300]]
-[[Voron_Test_Grid_v2.stl]]
+[[pasted-image-20240819093718.png|300]]
+[[voron_test_grid_v2.stl]]
 #### Calibration Cube
-[[attachments/pasted-image-20240819093604.png|300]]
-[Calibration Cube](Voron_Design_Cube_v7.stl)
+[[pasted-image-20240819093604.png|300]]
+[Calibration Cube](voron_design_cube_v7.stl)
 ## Configuration File Repository
 - Requires Github account & invite to Prototyping Studio team
 - Contains slicer profiles & klipper config files