Skip to content

Opentrons/Protocols

Repository files navigation

Opentrons Protocol Library

This is where Opentrons protocols are stored for everyone to use.

The master branch populates http://protocols.opentrons.com/, our Protocol Library. Please let us know if you would like to contribute your protocols, or just submit a pull request. We would love to add your Opentrons protocols to the Library!

All the best,

Will Canine Co-Founder, Opentrons [email protected]

Contributing

develop staging branch

The develop branch populates the staging version of the Opentrons Protocol Library at http://develop.protocols.opentrons.com/. Pull requests should be made to develop to be staged, and we will merge the changes into master as a second step.

Formatting protocols

Every protocol needs its own folder. In that folder, there needs to be:

  • A single README.md readme file
  • A single .py Opentrons protocol file
  • Optional "dot files" (see below)

README file format

Every protocol should have a README file in its folder, with the file name README.md. It is a Markdown file, with a specific format. See template/README.md for an example.

"Dot files"

"Dot files" are files inside a protocol folder which start with a dot (.).

These files are usually blank text files. They have special names that indicate specific properties for that protocol:

  • .feature - The protocol will be listed under "Featured Protocols" on the website.
  • .ignore - The protocol will not be shown on the Opentrons Protocol Library, even if you search for it.
  • .notests - The protocol will not be tested by continuous integration. This is intended only for ignored protocols.
  • .embedded - This is for "embedded apps" that generate a protocol and are designed to be shown in the Protocol Library in an iframe. This file should not be blank, it should contain a URL to the web app that will be embedded in the iframe.
  • .hide-from-search - do not show this protocol in any search results. The protocol page should only be accessible from direct URL.

Writing Custom Protocols

NOTE

Custom protocols is an early-stage feature, under active development. They are subject to change.

Part 1: Set up basic protocol

In the Protocol APIv2 def run(context): function, use context to load your pipettes, labware, and modules. Proceed with the protocol steps.

For some protocols, you might want "number of destination plates" to be a variable. However, the deck map on the website is currently not dynamic - it will only show containers loaded at the top of the file. For this reason, you should load all the containers you might need in the first lines of the run function body, and then only use what you need during the actual execution.

PLEASE NOTE! The convention for APIv2 protocol file names is protocols/{NAME}/{NAME}.ot2.apiv2.py. The "{NAME}" should match the name of the folder in protocols. Eg in the folder protocols/my_cool_protocol/ the Python file should be called my_cool_protocol.ot2.apiv2.py.

Part 2: Set your customizable arguments

To make a protocol customizable, write a fields.json file and save it in the protocol folder, as a sibling of the .ot2.apiv2.py file. Eg protocols/my_cool_protocol/fields.json.

The information in the fields.json file will be used to create input forms on the Protocol Library website page for your protocol, which get passed into the protocol.

The fields.json file should be an array of field objects. Here's an example:

[
  {
    "type": "float",
    "label": "Master Mix Volume (uL)",
    "name": "master_mix_volume",
    "default": 20
  },
  {
    "type": "int",
    "label": "Integer example",
    "name": "integer_example",
    "default": 10
  },
  {
    "type": "dropDown",
    "label": "Example Dropdown",
    "name": "example_dropdown",
    "options": [
      { "label": "Something here", "value": "aaa" },
      { "label": "Other thing", "value": "bbb" }
    ]
  },
  {
    "type": "textFile",
    "label": "Example file",
    "name": "example_file",
    "default": "1,2,3"
  }
]

Get values in the Python protocol with get_values

To allow you to get the parametric values inside the protocol, a function def get_values(*names) will be injected into the Python protocol when a user downloads the protocol from the site. It returns an array of values for each of the field names you give it as arguments.

import opentrons

def run(context):
    [example_dropdown, integer_example, float_example, example_file] = get_values(  # noqa: F821
        'example_dropdown', 'integer_example', 'float_example', 'example_file')

    # ... do stuff with those values

Linting error?

You should expect to get a linting error: [F821] undefined name 'get_values'. That's OK, because the special get_values fn will be injected into the protocol at download time.

To avoid this linting error from failing the build in CI, make sure to add # noqa: F821 inline with all calls to get_values

name

This field is used as an ID for accessing a field. If you have a field with "name": example_field" in fields.json, in the Python protocol you use that same name to get the value get_values('example_field')

Each field must have a unique name, otherwise unexpected behavior may occur.

type

The type field specifies what kind of input field you want. The options are float, int, str, dropDown, or textFile.

label

This is the human-readable label shown on the website describing what the user should enter in the field.

float & int type

An int will not allow floating-point values to be entered from the website. A float will allow any number of decimal places.

// float example:
{
    "type": "float",
    "label": "Master Mix Volume (uL)",
    "name": "master_mix_volume",
    "default": 20
}

// int example:
{
    "type": "int",
    "label": "Integer example",
    "name": "integer_example",
    "default": 10
}

str type

A field that lets users type in arbitrary text, read into the Python protocol as a string. Useful for things like entering a single well eg "B2".

{
  "type": "str",
  "label": "Example String",
  "name": "example_string",
  "default": "blah"
}

dropDown type

A dropDown will make a dropdown (aka select) UI widget.

Describe the options that are available in the dropdown by specifying the label (the text that the user sees) and the value (the text that get_values('example_dropdown') uses)

{
  "type": "dropDown",
  "label": "Example Dropdown",
  "name": "example_dropdown",
  "options": [
    { "label": "Something here", "value": "aaa" },
    { "label": "Other thing", "value": "bbb" }
  ]
}

If the user selects "Other thing", [x] = get_values('example_dropdown') will give you x === "bbb".

Note that unlike other field types, dropDown has no default. Instead, it will always default to the first option.

textFile type

This creates a file upload widget.

It's important for PL that you specify a working default value so that the protocol can be simulated using that default value.

{
  "type": "textFile",
  "label": "Example file",
  "name": "example_file",
  "default": "1,2,3"
}
Common Use Case: CSV file upload

Here's a useful function for working with CSV files. Remember, the file will just be read as a string. It's up to your protocol to parse that string into a useful data format.

def well_csv_to_list(csv_string):
    """
    Takes a csv string and flattens it to a list, re-ordering to match
    Opentrons API well order convention (A1, B1, C1, ..., A2, B2, B2, ...).

    The orientation of the CSV cells should match the "landscape" orientation
    of plates on the OT-2: well A1 should be on the top left cell. Example:

    A1, B1, C1, ...
    A2, B2, C2, ...
    A3, B3, C3, ...

    Returns a list: [A1, B1, C1, ..., A2, B2, C3, ...]
    where each CSV cell is a string in the list.
    """
    return [
        well for row in csv_string.split('\n') if row
        for well in row.split(',') if well]

def run(context):
    [example_file] = get_values('example_file')
    # pass the file contents string into this utility fn
    well_list = well_csv_to_list(example_file)

Validation? Nope

Basic validation exists for int and float types, though it's possible to get the string 'NaN'.

Field/form validation, such as setting min and max values, is not currently supported.

If any validation is necessary, add it in the protocol itself, eg:

def run(context):
    [some_field, other_field] = get_values(  # noqa: F821
        'some_fields', 'other_field')
    assert some_field > 0
    assert other_field + some_field <= 96
    # et cetera

    # ... do stuff here ...