Skip to content
This repository has been archived by the owner on Jun 23, 2023. It is now read-only.

SW102 software update

Kevin Hester edited this page Aug 13, 2019 · 2 revisions

Note: this page is a work in progress.

Note: for initial installation you don't want this page. Go here instead.

We haven't written instructions on how to use the Bluetooth updater yet. But in short:

  • Install "nRF Toolbox" from your appstore of choice
  • Download our sw102-otauptdate-xxx.zip file onto your phone (do not unzip)
  • Press and hold the M key on the SW102, then press and hold the power button. Keep both buttons pressed down for at least eight seconds. You can then release the buttons. You will know you are in the bootloader if the screen stays dark.
  • Run the "nRF Toolbox" app and click on "DFU" (for device firmware upgrade)
  • Select our zip file. If it also prompts you to ask what sort of "scope" choose "application only"
  • Click on "select device"
  • Click on "start upload"
  • After the upload completes turn your bike completely off
  • Then start your new SW102 load as normal (a long press on the power button)
Clone this wiki locally